< Back ×
< Back to View All
Engine & Drivetrain
- Department
- Brands
- Prices
Denso® A/C Compressor with Clutch for Land Rover Defender 90
PartNumber: 471-1348Product Specifications- Clutch Maximum Diameter: 130.0 mm
- Compressor Mount Hole Quantity: 4
- Mounting Type: Bolt Tangent
- OE Part Number: LRNA015106, BTR5750, LRNA350004A
- Pulley Belt Type: Serpentine
- Refrigerant Type: R134A
- UPC: 042511166424
- Part Description: Land Rover Defender 90 A/C Compressor with Clutch
$319.99
Gates® 90 Degree Hvac Heater Molded Hose for Land Rover Defender 90
PartNumber: 28474Product Specifications- Angle: 90
- Arm Length 1 (in): 4
- Arm Length 1 (mm): 102
- Arm Length 2 (in): 6
- Arm Length 2 (mm): 152
- Centerline Length (in): 10
- Centerline Length (mm): 254
- End 1 Inside Diameter: 0.75 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 9016
- UPC: 072053062083
- Part Description: Land Rover Defender 90 90 Degree Hvac Heater Molded Hose
$9.80
Four Seasons® A C Compressor With Clutch for Land Rover Defender 90
PartNumber: 78392Product Specifications- Clutch Included: Yes
- Clutch Maximum Diameter: 5.0625
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA17C
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 2.500
- Mount Distance MM: 63.500
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- O-Ring C Number/Desc: Not Required
- O-Ring C Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 128.575
- Pulley Groove Quantity: 7
- Pulley Lip Diameter: 5.0625
- Pulley Outside Diameter: 5.0625
- Pulley Ridge Diameter: 5.0625
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Terminal Type: Pin
- UPC: 096361783928
- Part Description: Land Rover Defender 90 A C Compressor With Clutch
$341.67
Four Seasons® A C Receiver Drier for Land Rover Defender 90
PartNumber: 33363Product Specifications- Body Diameter: 2.500
- Body Length: 6.000
- Bracket: w/o Bracket
- Connector B Type: Female O-Ring
- Connector Type: Male Insert O-Ring
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 63.500
- Fuse Plug: Yes
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Female
- Inlet Filter Fitting Thread Diameter: 0.625
- Inlet Filter Fitting Type: Female
- Inlet Fitting Diameter: 0.375
- Inlet Fitting Type: Male Insert O-Ring
- Inlet Fraction: 3/8
- Inlet IN: 0.375
- Inlet MM: 9.525
- Length MM: 152.400
- Material: Steel
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- O-Ring A Number/Desc: [24610] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24650] / Green O-Ring
- O-Ring B Quantity: 1
- O-Ring C Number/Desc: [24606] / Green O-Ring
- O-Ring C Quantity: 2
- Outlet Fitting Type: Female O-Ring
- Outlet Fraction: 3/8
- Outlet IN: 0.375
- Outlet MM: 9.525
- Overall Depth IN: 7.625
- Overall Depth MM: 193.675
- P. R. V.: No
- Service Port: w/o Service Port
- Sight Glass: Yes
- Stud: No
- Style: Steel Filter Drier
- Switch Port: w/ Switch Port
- Switch Port Dia. IN: 0.250
- Switch Port Dia.MM: 6.350
- UPC: 096361333635
- Part Description: Land Rover Defender 90 A C Receiver Drier
$13.52
Four Seasons® A C Receiver Drier for Land Rover Defender 90
PartNumber: 33321Product Specifications- Body Diameter: 2.500
- Body Length: 8.000
- Bracket: w/o Bracket
- Connector B Type: Male Insert O-Ring
- Connector Type: Male Insert O-Ring
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 63.500
- Fuse Plug: No
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Male
- Inlet Filter Fitting Thread Diameter: 0.625
- Inlet Filter Fitting Type: Male
- Inlet Fitting Diameter: 0.375
- Inlet Fitting Type: Male Insert O-Ring
- Inlet Fraction: 3/8
- Inlet IN: 0.375
- Inlet MM: 9.525
- Length MM: 190.500
- Material: Steel
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- New or Reman: New
- O-Ring A Number/Desc: [24606] / Green O-Ring
- O-Ring A Quantity: 2
- Outlet Fitting Type: Male Insert O-Ring
- Outlet Fraction: 3/8
- Outlet IN: 0.375
- Outlet MM: 9.525
- Overall Depth IN: 7.500
- Overall Depth MM: 190.500
- P. R. V.: No
- Service Port: w/o Service Port
- Sight Glass: Yes
- Stud: No
- Style: Steel Filter Drier
- Switch Port: w/ Switch Port
- Switch Port Dia. IN: 0.250
- Switch Port Dia.MM: 6.350
- UPC: 096361333215
- Part Description: Land Rover Defender 90 A C Receiver Drier
$16.50
National® A/C Compressor Clutch Ball Bearing for Land Rover Defender 90
PartNumber: 5001-KFFProduct Specifications- Part Description: Land Rover Defender 90 A/C Compressor Clutch Ball Bearing