26 products about 2008 Mazda CX-7 A/C & Heating found
Product Specifications- Includes Drier: No
- Mounting Hardware Included: No
- UPC: 042511207592
- Part Description: 2008 Mazda CX-7 A/C Condenser
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: w/ H12A1AL4CX Compressor; Reman w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 3.875
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 100
- Compressor Type: H12A1AK4DW
- Discharge Port Type: O-Ring
- Distance From Clutch To Mounting Flange: 1.40625
- Mount Distance MM: 35.814
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24610] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 98.425
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 3.875
- Pulley Outside Diameter: 3.875
- Pulley Ridge Diameter: 3.875
- Refrigerant Type: R134a
- Suction Port Type: O-Ring
- Terminal Type: Pin
- UPC: 096361974715
- Part Description: 2008 Mazda CX-7 Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: Cut to Fit; Reuse OEM Connector
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 19/32
- End 2 Inside Diameter: 11/16
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 27
- UPC: 036687331076
- Part Description: 2008 Mazda CX-7 Small Id Hvac Heater Hose
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Filter Type: Particulate
- Height: 0.984" (25mm)
- Length: 8.503" (216mm)
- OE Part Number: EG2161P11, 68406048AA, GJ6B61P11, 68406048AB, 68318365AA, LA183
- UPC: 765809245792
- Width: 7.677" (195mm)
- Part Description: 2008 Mazda CX-7 Cabin Air Filter
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: w/H12A1AL4CX Compressor;w/ H12A1AL4CX Compressor; Includes: 98471 (New Compressor), 83172 (Filter Drier), 39301 (Exp Valve), 59002 (Oil), O-Rings
- Components Included: New Compressor, Filter Drier, Expansion Valve, Oil, and O-Rings
- UPC: 096361088306
- Part Description: 2008 Mazda CX-7 Complete Air Conditioning Kit w/ New Compressor
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- UPC: 671607231991
- Part Description: 2008 Mazda CX-7 A/C Accumulator
Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: Y
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 20
- UPC: 036687412614
- Part Description: 2008 Mazda CX-7 Small Id Hvac Heater Hose
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: w/Built-In Drier Design
- Box Height (in): 8 1/4
- Box Length (in): 34 4/9
- Box Weight (lbs): 11 1/2
- Box Width (in): 23 2/9
- Construction: parallel flow
- Core Length: 26
- Core Thickness: 5/8
- Core Width: 17 5/9
- Hazardous Material: No
- Inlet Tube: Block Fitting
- OE Part Number: EHY4-61-48Z, EGY1-61-48ZC
- Outlet Tube: Tube
- Tech Note: Supplied with built-in Drier
- UPC: 710353105023
- Part Description: 2008 Mazda CX-7 A/C Condenser
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: w/ H12A1AL4CX Compressor; New w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 3.875
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 100
- Compressor Type: H12A1AL4CX
- Discharge Port Type: O-Ring
- Distance From Clutch To Mounting Flange: 1.40625
- Mount Distance MM: 35.814
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24610] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 98.425
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 3.875
- Pulley Outside Diameter: 3.875
- Pulley Ridge Diameter: 3.875
- Refrigerant Type: R134a
- Suction Port Type: O-Ring
- Terminal Type: Pin
- UPC: 096361984714
- Part Description: 2008 Mazda CX-7 A C Compressor With Clutch
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: Suction Line
- Bracket: w/o Bracket
- Component Type: Suction Line
- End 1 Type: Springlock
- End 2 Type: P-Nut Fitting
- Fittings Included: Included
- Gasket or Seal Included: Included
- Material: Aluminum / Rubber
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24220] / Spring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24670] / Green O-Ring
- O-Ring B Quantity: 3
- O-Ring C Number/Desc: [24676] / Green O-Ring
- O-Ring C Quantity: 1
- O.E. Replacement: Yes
- Refrigerant Type: R134-A
- Service Port: w/ Service Port
- Service Port Qty: 1
- Service Port Size: 13 mm
- Suction End Type: P-Nut Fitting
- Sve Port Low Side: Low Side
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- System Pressure: Low Pressure
- UPC: 096361559493
- Part Description: 2008 Mazda CX-7 A C Suction Line Hose Assembly
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: w/ Wheel
- Cage Wheel Included: w/ Wheel
- Connector Gender: Female
- Connector qty: 1
- Flanged End: Yes
- Material: Metal
- Motor Diameter: 3.250
- Motor Length: 3.3125
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: 2
- O.E. Replacement: Yes
- Rotation: CW
- Shaft Diameter: 0.3125
- Shaft Length: 1.875
- Style: Flanged
- Terminal Type: 2 Lead Wires w/ Connector
- UPC: 096361769113
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: 5.875
- Wheel Height IN: 2.750
- Part Description: 2008 Mazda CX-7 Hvac Blower Motor With Wheel
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Core Depth Fraction: 2-1/4
- Core Depth MM: 57.150
- Core Height Fraction: 9
- Core Height MM: 228.600
- Core Width Fraction: 10-1/8
- Core Width MM: 257.175
- Depth: 2.250
- Height: 9.000
- Inlet Fitting Type: Block Fitting
- Material: Aluminum
- O-Ring A Number/Desc: [24610] / Green O-Ring
- O-Ring A Quantity: 2
- Outlet Fitting Type: Block Fitting
- UPC: 096361440586
- Width: 10.125
- Part Description: 2008 Mazda CX-7 A C Evaporator Core
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: Discharge Line
- Bracket: w/o Bracket
- Component Type: Discharge Line
- Fittings Included: Included
- Gasket or Seal Included: Included
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 2
- O.E. Replacement: Yes
- Refrigerant Type: R134a
- Service Port: w/o Service Port
- Suction End Type: P-Nut Fitting
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- UPC: 096361559486
- Part Description: 2008 Mazda CX-7 A C Discharge Line Hose Assembly
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: To 5/1/08
- Color: Blue; Gray
- Comp Open/Closed: Open
- Connector Gender: Male
- Connector Shape: Oval; Round
- Fan Open/Closed: Open
- Fitting Gender: Male
- Fitting Thread Size: M11 x 1.00
- Item Included A Desc: 23678
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: Radiator Mount; System Mounted
- Number of Terminals: 4
- Operate Psi High Off: 455
- Operate Psi High On: 350
- Operate Psi Low Off: 28
- Operate Psi Low On: 29; 30
- Operate Psi Med Off: 180
- Operate Psi Med On: 220
- Style: Pressure
- Terminal Type: Pin
- UPC: 096361209442
- Voltage: 12
- Weather Pack: Yes
- Part Description: 2008 Mazda CX-7 A C Trinary Switch
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Connector Pin Qty: 4
- Connector Shape: Other design
- Gender: Female
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 4
- UPC: 096361098336
- Wire Length IN: 6.000
- Part Description: 2008 Mazda CX-7 A C Clutch Control Relay Harness Connector
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Connector Shape: Oval
- Gender: Male
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 2
- UPC: 096361010871
- Part Description: 2008 Mazda CX-7 Harness Connector
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: w/o ATC; From 5/1/08
- Connector Gender: Female
- Connector Shape: Rectangle
- Number of Terminals: 4
- UPC: 096361094048
- Part Description: 2008 Mazda CX-7 Hvac Blower Motor Resistor
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Color: Aluminum
- Liquid Inlet Fitting Gender: Female
- Liquid Inlet Fitting Thread Diameter: No. 6
- Liquid Inlet Style: FIO
- Liquid Inlet Type: Insert O-Ring
- Liquid Outlet Fitting Gender: Female
- Liquid Outlet Fitting Thread Diameter: No. 10
- Liquid Outlet Style: FIO
- Liquid Outlet Type: Insert O-Ring
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Hole Quantity: 2
- O-Ring A Number/Desc: [24607] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24610] / Green O-Ring
- O-Ring B Quantity: 3
- Refrigerant Type: R134A
- Style: w/o Solenoid
- Suction Inlet Fitting Gender: Female
- Suction Inlet Fitting Thread Diameter: No. 10
- Suction Inlet Style: FIO
- Suction Inlet Type: Insert O-Ring
- Suction Outlet Fitting Gender: Female
- Suction Outlet Fitting Thread Diameter: No. 10; No. 12
- Suction Outlet Style: FIO
- Suction Outlet Type: Insert O-Ring
- Super Heat: 5.500
- Switch Included: Not Included
- Tonnage: 1.000
- UPC: 096361393011
- Part Description: 2008 Mazda CX-7 A C Expansion Valve
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Body Diameter: 1.375
- Body Length: 11.000
- Connector B Type: Pad Mount
- Connector Type: Pad Mount
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 34.925
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Pad Mount
- Inlet Filter Fitting Type: Pad Mount
- Inlet Fitting Diameter: .482
- Inlet Fraction: 1/2
- Length MM: 279.400
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Bracket Included: Hardware not included
- O-Ring A Number/Desc: [24646] / Green Round O/Ring
- Outlet Fitting Type: Pad Mount
- Outlet Fraction: 1/2
- Outlet IN: .482
- Overall Depth IN: 11.000
- Overall Depth MM: 279.400
- Pad Mount: w/ Pad Mount
- Service Port: w/o Service Port
- Sight Glass: No
- Style: Aluminum Filter Drier w/ Pad Mount
- Switch Port: w/o Switch Port
- UPC: 096361831728
- Part Description: 2008 Mazda CX-7 Aluminum Filter Drier w/ Pad Mount
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: Caps and Valve Core Seal Kit
- Cap Color: Red, Blue
- Cap Inside Diameter: Specific
- Cap Material: Plastic
- Material: Aluminum
- Refrigerant Type: R12, R134a
- Style: Cap & Valve Kit
- UPC: 096361267831
- Valve Core Material: Specific
- Part Description: 2008 Mazda CX-7 A C System Valve Core And Cap Kit
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings, Metal spring O-Ring
- Style: O-Ring & Gasket Kit
- UPC: 096361267558
- Part Description: 2008 Mazda CX-7 A C System O Ring And Gasket Kit
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: Cut to Fit; Reuse OEM Connector
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: Y
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 29
- UPC: 036687332509
- Part Description: 2008 Mazda CX-7 Small Id Hvac Heater Hose
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | All Engines
Product Specifications- Notes: Grade: Aftermarket; Description: With O-Rings; Kit: Expert Kits +
- for OE number: GJ6A-61-J14B
- Height [mm]: 69
- Length [mm]: 34
- Packaging Depth [cm]: 9
- Packaging height [cm]: 9,2
- Packaging width [cm]: 4,9
- Weight [kg]: 0,216
- Width [mm]: 50
- Part Description: 2008 Mazda CX-7 A/C Expansion Valve
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
Product Specifications- Centerline Length (in): 13"
- Inside Diameter 1 (in): 0.27"
- Number of Branches: 0
- UPC: 770075545477
- Part Description: 2008 Mazda CX-7 Hvac Heater Molded Hose
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: OE Recommended Replacement filter; Premium electrostatically charged media; Captures ultra-fine particulates such as diesel carbon & smoke
- Filter Type: Electrostatic
- Length: 7.9"
- OE Part Number: EG2161P11
- UPC: 042511218017
- Width: 8.58"
- Part Description: 2008 Mazda CX-7 Cabin Air Filter
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L
Product Specifications- Notes: OE recommended replacement part.
- Body Diameter (mm): 34.925
- Body Length (mm): 279.400
- Inlet Fitting Type: FEMALE
- Material: Aluminum
- OE Part Number: GJ6A61501A
- Outlet Fitting Type: FEMALE
- Type: Block Union
- UPC: 042511222281
- Part Description: 2008 Mazda CX-7 A/C Receiver Drier
More Info Vehicle Fitment- 2008 Mazda CX-7 | All Trims | 4 Cyl 2.3L