Part Description: 2009 Chevrolet Express 2500 Balancer Asm-Crankshaft
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
FAQ for Harmonic Balancer Repair
Q: What is the recommended torque for the crankshaft balancer bolt on the first pass?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Omar
GM Specialist
03/02/2022
Q: What should you make sure about the installation?
A:
You need to make sure that the teeth of J 42386-A mesh with the teeth of the engine flywheel.
By Omar
GM Specialist
26/01/2022
FAQ for Other Repair Info
Q: Can you turn the crankshaft assembly off after the timing chain has been removed?
A:
No, do not turn the crankshaft assembly after the Timing Chain has been removed, to prevent damage to the piston assemblies or the valves.
Q: What should you pay attention to when removing or installing the camshaft?
A:
You should know that all Camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
Q: Why shouldn't you use belt dressing on the drive belt?
A:
Since belt dressing causes the breakdown of the composition of the Drive Belt. Failure to follow this recommendation will damage the drive belt.