Part Description: 2009 Chevrolet Express 2500 Serpentine Belt
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
$47.13MSRP: $85.32
You Save: $38.19 (45%)
FAQ for Drive Belt Repair
Q: What is the recommended torque for the retaining bolt?
A:
The recommended torque is 11 Nm (97 lb in).
By Bob
GM Specialist
01/02/2022
Q: What should you deal with the belt installation tool when the balancer is rotated clockwise?
A:
You need to release it from the belt in this situation.
By Omar
GM Specialist
27/01/2022
Q: Why do you need to rotate the drive belt tensioner clockwise?
A:
To relieve tension on the belt.
By Omar
GM Specialist
25/01/2022
Q: Why shouldn't you use belt dressing on the drive belt?
A:
Since belt dressing causes the breakdown of the composition of the drive belt. Failure to follow this recommendation will damage the drive belt.
By Omar
GM Specialist
25/01/2022
FAQ for Other Repair Info
Q: Can you turn the crankshaft assembly off after the timing chain has been removed?
A:
No, do not turn the crankshaft assembly after the Timing Chain has been removed, to prevent damage to the piston assemblies or the valves.
Q: What should you pay attention to when removing or installing the camshaft?
A:
You should know that all Camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
Q: Can you reuse the CMP solenoid valve?
A:
No, DO NOT use the CMP solenoid valve again. Install a NEW valve during assembly.