Part Description: 2009 Chevrolet Express 2500 Chain Asm-Timing
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L GAS
$62.67MSRP: $93.51
You Save: $30.84 (33%)
FAQ for Timing Chain Repair
Q: Can you turn the crankshaft assembly off after the timing chain has been removed?
A:
No, do not turn the crankshaft assembly after the timing chain has been removed, to prevent damage to the piston assemblies or the valves.
By Omar
GM Specialist
08/02/2022
Q: What kind of special tools will be used when removing the Camshaft Timing Chain and Sprocket?
A:
J8433-1 Puller Bar, J 41478 Crankshaft Front Oil Seal Installer, J 41558 Crankshaft Sprocket Remover, J 41665 Crankshaft Balancer, and Sprocket Installer, J 41816-2 Crankshaft End Protector.
By Bob
GM Specialist
28/01/2022
FAQ for Other Repair Info
Q: What should you pay attention to when removing or installing the camshaft?
A:
You should know that all Camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
Q: Why shouldn't you use belt dressing on the drive belt?
A:
Since belt dressing causes the breakdown of the composition of the Drive Belt. Failure to follow this recommendation will damage the drive belt.
Q: Can you reuse the CMP solenoid valve?
A:
No, DO NOT use the CMP solenoid valve again. Install a NEW valve during assembly.