< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Blazer
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2005 Chevrolet Blazer
PartNumber: 65-9359Product Specifications- Notes: with Propshaft Code CNR;with 29-1/8" (740 mm) Long Driveshaft;with NP1 Transfer Case;Supplied as new; Measurement is taken from U-Joint to end of CV Dust Shield
- Greasable: No
- Length: 29.125"
- Length (mm): 740
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2005 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
$368.73
OEM (Genuine) 2005 Chevrolet Blazer Shaft Kit, Front Upper Control Arm
PartNumber: 12385857
Product Specifications- Notes: 2WD; Blazer/Sonoma/S10
- Location: Driver Side; Passenger Side
- Item Dimensions: 4.5 x 4.5 x 17.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Shaft Kit, Front Upper Control Arm
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$51.39 MSRP:$103.65You Save: $52.26 (51%)
OEM (Genuine) 2005 Chevrolet Blazer Propeller Shaft Assembly
PartNumber: 15038492
Product Specifications- Notes: S-Series; 4WD; Blazer; 2 Door
- Other Names: Drive Shaft
- Item Weight: 14.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Propeller Shaft Assembly
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Propeller Shaft Assembly
PartNumber: 15036984Product Specifications- Notes: Blazer/Sonoma/S10; 4WD
- Other Names: Drive Shaft
- Item Dimensions: 39.2 x 4.0 x 3.7 inches
- Item Weight: 15.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Propeller Shaft Assembly
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Differential
PartNumber: 26046172
Product Specifications- Notes: S-Series; W/Limited Slip; 3.42 Ratio
- Other Names: Axle Assembly, Case
- Item Dimensions: 11.8 x 11.2 x 10.5 inches
- Item Weight: 19.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Differential
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Front Axle Assembly (3.42 Ratio)
PartNumber: 15756008
Product Specifications- Notes: 4WD, 3.42 Ratio (gu6), Stamped Ztn; Blazer/Sonoma/S10; 3.42 Ratio; Auto Trans
- Other Names: Axle Assembly, Differential Assembly
- Item Dimensions: 27.8 x 18.7 x 13.3 inches
- Item Weight: 70.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26046029
- Part Description: 2005 Chevrolet Blazer Front Axle Assembly (3.42 Ratio)
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Cardone Reman® Remanufactured Driveshafts for 2005 Chevrolet Blazer
PartNumber: 65-9332Product Specifications- Notes: with NP8 Transfer Case;with 29-3/4" (755 mm) Long Driveshaft;Measurement is taken from U-Joint to end of CV Dust Shield
- Greasable: No
- Length: 29.75"
- Length (mm): 755
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2005 Chevrolet Blazer Remanufactured Driveshafts
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
OEM (Genuine) 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
PartNumber: 93720063
Product Specifications- Notes: 4WD, 1997-05, W/O High Wider; S-Series; W/O High Wider Pkg.; Right; Blazer; W/O High Wider Pkg.; Right
- Location: Passenger Side
- Other Names: Axle Assembly, Output Shaft
- Item Dimensions: 6.2 x 6.2 x 29.4 inches
- Item Weight: 16.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26055048
- Part Description: 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Drive Shaft
PartNumber: 15038490Product Specifications- Notes: S-Series; 4WD; Blazer; 4 Door
- Other Names: Drive Shaft
- Item Dimensions: 48.2 x 3.8 x 3.8 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Drive Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Rear Axle Drive Shaft
PartNumber: 26050549
Product Specifications- Notes: 4WD, W/High Wider; S-Series; 2WD; Blazer; W/Limited Slip;S-Series; 4WD; All; Blazer; 29 1/2" Length
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 32.8 x 6.6 x 6.8 inches
- Item Weight: 14.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Rear Axle Drive Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Rear Axle Drive Shaft
PartNumber: 26058696
Product Specifications- Notes: 2WD; S-Series; 2WD; Blazer; W/O Limited Slip;S-Series; 4WD; All; Blazer; 26 1/2" Length
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 27.8 x 11.4 x 10.1 inches
- Item Weight: 15.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Rear Axle Drive Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Front Drive Axle Clutch Shaft
PartNumber: 26042726
Product Specifications- Notes: 4WD, Inner; Blazer/Sonoma/S10
- Other Names: Axle Shaft, Driven Shaft, Output Shaft
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Front Drive Axle Clutch Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Front Drive Axle Inner Shaft
PartNumber: 26053318
Product Specifications- Notes: 4WD, 4WD, Outer; Blazer/Sonoma/S10; Blazer
- Location: Driver Side
- Other Names: Axle Shaft, Shaft
- Item Dimensions: 16.5 x 3.7 x 3.4 inches
- Item Weight: 4.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Front Drive Axle Inner Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Propeller Shaft Assembly
PartNumber: 15036992Product Specifications- Notes: S-Series; 2WD; Auto Trans; S-Blazer/Jimmy; 2 Door
- Other Names: Drive Shaft
- Item Dimensions: 54.6 x 4.6 x 4.7 inches
- Item Weight: 18.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Propeller Shaft Assembly
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Propeller Shaft Assembly
PartNumber: 15036991Product Specifications- Notes: S-Series; 2WD; Auto Trans; S-Blazer/Jimmy; 4 Door; Blazer/Sonoma/S10; 2WD
- Other Names: Drive Shaft
- Item Dimensions: 61.4 x 4.3 x 4.4 inches
- Item Weight: 22.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26051106
- Part Description: 2005 Chevrolet Blazer Propeller Shaft Assembly
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Propeller Shaft Assembly
PartNumber: 15036993Product Specifications- Notes: S-Series; 2WD; Manual Trans; S-Blazer/Jimmy; 2 Door
- Other Names: Drive Shaft
- Item Dimensions: 53.1 x 4.5 x 4.6 inches
- Item Weight: 19.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Propeller Shaft Assembly
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
PartNumber: 26055053
Product Specifications- Notes: 4WD, 1997-05, W/High Wider; S-Series; W/High Wider Pkg.; Left; Blazer; W/High Wider Pkg.; Left
- Location: Driver Side
- Other Names: Axle Assembly
- Item Dimensions: 28.9 x 6.0 x 6.0 inches
- Item Weight: 17.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
PartNumber: 26055049Product Specifications- Notes: 4WD, 1997-05, W/High Wider; S-Series; W/High Wider Pkg.; Right; Blazer; W/High Wider Pkg.; Right
- Location: Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 34.2 x 5.3 x 5.2 inches
- Item Weight: 17.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
PartNumber: 26055052Product Specifications- Notes: 4WD, 1997-05, W/O High Wider; Blazer; W/O High Wider Pkg.; Left
- Location: Driver Side
- Other Names: Axle Assembly, Output Shaft
- Item Dimensions: 29.3 x 5.8 x 5.7 inches
- Item Weight: 19.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Front Drive Axle Inner Shaft
PartNumber: 26053319
Product Specifications- Notes: 4WD, 4WD, Outer
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 24.4 x 4.6 x 4.7 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Front Drive Axle Inner Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Rear Axle Drive Shaft
PartNumber: 26058547Product Specifications- Notes: Blazer; 2WD; 3.73 Ratio;Blazer; 4WD; 3.73 Ratio
- Other Names: Axle Shaft
- Item Dimensions: 28.1 x 6.2 x 6.3 inches
- Item Weight: 13.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Rear Axle Drive Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Rear Axle Drive Shaft
PartNumber: 26058079Product Specifications- Notes: Blazer; 4WD; 3.42 Ratio
- Other Names: Axle Shaft
- Item Dimensions: 50.4 x 11.4 x 8.2 inches
- Item Weight: 15.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Rear Axle Drive Shaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Shaft, Rear Axle
PartNumber: 26058925Product Specifications- Notes: Blazer; 2WD; 3.42 Ratio
- Other Names: Axle Shaft
- Item Dimensions: 27.6 x 6.3 x 6.6 inches
- Item Weight: 14.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Chevrolet Blazer Shaft, Rear Axle
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Driveshaft
PartNumber: 15162897
Product Specifications- Notes: All
- Part Description: 2005 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Driveshaft
PartNumber: 15756009Product Specifications- Notes: 4WD, 3.42 Ratio (gu6), Stamped Ztu; Blazer/Sonoma/S10; 3.42 Ratio; Manual Trans
- Part Description: 2005 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Driveshaft
PartNumber: 15756010
Product Specifications- Notes: 4WD, 3.73 Ratio (gt4), Stamped Ztp; Blazer
- Part Description: 2005 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Driveshaft
PartNumber: 15756011Product Specifications- Notes: 4WD, 3.73 Ratio (gt4), Stamped Ztr; Blazer/Sonoma/S10; 3.73 Ratio; Auto Trans
- Part Description: 2005 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Driveshaft
PartNumber: 15756012Product Specifications- Notes: Blazer/Sonoma/S10; 3.73 Ratio; Manual Trans
- Part Description: 2005 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2005 Chevrolet Blazer Driveshaft
PartNumber: 93720062Product Specifications- Notes: S-Series; W/O High Wider Pkg.; Left
- Part Description: 2005 Chevrolet Blazer Driveshaft
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Driveshaft Repair
Q: When will the knocking or clunking noise occur?
A:
It occurs when operating the vehicle in high gear or coasting in neutral at 16 km/h (10 mph).
By Bob
GM Specialist
29/10/2022Q: How to remove the Propeller Shaft- Front?
A:
You need to accurately reference mark the propeller shaft, remove the front propeller shaft bolts and yoke clamp from the front drive axle, and remove the propeller shaft from the transfer case.
By Bob
GM Specialist
29/10/2022Q: When will the squeaking sound occur?
A:
It occurs when driving the vehicle at various speeds.
By Bob
GM Specialist
29/10/2022Q: When will the scraping noise occur?
A:
It occurs when driving the vehicle at various speeds.
By Bob
GM Specialist
29/10/2022Q: How to install the Propeller Shaft-One Piece?
A:
You need to slide the propeller shaft into the transmission, lubricate the slip joint, install the yoke to the pinion flange, next align the reference marks on the pinion flange and the propeller shaft rear yoke, install the retainers and the rear pinion flange bolts into the pinion flange.
By Bob
GM Specialist
29/10/2022Q: What should be known about the center bearing in the installation?
A:
The center bearing must be aligned to prevent damage to the propeller shaft assembly. When bolting the center bearing in place, be sure to keep the center perpendicular (89-91 degrees) to the propeller shaft.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the center-bearing support bolts and nuts?
A:
The recommended torque is 70 Nm (50 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the front propeller shaft yoke clamp bolts?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: When will the shudder occur?
A:
When the vehicle is accelerating at low speed, a shudder occurs.
By Bob
GM Specialist
29/10/2022Q: When will the ping, snap, or click noise occur?
A:
It's usually heard on the initial load after the transmission is in gear, either in forward or reverse.
By Bob
GM Specialist
29/10/2022See more FAQs (5)