FAQ for Differential Repair
Q: What is the recommended torque for the rear axle fill plug?
A:
The recommended torque is 33 Nm (24 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the rear axle housing cover bolts?
A:
The recommended torque is 39 Nm (29 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: How to remove the Lubricant-Rear Drive Axle?
A:
You need to remove the rear axle fill plug, remove the rear axle housing cover and the rear axle housing cover gasket, next drain the lubricant into a suitable container, then inspect the bottom of the rear axle housing for excessive metal particle accumulation.
By BobGM Specialist
01/11/2022 Q: What should the lubricant level be?
A:
The lubricant level should be between 0-10 mm (0-0.4 inch) below the fill plug opening.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the fill plug?
A:
The recommended torque is 33 Nm (24 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What should be cared about when removing the Rear Axle Housing?
A:
You should remember not to remove the propeller shaft from the transmission or transfer case.
By BobGM Specialist
01/11/2022 Q: Can you reuse the drive pinion yoke oil seal?
A:
No, you should install the new drive pinion yoke oil seal.
By BobGM Specialist
01/11/2022 Q: What should the specific oil level be?
A:
The specific oil level should be between 0-13 mm (0-0.5 inch) below the fill plug opening.
By BobGM Specialist
01/11/2022 Q: How to remove the Lubricant-Front Drive Axle?
A:
You need to remove the front differential carrier shield, remove the fill plug and the washer, remove the drain plug and the washer, then drain the fluid from the front axle differential.
By BobGM Specialist
01/11/2022 See more FAQs (4)