82 products about 1991 Nissan D21 A/C & Heating found
Product Specifications- Notes: 4 Cylinder, 1990-97; Pick-Up, Pathfinder; Ka24e
- Item Dimensions: 3.6 x 2.7 x 2.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Nissan D21 Sensor Assy-Temperature
More Info Vehicle Fitment- 1991 Nissan D21 | Base, XE | 4 Cyl 2.4 L GAS
$60.03 MSRP: $82.02
You Save: $21.99 (27%)
Product Specifications- Notes: Cut to Length, 5"
- Centerline Length: 50 ft
- End 1 Inside Diameter: .625 in
- End 2 Inside Diameter: .625 in
- Material: EPDM
- OE Part Number: 8990
- UPC: 072053066319
- Weight Per Length: 11.70 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 1991 Nissan D21 Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/ NVR140S Compressor; Reman w/ Clutch
- Belt Width IN: 0.500
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.250
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: NVR140S
- Distance From Clutch To Mounting Flange: 1.796875
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24681] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24661] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 133.350
- Pulley Groove Quantity: 1; 4
- Pulley Lip Diameter: 5.250
- Pulley Outside Diameter: 5.250
- Pulley Ridge Diameter: 5.250
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Switch Included: Heat Sensor
- Terminal Type: Spade
- UPC: 096361574441
- Part Description: 1991 Nissan D21 Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Cut to Length, 12"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.3125"
- OE Part Number: 49692
- UPC: 072053133226
- Weight Per Length: 7.25 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 1991 Nissan D21 Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ NVR140S Compressor; Reman w/ Clutch
- Belt Width IN: 0.500
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: NVR140S
- Distance From Clutch To Mounting Flange: 1.40625
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24681] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24661] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 146.050
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.750
- Pulley Outside Diameter: 5.750
- Pulley Ridge Diameter: 5.750
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Switch Included: Heat Sensor
- Terminal Type: Spade
- UPC: 096361574403
- Part Description: 1991 Nissan D21 Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Inner Diameter: 0.9843 in
- Outer Diameter: 2.0472 in
- UPC: 085311062640
- Width: 0.5906 in
- Part Description: 1991 Nissan D21 Rear A C Compressor Bearing
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/Nissan FS5W71C Trans
- Type: A-1
- Part Description: 1991 Nissan D21 A/C Compressor Bearing
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 20.6"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053180664
- Part Description: 1991 Nissan D21 Hvac Heater Molded Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/ NVR140S Compressor; New w/ Clutch
- Belt Width IN: 0.500
- Belt Width MM: 12.700
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: NVR140S
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 1.40625
- Mount Distance MM: 35.560
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: New
- O-Ring A Number/Desc: [24681] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24661] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 146.050
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.750
- Pulley Outside Diameter: 5.750
- Pulley Ridge Diameter: 5.750
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Switch Included: Heat Sensor
- Terminal Type: Spade
- UPC: 096361584402
- Part Description: 1991 Nissan D21 A C Compressor With Clutch
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Pick-Up
- Other Names: Dash Control Unit
- Item Dimensions: 33.9 x 15.5 x 2.1 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 27500-01G01
- Part Description: 1991 Nissan D21 Control Assembly
More Info Vehicle Fitment- 1991 Nissan D21 | Base, E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$120.65 MSRP: $164.83
You Save: $44.18 (27%)
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 12.3"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053180763
- Part Description: 1991 Nissan D21 Hvac Heater Molded Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 7
- UPC: 038244598861
- Part Description: 1991 Nissan D21 Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ NVR140S Compressor; New w/ Clutch
- Belt Width IN: 0.500
- Belt Width MM: 12.700
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.250
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: NVR140S
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 1.796875
- Mount Distance MM: 45.720
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: New
- O-Ring A Number/Desc: [24681] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24661] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 133.350
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.250
- Pulley Outside Diameter: 5.250
- Pulley Ridge Diameter: 5.250
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Switch Included: Heat Sensor
- Terminal Type: Spade
- UPC: 096361584440
- Part Description: 1991 Nissan D21 A C Compressor With Clutch
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Pick-Up, Pathfinder; Ka24e; 4 Cylinder
- Item Dimensions: 2.4 x 16.8 x 16.2 inches
- Item Weight: 2.00 Pounds
- Replaces: 21060-86G00
- Part Description: 1991 Nissan D21 Fan-Cooling
More Info Vehicle Fitment- 1991 Nissan D21 | Base, XE | 4 Cyl 2.4 L GAS
$118.17 MSRP: $166.92
You Save: $48.75 (30%)
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 1991 Nissan D21 Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L
- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Suction Line
- Bracket: w/o Bracket
- Component Type: Suction Line
- End 1 Type: P-Nut Fitting
- End 2 Type: Female O-Ring
- Fittings Included: Included
- Gasket or Seal Included: Included
- Material: Aluminum / Rubber
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24610] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24642] / Green O-Ring
- O-Ring B Quantity: 1
- O.E. Replacement: Yes
- Refrigerant Type: R12
- Service Port: w/ Service Port
- Service Port Qty: 1
- Service Port Size: 1/4
- Service Port Type: Service Port
- Suction End Type: Female O-Ring
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- System Pressure: Low Pressure
- UPC: 096361551237
- Part Description: 1991 Nissan D21 A C Suction Line Hose Assembly
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 3/4
- End 2 Inside Diameter: 3/4
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 3
- UPC: 038244599141
- Part Description: 1991 Nissan D21 Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Core Depth Fraction: 4
- Core Depth MM: 101.600
- Core Height Fraction: 7-3/4
- Core Height MM: 196.850
- Core Width Fraction: 8
- Core Width MM: 203.200
- Depth: 4.000
- Height: 7.750
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24604] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24608] / Green O-Ring
- O-Ring B Quantity: 1
- O-Ring C Number/Desc: [24610] / Green O-Ring
- O-Ring C Quantity: 1
- Outlet Fitting Outside Diameter: No. 10
- UPC: 096361541795
- Width: 8.000
- Part Description: 1991 Nissan D21 A C Evaporator Core
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Centerline Length (in): 17.5"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053179750
- Part Description: 1991 Nissan D21 Hvac Heater Molded Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 7
- UPC: 038244598571
- Part Description: 1991 Nissan D21 Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Discharge Line
- Bracket: w/o Bracket
- Component Type: Discharge Line
- Fittings Included: Included
- Gasket or Seal Included: Included
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24661] / Green O-Ring
- O-Ring A Quantity: 2
- O.E. Replacement: Yes
- Refrigerant Type: R12, R134a
- Service Port: w/o Service Port
- Service Port Qty: 1
- Service Port Size: 3/8" - 24
- Service Port Type: Service Port
- Suction End Type: P-Nut Fitting
- Switch Included: Not Included
- Switch Service Port: w/ Switch Port
- UPC: 096361551275
- Part Description: 1991 Nissan D21 A C Discharge Line Hose Assembly
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Centerline Length (in): 7.1
- Centerline Length (mm): 180
- End 1 Inside Diameter: 0.72 in
- End 2 Inside Diameter: 0.72 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 3155
- UPC: 072053178395
- Part Description: 1991 Nissan D21 Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/o Wheel
- Cage Wheel Included: w/o Wheel
- Connector Gender: None
- Connector qty: None
- Flanged End: Yes
- Material: Metal
- Motor Dia. MM: 82.550
- Motor Diameter: 3.250
- Motor Length: 4.125
- Motor Length MM: 104.775
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: Connector Not Included
- O.E. Replacement: Yes
- Rotation: CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.6875
- Shaft Shape: Round
- Shaft Type: Round
- Style: Flanged
- Terminal Type: 2 Lead Wires
- UPC: 096361354210
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1991 Nissan D21 Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Centerline Length (in): 12.9"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053179729
- Part Description: 1991 Nissan D21 Hvac Heater Molded Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
Product Specifications- Color: Gray
- Comp Open/Closed: Open
- Connector Gender: Female
- Connector Shape: Rectangle
- Fitting Gender: Male
- Fitting Thread Size: 3/8 in. x 24
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mounted
- Number of Terminals: 2
- Operate Psi Low Off: 34
- Operate Psi Low On: 35
- Style: Binary
- UPC: 096361209862
- Part Description: 1991 Nissan D21 A C Compressor Cut Out Switch
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Color: Brass
- Refrigerant Type: R134A
- Super Heat: 8.0
- UPC: 096361386372
- Part Description: 1991 Nissan D21 A C Expansion Valve
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings
- Style: O-Ring & Gasket Kit
- UPC: 096361267473
- Part Description: 1991 Nissan D21 A C System O Ring And Gasket Kit
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Notes: Caps and Valve Core Seal Kit; w/ R12 or R134a Retrofit System
- Cap Color: Red, Blue, Black
- Cap Inside Diameter: Specific
- Cap Material: Plastic
- Material: Aluminum
- Refrigerant Type: R12, R134a
- Style: Cap & Valve Kit
- UPC: 096361267770
- Valve Core Material: Specific
- Part Description: 1991 Nissan D21 A C System Valve Core And Cap Kit
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Body Diameter: 2.500
- Body Length: 8.000
- Bracket: w/o Bracket
- Connector B Type: Male Insert O-Ring
- Connector Type: Male Insert O-Ring
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 63.500
- Fuse Plug: No
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Male
- Inlet Dia. Fraction: 11/16
- Inlet Filter Fitting Thread Diameter: 0.709
- Inlet Filter Fitting Type: Male
- Inlet Fitting Diameter: 0.709
- Inlet Fitting Type: Male Insert O-Ring
- Length MM: 203.200
- Material: Steel
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- New or Reman: New
- O-Ring A Number/Desc: [24606] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24608] / Green O-Ring
- O-Ring B Quantity: 2
- O-Ring C Number/Desc: [24606] / Green O-Ring
- O-Ring C Quantity: 2
- Outlet Fitting Type: Male Insert O-Ring
- Outlet IN: 0.375
- Overall Depth IN: 8.000
- Overall Depth MM: 203.200
- P. R. V.: No
- Service Port: w/o Service Port
- Sight Glass: Yes
- Stud: No
- Style: Steel Filter Drier
- Switch Port: w/ Switch Port
- Switch Port Dia. IN: 0.250
- Switch Port Dia.MM: 6.350
- UPC: 096361334151
- Part Description: 1991 Nissan D21 A C Receiver Drier
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 2 Inside Diameter: 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 038244597512
- Part Description: 1991 Nissan D21 Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1991 Nissan D21 | All Trims | 4 Cyl 2.4L
- 1991 Nissan D21 | All Trims | 6 Cyl 3.0L