81 products about 1988 Nissan Pathfinder A/C & Heating found
Product Specifications- Notes: 6 Cylinder, Manual Trans
- Other Names: Blade, Fan Blade
- Item Dimensions: 20.3 x 16.5 x 11.2 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Nissan Pathfinder Fan-Cooling
More Info Vehicle Fitment- 1988 Nissan Pathfinder | SE, XE | 6 Cyl 3.0 L GAS
$91.20 MSRP: $124.60
You Save: $33.40 (27%)
Product Specifications- Notes: Cut to Length, 20";Cut to Length, 9"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.3125"
- OE Part Number: 49692
- UPC: 072053133226
- Weight Per Length: 7.25 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 1988 Nissan Pathfinder Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 4 Cyl 2.4L
- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: w/ NVR140S Compressor; Reman w/ Clutch
- Belt Width IN: 0.500
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: NVR140S
- Distance From Clutch To Mounting Flange: 1.40625
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24681] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24661] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 146.050
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.750
- Pulley Outside Diameter: 5.750
- Pulley Ridge Diameter: 5.750
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Switch Included: Heat Sensor
- Terminal Type: Spade
- UPC: 096361574403
- Part Description: 1988 Nissan Pathfinder Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Notes: Pick-Up, Pathfinder; From 11/85
- Other Names: Dash Control Unit
- Item Dimensions: 33.9 x 15.5 x 2.1 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 27500-01G01
- Part Description: 1988 Nissan Pathfinder Control Assembly
More Info Vehicle Fitment- 1988 Nissan Pathfinder | E, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
$120.65 MSRP: $164.83
You Save: $44.18 (27%)
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 17.8"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053180688
- Part Description: 1988 Nissan Pathfinder Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/Nissan FS5W71C Trans
- Type: A-1
- Part Description: 1988 Nissan Pathfinder A/C Compressor Bearing
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 12
- UPC: 038244598830
- Part Description: 1988 Nissan Pathfinder Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/ NVR140S Compressor; New w/ Clutch
- Belt Width IN: 0.500
- Belt Width MM: 12.700
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: NVR140S
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 1.40625
- Mount Distance MM: 35.560
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: New
- O-Ring A Number/Desc: [24681] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24661] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: V-Belt
- Pulley Diameter MM: 146.050
- Pulley Groove Quantity: 1
- Pulley Lip Diameter: 5.750
- Pulley Outside Diameter: 5.750
- Pulley Ridge Diameter: 5.750
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Switch Included: Heat Sensor
- Terminal Type: Spade
- UPC: 096361584402
- Part Description: 1988 Nissan Pathfinder A C Compressor With Clutch
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 1988 Nissan Pathfinder Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Core Depth Fraction: 4
- Core Depth MM: 101.600
- Core Height Fraction: 7-3/4
- Core Height MM: 196.850
- Core Width Fraction: 8
- Core Width MM: 203.200
- Depth: 4.000
- Height: 7.750
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24604] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24608] / Green O-Ring
- O-Ring B Quantity: 1
- O-Ring C Number/Desc: [24610] / Green O-Ring
- O-Ring C Quantity: 1
- Outlet Fitting Outside Diameter: No. 10
- UPC: 096361541795
- Width: 8.000
- Part Description: 1988 Nissan Pathfinder A C Evaporator Core
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8
- UPC: 038244598625
- Part Description: 1988 Nissan Pathfinder Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Centerline Length (in): 17.5"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053179750
- Part Description: 1988 Nissan Pathfinder Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: w/o Wheel
- Cage Wheel Included: w/o Wheel
- Connector Gender: None
- Connector qty: None
- Flanged End: Yes
- Material: Metal
- Motor Dia. MM: 82.550
- Motor Diameter: 3.250
- Motor Length: 4.125
- Motor Length MM: 104.775
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: Connector Not Included
- O.E. Replacement: Yes
- Rotation: CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.6875
- Shaft Shape: Round
- Shaft Type: Round
- Style: Flanged
- Terminal Type: 2 Lead Wires
- UPC: 096361354210
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1988 Nissan Pathfinder Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 7
- UPC: 038244598571
- Part Description: 1988 Nissan Pathfinder Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Color: Gray
- Comp Open/Closed: Open
- Connector Gender: Female
- Connector Shape: Rectangle
- Fitting Gender: Male
- Fitting Thread Size: 3/8 in. x 24
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mounted
- Number of Terminals: 2
- Operate Psi Low Off: 34
- Operate Psi Low On: 35
- Style: Binary
- UPC: 096361209862
- Part Description: 1988 Nissan Pathfinder A C Compressor Cut Out Switch
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Centerline Length (in): 6.5
- Centerline Length (mm): 165
- End 1 Inside Diameter: 0.28 in
- End 2 Inside Diameter: 0.28 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 1945
- UPC: 072053178241
- Part Description: 1988 Nissan Pathfinder Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 9/32
- End 2 Inside Diameter: 9/32
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 5
- UPC: 038244597505
- Part Description: 1988 Nissan Pathfinder Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Color: Brass
- Refrigerant Type: R134A
- Super Heat: 8.0
- UPC: 096361386372
- Part Description: 1988 Nissan Pathfinder A C Expansion Valve
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings
- Style: O-Ring & Gasket Kit
- UPC: 096361267473
- Part Description: 1988 Nissan Pathfinder A C System O Ring And Gasket Kit
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Notes: Caps and Valve Core Seal Kit; w/ R12 or R134a Retrofit System
- Cap Color: Red, Blue, Black
- Cap Inside Diameter: Specific
- Cap Material: Plastic
- Material: Aluminum
- Refrigerant Type: R12, R134a
- Style: Cap & Valve Kit
- UPC: 096361267770
- Valve Core Material: Specific
- Part Description: 1988 Nissan Pathfinder A C System Valve Core And Cap Kit
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Body Diameter: 2.500
- Body Length: 8.000
- Bracket: w/o Bracket
- Connector B Type: Male Insert O-Ring
- Connector Type: Male Insert O-Ring
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 63.500
- Fuse Plug: No
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Male
- Inlet Dia. Fraction: 11/16
- Inlet Filter Fitting Thread Diameter: 0.709
- Inlet Filter Fitting Type: Male
- Inlet Fitting Diameter: 0.709
- Inlet Fitting Type: Male Insert O-Ring
- Length MM: 203.200
- Material: Steel
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- New or Reman: New
- O-Ring A Number/Desc: [24606] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24608] / Green O-Ring
- O-Ring B Quantity: 2
- O-Ring C Number/Desc: [24606] / Green O-Ring
- O-Ring C Quantity: 2
- Outlet Fitting Type: Male Insert O-Ring
- Outlet IN: 0.375
- Overall Depth IN: 8.000
- Overall Depth MM: 203.200
- P. R. V.: No
- Service Port: w/o Service Port
- Sight Glass: Yes
- Stud: No
- Style: Steel Filter Drier
- Switch Port: w/ Switch Port
- Switch Port Dia. IN: 0.250
- Switch Port Dia.MM: 6.350
- UPC: 096361334151
- Part Description: 1988 Nissan Pathfinder A C Receiver Drier
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 2 Inside Diameter: 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 6 1/4
- UPC: 038244597550
- Part Description: 1988 Nissan Pathfinder Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 4 Cyl 2.4L
- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 11.9"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- UPC: 072053191400
- Part Description: 1988 Nissan Pathfinder Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Centerline Length (in): 9.8
- Centerline Length (mm): 249
- End 1 Inside Diameter: 0.62 in
- End 2 Inside Diameter: 0.62 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 31352
- UPC: 072053179491
- Part Description: 1988 Nissan Pathfinder Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 10.8"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053179521
- Part Description: 1988 Nissan Pathfinder Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | 6 Cyl 3.0L
Product Specifications- Connector Gender: Female
- Connector Shape: Rectangle
- Meets / Exceeds OEM: Yes
- Number of Terminals: 5
- Speed: Fixed # 4
- Terminal Type: Spade
- UPC: 096361201224
- Part Description: 1988 Nissan Pathfinder Hvac Blower Motor Resistor
More Info Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Notes: 6 Cylinder
- Other Names: Pulley
- Item Dimensions: 4.0 x 3.3 x 1.8 inches
- Item Weight: 0.70 Pounds
- Replaces: 11925-V5002, 11925-V5004, 11925-V5001, 11925-V5003
- Part Description: 1988 Nissan Pathfinder PULLEY IDLER
More Info Vehicle Fitment- 1988 Nissan Pathfinder | SE, XE | 6 Cyl 3.0 L GAS
Product Specifications- Other Names: Blower Motor, Fan Motor
- Item Dimensions: 8.7 x 8.6 x 8.4 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 27220-01G00, 27220-01G02, 27220-01G01
- Part Description: 1988 Nissan Pathfinder Fan W/MOTOR
More Info Vehicle Fitment- 1988 Nissan Pathfinder | E, LE, SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
Product Specifications- UPC: 671607161335
- Part Description: 1988 Nissan Pathfinder A/C Accumulator
Vehicle Fitment- 1988 Nissan Pathfinder | All Trims | All Engines
Product Specifications- Notes: 6 Cylinder
- Item Dimensions: 10.5 x 8.6 x 8.6 inches
- Item Weight: 18.40 Pounds
- Replaces: 92600-09G00, 92600-09G02, 92600-09G01, 92600-09G05
- Part Description: 1988 Nissan Pathfinder Compressor Cooler
More Info Vehicle Fitment- 1988 Nissan Pathfinder | SE, XE | 6 Cyl 3.0 L GAS