< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Yukon Pipe Kit, Steering Gear (Right)
PartNumber: 19167838
Product Specifications- Location: Driver Side
- Other Names: Pipe Kit
- Item Dimensions: 6.1 x 5.8 x 20.4 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Pipe Kit, Steering Gear (Right)
Vehicle Fitment- 2010 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX
$105.64 MSRP:$192.98You Save: $87.34 (46%)
OEM (Genuine) 2010 GMC Yukon Pressure Hose
PartNumber: 25858603
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Power Steering Pressure Hose, Pressure Hose
- Item Dimensions: 7.5 x 3.0 x 14.6 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Pressure Hose
Vehicle Fitment- 2010 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$90.63 MSRP:$150.04You Save: $59.41 (40%)
OEM (Genuine) 2010 GMC Yukon Return Hose
PartNumber: 15812565
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Power Steering Return Hose, Return Hose
- Item Dimensions: 9.4 x 29.3 x 0.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Return Hose
Vehicle Fitment- 2010 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$55.80 MSRP:$92.39You Save: $36.59 (40%)
OEM (Genuine) 2010 GMC Yukon Pipe Kit
PartNumber: 19167837
Product Specifications- Location: Passenger Side
- Other Names: Pipe Kit
- Item Dimensions: 3.3 x 2.8 x 19.5 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Pipe Kit
Vehicle Fitment- 2010 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX
Gates® Power Steering Return Line Hose Assembly Cooler To Reservoir for 2010 GMC Yukon
PartNumber: 352281Product Specifications- Notes: Cut to Length, 20"; Cut to fit
- End 1 Diameter: 0.375"
- End 1 Type: I.D. Hose
- Length: 37"
- UPC: 770075666301
- Part Description: 2010 GMC Yukon Power Steering Return Line Hose Assembly Cooler To Reservoir
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
Gates® Power Steering Pressure Line Hose Assembly for 2010 GMC Yukon
PartNumber: 352182Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Male Quick Connect
- End 2 Diameter (mm): 16 mm
- End 2 Type: Male O-Ring
- Length: 36"
- Switch Port: Without Switch Port
- UPC: 770075609070
- Part Description: 2010 GMC Yukon Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
Gates® Power Steering Return Line Hose Assembly Gear To Cooler for 2010 GMC Yukon
PartNumber: 352183Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Male Quick Connect
- End 2 Type: I.D. Hose
- Length: 28"
- UPC: 770075547501
- Part Description: 2010 GMC Yukon Power Steering Return Line Hose Assembly Gear To Cooler
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
FAQ for Power Steering Hose Repair
Q: What should I notice about Power Steering Hose Disconnected?
A:
You do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, you plug or cap all openings of components.
By Bob
GM Specialist
02/11/2022Q: How to install the Power Steering Gear Inlet Pipe/Hose?
A:
You can route the power steering gear inlet hose in the same position it was in prior to removal, install the power steering gear inlet hose, clean any excess fluid from the vehicle and remove the drain pans, fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What is the preliminary procedure for the Power Steering Gear Inlet Pipe/Hose removal?
A:
You can remove the engine shield.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Power Steering Gear Inlet Hose fitting?
A:
The recommended torque is 32 Nm (24 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Power Steering Gear inlet hose retaining plate bolt?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
02/11/2022Q: How to remove the Power Steering Gear Inlet Pipe/Hose?
A:
You can install drain pans under the vehicle, and remove the power steering gear inlet hose.
By Bob
GM Specialist
02/11/2022Q: How to remove the Power Steering Gear Outlet Pipe/Hose?
A:
You can place drain pans under the vehicle as needed, disconnect the power steering fluid cooler hose clamp and hose, and remove the power steering gear outlet pipe.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the fittings?
A:
The recommended torque is 32 Nm (24 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to install the Power Steering Gear Outlet Pipe/Hose?
A:
You can install the power steering gear outlet pipe, connect the power steering fluid cooler hose, clean any excess fluid from the vehicle and remove the drain pans, fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What is the preliminary procedure for the Power Steering Gear Outlet Pipe/Hose (Gas Without Hydroboost) removal?
A:
You can remove the engine shield.
By Bob
GM Specialist
02/11/2022See more FAQs (5)