< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Steering Systems
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Yukon Intermed Shaft
PartNumber: 84370714
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Coupling, Intermed Shaft, Lower Shaft, Upper Shaft
- Item Dimensions: 25.2 x 6.3 x 6.2 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 23167615, 25809424, 23381952
- Replaced by: 85104192
- Part Description: 2010 GMC Yukon Intermed Shaft
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$101.75 MSRP:$168.42You Save: $66.67 (40%)
Dorman® Upper Intermediate Steering Shaft for 2010 GMC Yukon
PartNumber: 425-183Product Specifications- Finish: Black/Epoxy E-coat
- Installation Instructions Included: No
- Material: Steel
- Mounting Hardware Included: No
- OE Part Number: 25809424, 15775842, 23167615, 23381952
- Shaft Diameter: 3.25"
- Shaft Length: 9.75"
- Spline Count: 0
- UPC: 019495432685
- Part Description: 2010 GMC Yukon Upper Intermediate Steering Shaft
Vehicle Fitment- 2010 GMC Yukon | All Trims | All Engines
$62.24
OEM (Genuine) 2010 GMC Yukon Steering Gear Coupling Shaft Assembly
PartNumber: 25979051
Product Specifications- Other Names: Coupling, Coupling Shaft, Lower Shaft
- Item Dimensions: 6.1 x 6.0 x 25.6 inches
- Item Weight: 4.00 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420043
- Part Description: 2010 GMC Yukon Steering Gear Coupling Shaft Assembly
Vehicle Fitment- 2010 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$497.73 MSRP:$823.81You Save: $326.08 (40%)
OEM (Genuine) 2010 GMC Yukon Steering Gear Coupling Shaft Assembly
PartNumber: 25979050
Product Specifications- Other Names: Coupling Shaft, Lower Shaft
- Item Dimensions: 25.8 x 5.8 x 5.8 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420042
- Part Description: 2010 GMC Yukon Steering Gear Coupling Shaft Assembly
Vehicle Fitment- 2010 GMC Yukon | Denali Hybrid, Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$268.65 MSRP:$426.55You Save: $157.90 (38%)
FAQ for Steering Shaft Repair
Q: What is the preliminary procedure for the Steering Shaft Lower Bearing removal?
A:
You can remove the steering wheel position sensor.
By Bob
GM Specialist
02/11/2022Q: How to remove the Steering Shaft?
A:
You can set the front wheels in the straight-ahead position, install the J 42640-anti-rotation pin in the steering column lower access hole, remove the engine shield, mark the relationships of the steering shaft coupling, the upper intermediate steering shaft, and the power steering gear, remove the steering shaft coupling bolt at the steering gear, the steering shaft coupling nut and bolt, the steering shaft coupling from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to remove the Steering Shaft Upper Bearing?
A:
You can remove the steering column, the inflatable restraint steering wheel module coil, the turn signal multifunction switch, the ignition lock cylinder case, the tilt spring, the automatic transmission control, the steering shaft lock plate retaining ring, the turn signal switch cancel cam position plate, the turn signal switch cancel cam, the steering shaft upper bearing spring, the steering shaft upper bearing inner race seat, the steering shaft upper bearing inner race, the 2 pivot pins, the steering column tilt head, anti-rotation pin J 42640, the tilt lever, the steering shaft upper bearing.
By Bob
GM Specialist
02/11/2022Q: How to install the Steering Shaft?
A:
You can install the steering shaft coupling to the vehicle, the steering shaft coupling nut and bolt, the steering shaft coupling bolt at the steering gear, and the engine shield, and remove the J 42640-anti-rotation pin from the steering column lower access hole.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the upper intermediate steering shaft?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the steering shaft coupling bolt?
A:
The recommended torque is 47 Nm (35 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to install the Steering Shaft Upper Bearing?
A:
You can install the steering column, the inflatable restraint steering wheel module coil, the turn signal multifunction switch, the ignition lock cylinder case, the tilt spring, the automatic transmission control, the steering shaft lock plate retaining ring, the turn signal switch cancel cam position plate, the turn signal switch cancel cam, the steering shaft upper bearing spring, the steering shaft upper bearing inner race seat, the steering shaft upper bearing inner race, the 2 pivot pins, the steering column tilt head, anti-rotation pin J 42640, the tilt lever, the steering shaft upper bearing.
By Bob
GM Specialist
02/11/2022See more FAQs (2)