Part Description: 2009 Chevrolet Colorado Balancer Asm-Crankshaft
More Info
Vehicle Fitment
2009 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
FAQ for Harmonic Balancer Repair
Q: What is the crankshaft balancer installation procedure?
A:
Install the J 41665 and the threaded rod from the J 41478 to the crankshaft balancer and install balancer. Install the used crankshaft balancer bolt and tighten it to 330 Nm. Remove the used crankshaft balancer bolt and install a new one.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the drive belt idler pulley installation procedure?
A:
Place the drive belt Idler Pulley to the generator bracket and tighten the idler to the pulley bolt. Next, tighten the drive belt idler pulley bolt to 50 Nm. Finally, install the accessory drive belt.
Q: What is the camshaft timing chain and sprocket service procedure?
A:
First, install the key into the crankshaft keyway, install the crankshaft sprocket and rotate the crankshaft sprocket until the alignment mark is in the 12 o'clock position. Install the Timing Chain tensioner/bolts and tighten the bolts to 25 Nm.
Q: What is the drive belt tensioner removal procedure?
A:
Remove the accessory drive belt, the drive Belt Tensioner bolts, and the drive belt tensioner.