Other Names: Belt Tensioner, Serpentine Tensioner, Tensioner
Item Dimensions: 9.0 x 5.0 x 2.9 inches
Item Weight: 2.00 Pounds
Fitment Type: Direct Replacement
Replaces: 24576885
Replaced by: 19431999
Part Description: 2009 Chevrolet Colorado Serpentine Tensioner
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Other Names: Chain Guide, Shoe, Tensioner, Timing Chain Guide
Item Dimensions: 9.9 x 2.5 x 1.3 inches
Item Weight: 0.60 Pounds
Fitment Type: Direct Replacement
Part Description: 2009 Chevrolet Colorado Timing Chain Guide
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Part Description: 2009 Chevrolet Colorado Tensioner
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$59.31MSRP: $98.23
You Save: $38.92 (40%)
FAQ for Belt Tensioner Repair
Q: What is the drive belt tensioner removal procedure?
A:
Remove the accessory drive belt, the drive belt tensioner bolts, and the drive belt tensioner.
By Bob
GM Specialist
29/10/2022
Q: What is the drive belt tensioner installation procedure?
A:
Install and tighten the drive belt tensioner bolts. Tighten the bolts to 50 Nm and install the accessory drive belt.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the drive belt idler pulley installation procedure?
A:
Place the drive belt Idler Pulley to the generator bracket and tighten the idler to the pulley bolt. Next, tighten the drive belt idler pulley bolt to 50 Nm. Finally, install the accessory drive belt.
Q: What is the camshaft timing chain and sprocket service procedure?
A:
First, install the key into the crankshaft keyway, install the crankshaft sprocket and rotate the crankshaft sprocket until the alignment mark is in the 12 o'clock position. Install the Timing Chain tensioner/bolts and tighten the bolts to 25 Nm.
Q: What is the camshaft replacement installation procedure?
A:
Install the Camshaft retainer and bolts. Next, tighten the camshaft retainer bolts and compress the timing chain tensioner guide. Install the timing chain tensioner and tighten it to 25 Nm. Next, install the camshaft sprocket and the timing chain. Install a new camshaft sprocket bolt and tighten the camshaft bolt to 75 Nm.