2009 Cadillac SRX Sway Bar Link

You can raise the vehicle, remove the rear tire and wheel assembly, pull down on the intermediate park brake cable, disconnect the intermediate park brake cable, depress the rear brake cable retainer, remove the rear park brake cable, disconnect the park brake cable, remove the Parking Brake Cable bracket mounting bolts and remove the parking brake cable bracket.

You can install the sensor to the vehicle, bottom out the captured stud in the keyhole, rotate the sensor and bracket, continue to rotate the sensor bracket, install the rear Ride Height Sensor retaining nut, connect the ride sensor link to the upper control arm ball stud, connect the ride sensor harness connector, install the tire and wheel and lower the vehicle.

You can raise the vehicle, remove the tire and wheel, remove the wheel bearing/hub, remove the outer tie rod to the Steering Knuckle retaining nut, disconnect the tie rod from the steering knuckle, remove the brake hose bracket to the steering knuckle retaining bolts, remove the upper control arm ball stud to steering knuckle retaining nut, separate the upper control arm ball stud from the steering knuckle, remove the lower control arm ball stud to steering knuckle retaining nut, separate the lower control arm ball stud from the steering knuckle and remove the steering knuckle.