< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2009 Cadillac SRX Knuckle
PartNumber: 25998394
Product Specifications- Notes: 2WD; AWD; Srx; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 10.1 x 7.4 x 24.3 inches
- Item Weight: 20.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18048937
- Part Description: 2009 Cadillac SRX Knuckle
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$116.28 MSRP:$180.37You Save: $64.09 (36%)
OEM (Genuine) 2009 Cadillac SRX Knuckle
PartNumber: 88952000
Product Specifications- Notes: Srx; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 11.8 x 11.3 x 9.3 inches
- Item Weight: 11.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Knuckle
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$153.50 MSRP:$254.07You Save: $100.57 (40%)OEM (Genuine) 2009 Cadillac SRX Knuckle
PartNumber: 25998393Product Specifications- Notes: 2WD; AWD; Srx; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 23.6 x 10.5 x 5.0 inches
- Item Weight: 19.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18048936
- Part Description: 2009 Cadillac SRX Knuckle
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$113.08 MSRP:$180.37You Save: $67.29 (38%)OEM (Genuine) 2009 Cadillac SRX Knuckle
PartNumber: 88951999Product Specifications- Notes: Srx; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 14.5 x 10.6 x 6.7 inches
- Item Weight: 8.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Knuckle
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Steering Knuckle Repair
Q: How do you replace the steering knuckle?
A:
You can raise the vehicle, remove the tire and wheel, remove the wheel bearing/hub, remove the outer tie rod to the steering knuckle retaining nut, disconnect the tie rod from the steering knuckle, remove the brake hose bracket to the steering knuckle retaining bolts, remove the upper control arm ball stud to steering knuckle retaining nut, separate the upper control arm ball stud from the steering knuckle, remove the lower control arm ball stud to steering knuckle retaining nut, separate the lower control arm ball stud from the steering knuckle and remove the steering knuckle.
By Bob
GM Specialist
02/11/2022Q: What tool can you use to separate the ball stud from the knuckle?
A:
You can use J 43631.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the steering knuckle?
A:
You can install the steering knuckle, install a new lower control arm ball stud retaining nut, install the upper control arm ball stud to the steering knuckle, install a new upper control arm ball stud retaining nut, install the brake hose bracket to the steering knuckle retaining bolts, connect the outer tie rod to the steering knuckle, install the outer tie rod retaining nut, install the wheel bearing/hub, install the tire and wheel and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when you install the wheel bearing/hub mounting bolts?
A:
You can tighten the bolts to 125 Nm (92 lb-ft).
By Bob
GM Specialist
02/11/2022