Part Description: 2007 GMC Sierra 3500 HD Balancer Asm-Crankshaft
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
FAQ for Harmonic Balancer Repair
Q: How to install the crankshaft balancer?
A:
You can install the J 41665 and the threaded rod, the USED crankshaft balancer bolt, the J 41665, the new crankshaft balancer bolt, the starter motor, the cooling fan and shroud, and the A/C drive belt.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the USED bolt?
A:
The recommended torque is 330 N.m (240 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How to remove the crankshaft balancer?
A:
You can remove the air conditioning (A/C) drive belt, the cooling fan and shroud, the starter motor, the crankshaft balancer bolt, the crankshaft balancer, and the J 41816 and the J 41816-2.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the drive belt idler pulley?
A:
You should place the drive belt Idler Pulley to the generator bracket and tighten the idler pulley bolt finger tight, tighten the drive belt idler pulley bolt and then install the accessory drive belt.
Q: What is the removal procedure for the timing chain and sprocket?
A:
The procedure is to remove the oil pump, the starter motor, the CMP actuator solenoid valve, the CMP actuator and Timing Chain, the timing chain tension bolts, the crankshaft sprocket, and the crankshaft sprocket key.
Q: How to remove the drive belt?
A:
You can remove the air cleaner outlet duct, the Drive Belt, and the breaker bar and socket from the drive belt tensioner bolt.