Part Description: 2007 GMC Sierra 3500 HD No Slack Light Duty Idler Tensioner Pulley
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.6L
$15.70
FAQ for Idler Pulley Repair
Q: How to install the drive belt idler pulley?
A:
You should place the drive belt idler pulley to the generator bracket and tighten the idler pulley bolt finger tight, tighten the drive belt idler pulley bolt and then install the accessory drive belt.
By Bob
GM Specialist
01/11/2022
Q: How to remove the drive belt idler pulley?
A:
You should remove the accessory drive belt and loosen the drive belt idler pulley bolt and remove the idler pulley.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the drive belt idler pulley bolt?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the timing chain and sprocket?
A:
The procedure is to remove the oil pump, the starter motor, the CMP actuator solenoid valve, the CMP actuator and Timing Chain, the timing chain tension bolts, the crankshaft sprocket, and the crankshaft sprocket key.
Q: How to remove the drive belt?
A:
You can remove the air cleaner outlet duct, the Drive Belt, and the breaker bar and socket from the drive belt tensioner bolt.
Q: How to remove the belt tensioner?
A:
You can remove the air conditioning (A/C) drive belt, the A/C drive Belt Tensioner bolts, and the A/C drive belt tensioner.