After installing the condenser, the mounting bolts, the condenser tube clip bolt, and the radiator and condenser assembly, you can remove the cap and install a new seal washer. After installing the evaporator inlet tube and the bolt, you can remove the cap and install a new sealing washer, the A/C discharge hose, and the nut. Then you need to raise the vehicle, install the radiator outlet hose, connect the radiator outlet hose, reposition the hose clamp and lower the vehicle. After that, you can connect the radiator outlet hose, reposition the hose clamp, install the cooling fans, fill the cooling system, evacuate and recharge the A/C system and inspect the transmission fluid level.
By BobGM Specialist
01/11/2022