< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
Gates® Power Steering Pressure Line Hose Assembly for 2005 Buick Century
PartNumber: 371050Product Specifications- End 1 Diameter: 16 mm
- End 1 Type: Male O-Ring
- End 2 Diameter: 18 mm
- End 2 Diameter (mm): 18 mm
- End 2 Type: Male O-Ring
- Length: 72"
- Switch Port: Without Switch Port
- UPC: 072053608649
- Part Description: 2005 Buick Century Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$31.56
OEM (Genuine) 2005 Buick Century Pipe Kit, Steering Gear(Short)
PartNumber: 26065126
Product Specifications- Notes: W/O Variable Effort; All Models; Left; W/O Variable Steering
- Location: Driver Side
- Other Names: Fluid Pipe, Line Kit, Pipe, Pipe Kit, Tube
- Item Dimensions: 3.0 x 10.5 x 1.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Pipe Kit, Steering Gear(Short)
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$40.47 MSRP:$66.55You Save: $26.08 (40%)
OEM (Genuine) 2005 Buick Century Hose Asm-P/S Gear Inlet
PartNumber: 21993842
Product Specifications- Notes: W/O Variable; All Models; 3.1l
- Other Names: Power Steering Pressure Hose, Pressure Hose
- Item Dimensions: 4.1 x 19.8 x 19.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26083979, 26070141
- Part Description: 2005 Buick Century Hose Asm-P/S Gear Inlet
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$46.74 MSRP:$76.84You Save: $30.10 (40%)
Gates® Power Steering Return Line Hose Assembly From Gear for 2005 Buick Century
PartNumber: 365426Product Specifications- End 1 Diameter: 16 mm
- End 1 Type: Male O-Ring
- Length: 82.5"
- UPC: 072053694574
- Part Description: 2005 Buick Century Power Steering Return Line Hose Assembly From Gear
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
OEM (Genuine) 2005 Buick Century Pipe Kit, Steering Gear(Long)
PartNumber: 26055484
Product Specifications- Notes: W/O Variable Effort; All Models; Right; W/O Variable Steering
- Location: Passenger Side
- Other Names: Fluid Pipe, Line Kit, Pipe, Pipe Kit, Tube
- Item Dimensions: 2.8 x 2.6 x 17.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Pipe Kit, Steering Gear(Long)
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
Gates® Power Steering Return Line Hose Assembly Pipe To Reservoir for 2005 Buick Century
PartNumber: 352685Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: I.D. Molded Return Hose
- Length: 9.5"
- UPC: 770075730101
- Part Description: 2005 Buick Century Power Steering Return Line Hose Assembly Pipe To Reservoir
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
OEM (Genuine) 2005 Buick Century Pipe Asm-P/S Pump Inlet
PartNumber: 26077754
Product Specifications- Notes: All Models; 3.1l
- Item Dimensions: 21.3 x 5.2 x 1.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Pipe Asm-P/S Pump Inlet
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
OEM (Genuine) 2005 Buick Century Pipe Asm-P/S Fluid Cooling
PartNumber: 10329337
Product Specifications- Notes: All
- Item Dimensions: 25.1 x 2.4 x 12.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26079269, 26077221
- Part Description: 2005 Buick Century Pipe Asm-P/S Fluid Cooling
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
FAQ for Power Steering Hose Repair
Q: What is the recommended torque for the cooler pipe/hose to the steering gear?
A:
The recommended torque is 27 Nm (20 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Cooler Pipe/Hose?
A:
You need to remove the return hose from the cooler pipe/hose, the cooler pipe/hose retaining bolt from the frame, the cooler pipe/hose from the retaining clips on the frame, the cooler pipe/hose from the clamps on the steering gear, the wiring harness clip from the cooler pipe/hose, the cooler pipe/hose from the steering gear and the cooler pipe/hose from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Pressure Pipe/Hose (3.1L)?
A:
You need to place a drain pan under the vehicle and remove the coolant reservoir to allow access to the power steering pressure hose, the pressure hose from the power steering pump, the pressure hose from the retaining bracket on the engine, the pressure hose from the gear, the power steering pressure hose from the clamps on the power steering gear and the power steering pressure hose from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you install the Power Steering Pressure Pipe/Hose (3.1L)?
A:
You need to install the power steering pressure hose to the vehicle, the power steering pressure hose to the clamps on the power steering gear, the power steering pressure hose to the power steering gear, the power steering pressure hose to the retaining bracket on the engine, the power steering pressure hose to the power steering pump and the coolant reservoir, fill the power steering system with power steering fluid, bleed the power steering system, inspect the power steering system for leaks and remove the drain pan from under the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you install the Power Steering Cooler Pipe/Hose?
A:
You need to install the cooler pipe/hose to the vehicle, the wiring harness clip to the cooler pipe/hose, the cooler pipe/hose to the clips on the steering gear, the cooler pipe/hose to the retaining clip on the frame, the cooler pipe/hose retaining bolt to the frame and the return hose to the cooler pipe/hose, fill the power steering system, bleed the power steering system and inspect the power steering system for leaks.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Return Hose (3.1L)?
A:
You need to place a drain pan under the vehicle to catch any draining power steering fluid, and remove the coolant reservoir, the return hose from the power steering pump, the return hose from the retaining bracket on the engine, the return hose from the cooler pipe/hose and the return hose from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you install the Power Steering Return Hose (3.1L)?
A:
You need to install the power steering return hose to the cooler pipe/hose, the return hose to the retaining bracket on the engine, the return hose to the power steering pump and the coolant reservoir, fill the power steering system, bleed the power steering system, inspect the power steering system for leaks and remove the drain pan from under the vehicle.
By Bob
GM Specialist
02/11/2022See more FAQs (2)