< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick Century Fuel Pressure Regulator
PartNumber: 17113622
Product Specifications- Notes: All Models; 3.1l
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 3.9 x 3.4 x 1.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Fuel Pressure Regulator
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$117.35 MSRP:$221.43You Save: $104.08 (48%)
Delphi® Fuel Injection Pressure Regulator for 2005 Buick Century
PartNumber: FP10300Product Specifications- Adjustable: No
- Inlet Port Diameter: 0.67''
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Bolt
- Outlet Port Diameter: 20.0 mm
- Outlet Quantity: 1
- Outlet Type: Threaded
- System Pressure: 54
- UPC: 689604154007
- Part Description: 2005 Buick Century Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Buick Century | Custom | All Engines
- 2005 Buick Century | Limited | All Engines
- 2005 Buick Century | Special Edition | All Engines
$53.10
Walker Products® Fuel Injection Pressure Regulator for 2005 Buick Century
PartNumber: 255-1186Product Specifications- Notes: Incl.O-Rings
- UPC: 724620048401
- Part Description: 2005 Buick Century Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$37.21
Original Engine Management® Fuel Injection Pressure Regulator for 2005 Buick Century
PartNumber: FPR10Product Specifications- Automotive Performance Item: No
- Contents: Includes Caution Sheet
- Fuel Type: Gas
- Functions: Regulator
- Material: Steel
- Mounting Type: Bolt Mount
- Nipple Orientation: Straight
- Number of Outlets: 2
- OE Part Number: 17113622
- Part Finish: Brass
- Port Quantity: 2
- Regulator Finish: Yellow Dichromium
- Regulator Material: Steel
- UPC: 841266083112
- Part Description: 2005 Buick Century Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
FAQ for Fuel Pressure Regulator Repair
Q: How do you remove the Fuel Rail Assembly?
A:
You need to disconnect the negative battery cable, relieve the fuel system pressure, remove the upper intake manifold, the fuel pipe retainer clip bolt, the engine fuel feed pipe from the fuel rail, the engine fuel return pipe from the fuel pressure regulator, and the fuel feed and the fuel return pipe O-rings, discard the O-rings, disconnect the main fuel injector wiring harness connector, pull up the lock release on the fuel injector electrical connectors, depress the lock tabs and disconnect the fuel injector electrical connectors, remove the fuel injector wiring harness from the fuel rail, disconnect the engine coolant temperature (ECT) sensor electrical connector and remove the fuel rail bolts, the fuel rail assembly and the fuel injector O-ring seal from the spray tip end of each injector, and then discard the O-ring seals if damaged.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the engine fuel return pipe nut?
A:
The recommended torque is 17 Nm (13 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the engine fuel feed pipe nut?
A:
The recommended torque is 17 Nm (13 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Fuel Pressure Gage?
A:
You need to install the J 34730-1A with the J 34730-262 to the fuel pressure service connection, located on the fuel rail, turn ON the ignition, place the bleed hose of the fuel pressure gage into an approved gasoline container, open the bleed valve on the fuel pressure gage to bleed the air from the fuel pressure gage, command the fuel pump ON with a scan tool until all of the air is bled out of the gage, close the bleed valve on the fuel pressure gage, command the fuel pump ON with a scan tool and inspect for fuel leaks.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Fuel Pressure Regulator?
A:
You need to relieve the fuel system pressure, disconnect the fuel pressure regulator vacuum line, remove the fuel return pipe from the fuel pressure regulator and the fuel pressure regulator screw, use a shop towel to catch any spilled fuel to lift and twist the fuel pressure regulator to remove the fuel pressure regulator from the fuel rail, remove the retainer and the spacer bracket from the fuel rail, remove and discard and the fuel pressure regulator inlet and the fuel return pipe O-rings, discard the O-rings and inspect the filter screen for contamination. If contaminated, you can replace the fuel pressure regulator.
By Bob
GM Specialist
29/10/2022Q: How to relieve the Fuel Pressure?
A:
You need to disconnect the negative battery cable, install the J 34730-262 to the fuel pressure connection, connect J 34730-1A to the fuel pressure gage fitting, wrap a shop towel around the fuel pressure connection to avoid spillage, install the bleed hose into an approved container and open the valve to bleed the system pressure and drain any fuel remaining in the fuel pressure gauge into an approved container.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the fuel pressure regulator screw?
A:
The recommended torque is 8.5 N.m (75 lb in).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the engine fuel return pipe nut?
A:
The recommended torque is 17 Nm (13 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How do you install the Fuel Pressure Regulator?
A:
You need to lubricate the new O-rings with clean engine oil and install the O-rings to the fuel pressure regulator, install the fuel return pipe to the fuel pressure regulator, the new retainer, and the spacer bracket to the slot on the fuel rail, the fuel pressure regulator to the fuel rail and the fuel pressure regulator screw, connect the fuel pressure regulator vacuum line, verify that the retainer and spacer bracket is engaged in slots in the fuel rail, grasp and pull on the regulator to ensure that the regulator is properly seated, connect the negative battery cable and inspect the fuel system for leaks.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Fuel Pressure Gage?
A:
You need to place the fuel pressure gage bleed hose into an approved container and open the bleed valve to bleed fuel system pressure and a shop towel under the fuel pressure gage adaptor fitting to catch any remaining fuel spillage, remove the J 34730-1A from the adaptor fitting and the J 34730-262, drain any fuel remaining in the fuel pressure gage into an approved container and install the cap on the fuel pressure connection.
By Bob
GM Specialist
29/10/2022See more FAQs (5)