< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Ball Joints
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick Century Ball Joint
PartNumber: 88965333
Product Specifications- Notes: All Models
- Location: Driver Side; Passenger Side
- Other Names: Ball Joint, Lower Ball Joint
- Item Dimensions: 6.9 x 4.5 x 4.4 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88955451, 22157089
- Part Description: 2005 Buick Century Ball Joint
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$46.47 MSRP:$76.93You Save: $30.46 (40%)
Delphi® Front Lower Ball Joint for 2005 Buick Century
PartNumber: TC1834Product Specifications- Height: 95.0
- Item Grade: Standard Replacement
- Length: 96
- Stud Type: Threaded
- UPC: 689604275627
- Width: 83.0
- Part Description: 2005 Buick Century Front Lower Ball Joint
Vehicle Fitment- 2005 Buick Century | All Trims | All Engines
$37.86
Centric® Premium™ Front Lower Ball Joint for 2005 Buick Century
PartNumber: 610.62013Product Specifications- UPC: 805890787518
- Part Description: 2005 Buick Century Premium™ Front Lower Ball Joint
Vehicle Fitment- 2005 Buick Century | All Trims | All Engines
$26.69
FAQ for Ball Joint Repair
Q: How do you remove the Lower Ball Joint?
A:
You need to remove the tire and wheel, drill a pilot hole through the rivets and the remainder of the rivets, use a hammer and a chisel to remove the remainder of the rivet heads, remove the cotter pin from the ball stud, loosen the ball stud nut, install the J 41820 over the ball stud and lower control arm, rotate the ball stud nut counterclockwise to separate the ball stud from the steering knuckle and remove the J 41820, the ball stud nut and the ball stud from the lower control arm.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the new ball stud nuts?
A:
The recommended torque is 68 Nm (50 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the ball stud castle nut?
A:
The recommended torque is 20 Nm (15 ft. lbs.) plus an additional 120 degrees.
By Bob
GM Specialist
29/10/2022Q: How do you install the Lower Ball Joint?
A:
You need to install the ball stud to the lower control arm, the new ball stud bolts facing down, away from the ball stud, install the new ball stud nuts, the ball stud to the steering knuckle, the ball stud castle nut, a new cotter pin and bend the ends and the tire and wheels and check the wheel alignment.
By Bob
GM Specialist
29/10/2022