FAQ for Heater Hose Repair
Q: What is the recommended torque when installing the heater/A/C tube retaining nut to the stud at the frame?
A:
You can tighten the nut to 7 N.m (62 lb in).
By BobGM Specialist
01/11/2022 Q: What should you drain before replacing the auxiliary heater pipe?
A:
You should drain the cooling system.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the outlet heater hose?
A:
The procedure is to remove the following: the air intake tube, the heater and surge tank hoses, the outlet heater hose from the water pump, the outlet heater hose from the surge tank, and the outlet heater hose.
By BobGM Specialist
01/11/2022 Q: What tool can you use when leakage in the system damages the rear A/C or heater lines?
A:
You can use the J 41425.
By BobGM Specialist
01/11/2022 Q: What is the first step for installing the outlet heater hose?
A:
The first step is to install the outlet heater hose.
By BobGM Specialist
01/11/2022 Q: What should you first install when installing the inlet heater hose?
A:
You should first install the inlet heater hose.
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the inlet heater hose?
A:
The first step is to drain the cooling system.
By BobGM Specialist
01/11/2022 See more FAQs (2)