FAQ for Air Temperature Sensor Repair
Q: How do you install the upper auxiliary air temperature sensor?
A:
You can install the rear upper A/C temperature sensor, connect the electrical connector and install the right-side C-pillar trim panel.
By BobGM Specialist
01/11/2022 Q: How do you replace the mass air flow (MAF)/intake air temperature (IAT) sensor?
A:
You can remove the air cleaner outlet duct, pull out the gray connector position assurance (CPA) retainer, push down on the black clip, loosen the MAF/IAT clamp and remove the MAF/IAT sensor from the air cleaner assembly.
By BobGM Specialist
01/11/2022 Q: How do you install the ambient air temperature sensor?
A:
You can install the ambient air temperature sensor, connect the electrical connector to the ambient air temperature sensor and install the Park/Turn Signal.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the upper right air temperature sensor?
A:
The procedure is to install the upper right air temperature sensor, connect the electrical connector and install the I/P upper trim panel.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the lower auxiliary air temperature sensor?
A:
The procedure is to remove the right side C-pillar trim panel, disconnect the electrical connector from the auxiliary lower A/C temperature sensor, and remove the auxiliary lower A/C temperature sensor from the air distribution duct.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the ambient air temperature sensor?
A:
The procedure is to disconnect the electrical connector from the ambient air temperature sensor and remove the ambient air temperature sensor.
By BobGM Specialist
01/11/2022 Q: How do you install the upper left air temperature sensor?
A:
You can install the upper left air temperature sensor to the air distributor duct and connect the electrical connector to the upper left air temperature sensor.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the MAF/IAT clamp?
A:
You can tighten the clamp to 7 N.m (62 lb in).
By BobGM Specialist
01/11/2022 Q: How do you install the lower auxiliary air temperature sensor?
A:
You can install the rear lower A/C temperature sensor, connect the electrical connector and install the right-side C-pillar trim panel.
By BobGM Specialist
01/11/2022 Q: How do you replace the upper auxiliary air temperature sensor?
A:
You can remove the right side C-pillar trim panel, disconnect the electrical connector and remove the rear upper A/C temperature sensor.
By BobGM Specialist
01/11/2022 See more FAQs (9)