Other Names: Extension, Extension Panel, Wheelhouse
Item Dimensions: 16.3 x 7.4 x 2.0 inches
Item Weight: 3.00 Pounds
Fitment Type: Direct Replacement
Part Description: 2004 GMC Yukon Extension, Rear Wheelhouse Panel Front
More Info
Vehicle Fitment
2004 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Fender Splash Shield Repair
Q: What is the removal procedure for the rear wheelhouse inner panel extension?
A:
The procedure is to remove the following: the retainer strap from the backside of the inner panel extension, the retainers from the inner panel extension front, the retainers from the inner panel extension rear, and the rear wheelhouse inner panel extension from the vehicle.
By Bob
GM Specialist
01/11/2022
Q: How do you install the wheelhouse panel?
A:
You can install the wheelhouse panel to the wheelhouse, install the push-in retainers to the wheelhouse panel, install the retainers to the front fascia and install the top clips retaining the harness to the top of the wheelhouse panel.
By Bob
GM Specialist
01/11/2022
Q: How do you install the rear wheelhouse inner panel extension?
A:
You can install the rear wheelhouse inner panel extension to the vehicle, install the retainers to the inner panel extension rear, install the retainers to the inner panel extension front and install the retainer strap to the backside of the inner panel extension.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the wheelhouse panel?
A:
The procedure is to remove the push-in retainers, the retainers, the top clips retaining the harness to the top of the wheelhouse panel, and the wheelhouse panel from the wheelhouse.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you install the cupholder (Non-Luxury)?
A:
You can install the Cup Holder and ensure around the corners of the cup holder are seated properly.
Q: What should you replace if the hinge pins or bushings are damaged?
Q: What is the removal procedure for the front door lock actuator?
A:
The procedure is to remove the following: the door trim panel, the water deflector, the rubber plug, the bolts retaining the Door Lock Actuator to the door, the door lock actuator, and the control rods as an assembly and the control rods.