FAQ for Door Hinge Repair
Q: What is the first step for replacing the front body side door hinge?
A:
The first step is to remove all of the related panels and components.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when aligning the hinge and the backing plate with the holes in the door and installing the bolts?
A:
You can tighten the hinge to the pillar nuts to 25 N.m (18 lb-ft).
By BobGM Specialist
01/11/2022 Q: What should you replace if the hinge pins or bushings are damaged?
A:
You should replace the door hinge as an assembly.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front body side hinge?
A:
The procedure is to remove the following: related panels and components, any excess sealer surrounding the existing hinge, the hinge, and all of the remaining welds from the pillar surface.
By BobGM Specialist
01/11/2022 Q: What tool can you use to separate the hinge from the pillar?
A:
You can use a chisel.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front door side hinge?
A:
The procedure is to remove the following: related panels and components, any excess sealer surrounding the hinge, the hinge, and all of the remaining welds from the door surface.
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the rear side door hinge?
A:
The first step is to remove all of the related panels and components.
By BobGM Specialist
01/11/2022 Q: How do you replace the front side door hinge pin and bushing?
A:
You should remove the following: the door, the hinge pins from the hinge, and the old bushings from the hinges.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the hinge to the pillar with the supplied nuts?
A:
You can tighten the hinge nuts to 25 N.m (18 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the purpose of removing all of the remaining welds from the pillar surface?
A:
The purpose is to ensure a flush fit of the service hinge.
By BobGM Specialist
01/11/2022 See more FAQs (17)