FAQ for Door Lock Actuator Repair
Q: What is the first step for replacing the door lock actuator (Cargo Door)?
A:
The first step is to remove the cargo door trim panel, as necessary.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the bolts which retain the door lock actuator to the door?
A:
You can tighten the screws to 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the door lock actuator (Liftgate)?
A:
The procedure is to remove the following: the upper and lower trim panels, the cables attached to the actuator assembly, the bolts from the latch actuator, the actuator from the liftgate, and the liftgate lock cylinder.
By BobGM Specialist
01/11/2022 Q: What is the purpose of removing the rubber plug?
A:
The purpose is to disengage the outside handle rod retainer.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front door lock actuator?
A:
The procedure is to remove the following: the door trim panel, the water deflector, the rubber plug, the bolts retaining the door lock actuator to the door, the door lock actuator, and the control rods as an assembly and the control rods.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the rear door lock actuator?
A:
You should raise the window.
By BobGM Specialist
01/11/2022 Q: What is the first step for installing the front door lock actuator?
A:
The first step is to install the control rods to the assembly.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the bolts that retain the actuator assembly to the door?
A:
You can tighten the bolts to 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the cables to the actuator assembly?
A:
You can tighten the bolts to 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the front door lock actuator?
A:
The first step is to raise the window glass.
By BobGM Specialist
01/11/2022 See more FAQs (5)