Part Description: 2004 GMC Yukon Seal-Front Side Door Opening Frame Filler Panel
More Info
Vehicle Fitment
2004 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Door Seal Repair
Q: What is the first step for installing the rear door window weatherstrip?
A:
The first step is to align the weatherstrip in the window frame flange.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the front door opening weatherstrip?
A:
The procedure is to install the weatherstrip, the windshield pillar molding, the hinge pillar trim panel, and the sill plate.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the rear door weatherstrip?
A:
The procedure is to remove the following: the rear door sill plate, the center pillar molding, the third pillar trim panel, and the weatherstrip from the door opening flange.
By Bob
GM Specialist
01/11/2022
Q: How do you replace the front door opening weatherstrip?
A:
You can remove the following: the sill plate, the hinge pillar trim panel, the windshield pillar molding, and the weatherstrip from the rear side door opening.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the front door weatherstrip (Door Opening)?
A:
The procedure is to remove the following: the sill plate, the hinge pillar trim panel, the windshield pillar molding, and the weatherstrip from the rear side door opening.
By Bob
GM Specialist
01/11/2022
Q: How do you install the front door weatherstrip (upper)?
A:
You can position the roof drip molding over the pinch-weld, install the roof drip molding and close the door.
By Bob
GM Specialist
01/11/2022
Q: How do you install the front door weatherstrip (Door Opening)?
A:
You can install the following: the weatherstrip, the windshield pillar molding, the hinge pillar trim panel, and the sill plate.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the front door upper auxiliary weatherstrip?
A:
The procedure is to open the door and pull the roof drip molding from the pinch-weld flange and the windshield molding flange.
By Bob
GM Specialist
01/11/2022
Q: How do you install the front door upper auxiliary weatherstrip?
A:
You can push the roof drip molding over the pinch-weld flange and close the door.
By Bob
GM Specialist
01/11/2022
Q: How do you install the rear door weatherstrip?
A:
You can install the weatherstrip, install the third pillar trim panel, install the center pillar molding and install the rear door sill plate.
By Bob
GM Specialist
01/11/2022
See more FAQs (7)
FAQ for Other Repair Info
Q: What is the removal procedure for the cupholder (Non-Luxury)?
A:
The procedure is to grab the middle of the Cup Holder firmly, pull it outwards to release the clips, and remove the cup holder from the console.
Q: What should you replace if the hinge pins or bushings are damaged?
Q: What is the removal procedure for the front door lock actuator?
A:
The procedure is to remove the following: the door trim panel, the water deflector, the rubber plug, the bolts retaining the Door Lock Actuator to the door, the door lock actuator, and the control rods as an assembly and the control rods.