FAQ for Door Latch Assembly Repair
Q: What is the recommended torque when installing the upper bolt?
A:
You can tighten the bolt to 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What should you first remove when replacing the door lock actuator (Cargo Door)?
A:
You should first remove the cargo door trim panel, as necessary.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the left rear door latch control handle?
A:
The procedure is to remove the following: the rear door trim panel, the latch control handle screws, and the latch control handle.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the latch control handle screws?
A:
You can tighten the screws to 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the bolts that retain the actuator assembly to the door?
A:
You can tighten the bolts to 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the door latch (Cargo Door Lower)?
A:
The procedure is to remove the bolts that retain the latch assembly to the door, disconnect the electrical connector and remove the actuator cable assembly from the latch.
By BobGM Specialist
01/11/2022 Q: How do you install the door latch (Cargo Door Lower)?
A:
You can install the actuator cable assembly to the latch, connect the electrical connector and install the bolts that retain the latch assembly to the door.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the door latch (Cargo Door Upper)?
A:
The procedure is to remove the following: the door trim panel, the bolts that retain the latch to the door, the latch from the door, the actuator cable assembly from the latch, the latch bolts, and the latch from the door.
By BobGM Specialist
01/11/2022 See more FAQs (3)