Notes: Temperature 186 Degrees; Seal Included Seal Included; W/GM Replacement Water Pump; Excludes Housing; OE Temperature
Bypass Plate Diameter: 1.5"
Flange Diameter (With Seal): 2.27"
Flange Diameter (Without Seal): 2.27"
Height from Flange to Bottom: 1.82"
Height from Flange to Top of Bridge: 0.95"
OE Part Number: 12600172, 12581595, 12600171, 12570358, 12581594, 12568911, 92177005
Temperature (F): 186 Degrees
UPC: 033342074996
Part Description: 2004 Chevrolet Silverado 1500 Heavy Duty Engine Coolant Thermostat
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 4.8L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 5.3L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 6.0L
Show More
FAQ for Thermostat Repair
Q: What is the removal procedure for the thermostat?
A:
The procedure is to remove the Positive Crankcase Ventilation (PCV) hose, the air cleaner adapter nut, the inlet hose, the water outlet studs, the water outlet, the thermostat, and the O-ring seal.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the thermostat?
A:
The proper way is to install a NEW O-ring seal, on the thermostat, the water outlet, the water outlet studs, the inlet hose, the air cleaner adapter nut, and the PCV hose.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the description for the radiator support?
A:
The description is that the Radiator support assembly is made of aluminum alloy. You can repair minor damage with ER-4043 welding wire and 100 percent argon shielding gas. The upper tie-bar and the vertical support portion of the radiator support assembly are bolt-on components. The tie-bar and the vertical support are available as part of the radiator support assembly or can be ordered separately.
Q: What is the removal procedure for the water pump?
A:
The procedure is to remove the positive crankcase ventilation (PCV) hose, the air cleaner adapter nut, the cooling fan, the drive belt, the radiator outlet hose, the Water Pump, and the water pump gaskets.
Q: What is the proper way to install the engine oil cooler pipe/hose quick-connect fitting?
A:
The proper way is to install a new retaining ring, hook one of the open ends of the retaining ring, rotate the retaining ring around the connector, install the Engine Oil Cooler line, and then inspect and fill the engine oil to the proper level.