Notes: All Models; 4.8l, 5.3l; All;All Models; 6.0l; All
Other Names: Injector
Item Dimensions: 4.6 x 1.7 x 1.6 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2004 Chevrolet Silverado 1500 Injector
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$119.81MSRP: $217.84
You Save: $98.03 (46%)
FAQ for Fuel Injector Repair
Q: What is the proper way to install the fuel injector?
A:
The proper way is to lubricate the NEW injector O-ring seals with clean engine oil, install the fuel injector and the injector retainer, and then install the fuel meter body.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed when you remove fuel pipes?
A:
You should make sure that the fuel pipe O-rings, washers, and spacers are present and in their proper position.
By Bob
GM Specialist
01/11/2022
Q: What is the description of the fuel injector?
A:
The description is that the Multec 2 fuel injector assembly is a solenoid device controlled by the control module that meters pressurized fuel to a single engine cylinder. The control module energizes the high-impedance, 12 ohms, injector solenoid to open a normally closed ball valve.
By Bob
GM Specialist
01/11/2022
Q: What should be done due to variations in fuel quality in different areas of the country?
A:
The only preventative maintenance currently endorsed by GM regarding its gasoline engine fuel systems is the addition of GM Fuel System Treatment PLUS, P/N 88861011 (for U.S. ACDelco(R), use P/N 88861013) (in Canada, P/N 88861012), added to a tank of fuel at each oil change.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the fuel injector?
A:
The procedure is to remove the fuel meter body, the injector retainer lock nuts, and the retainer.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the function of the bulletin?
A:
This bulletin is being issued to inform dealers that there are two different types of Fuel Caps used on all 2004 full-size pick-ups and utilities with gasoline engines.
Q: What is the proper way to install the fuel lever sensor?
A:
The proper way is to install the Fuel Level Sensor, the fuel level sensor retaining clip, the fuel level sensor electrical connector retaining clip, and the fuel sender.
Q: What is the procedure for fuel system cleaning?
A:
The procedure is to remove the sending unit, inspect the fuel strainer and the fuel pump inlet for dirt and debris, flush the Fuel Tank with hot water, pour the water out of the fuel sender assembly opening, and then install the sending unit.