< Back ×
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2004 Cadillac SRX Handle Asm-Rear Side Door Inside
PartNumber: 25759728
Product Specifications- Location: Passenger Side
- Other Names: Handle, Inside, Pull Handle
- Item Dimensions: 10.4 x 4.3 x 4.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Handle Asm-Rear Side Door Inside
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Handle, Rear Side Door Inside
PartNumber: 25759729
Product Specifications- Location: Driver Side
- Other Names: Handle, Inside, Pull Handle
- Item Dimensions: 9.8 x 6.6 x 3.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Handle, Rear Side Door Inside
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Interior Door Handle Repair
Q: What is the removal procedure for the front inside door handle?
A:
The procedure is to remove the following: the front door trim panel, the fastener, the door handle from the door trim panel, and the door handle from the door handle linkage.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear assist handle?
A:
The procedure is to remove the center pillar garnish trim, lower the headliner to access the assist handle fastener, remove the 2 screws that retain the assist handle to the roof and remove the assist handle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the door handle fastener?
A:
You can tighten the fastener to 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the front assist handle?
A:
You can position the assist handle to the headliner, install the two fasteners to retain the assist handle to the roof panel, secure the assist handle escutcheons to the outer edges of the assist handle and snap the escutcheons in place to secure.
By Bob
GM Specialist
01/11/2022Q: What is the first step for installing the rear inside door handle?
A:
The first step is to insert the inside door handle rod into the hole in the door handle assembly.
By Bob
GM Specialist
01/11/2022Q: How do you replace the rear inside door handle?
A:
You can remove the following: the rear door trim panel, the fastener, the inside door handle from the door trim panel, and the door handle from the door handle linkage.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the front assist handle?
A:
The procedure is to pry out the outer edge of the escutcheons, slide the escutcheon toward the center of the assist handle, remove the 2 screws retaining the assist handle to the roof panel and remove the assist handle.
By Bob
GM Specialist
01/11/2022Q: How do you install the rear assist handle?
A:
You can position the assist handle to the roof, install the two fasteners to retain the assist handle to the roof, install the headliner and remove the center pillar garnish trim.
By Bob
GM Specialist
01/11/2022See more FAQs (3)