FAQ for Door Lock Switch Repair
Q: How do you replace the power door lock switch?
A:
You can remove the inside handle bezel from the inner door panel and disconnect the electrical connector from the lock switch.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the door control module?
A:
The procedure is to remove the door trim panel, remove the door control module and disconnect the electrical connectors.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front door switch?
A:
The procedure is to insert a flat-bladed tool under the front edge of the front door switch, push the tool firmly towards the switch, lift it on the rear of the switch plate, disconnect electrical connectors and remove the appropriate switch from the bezel.
By BobGM Specialist
01/11/2022 Q: How do you install the door control module?
A:
You can connect the electrical connectors, snap the door module, install the door trim panel and reprogram the front door module.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the door control module?
A:
You can connect the electrical connectors to the control module, snap the door module onto the mounting studs, install the door trim panel and reprogram the front door module.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the power door lock switch?
A:
You can snap the door lock switch into the door switch bezel, connect the electrical connector, slide the bezel over the door handle and snap the bezel into position.
By BobGM Specialist
01/11/2022 Q: What must you reprogram when replacing door control modules on export vehicles?
A:
You must reprogram the door module to relearn the vehicle identification number (VIN).
By BobGM Specialist
01/11/2022 Q: How do you install the front door switch?
A:
You can snap the switch into the bezel, connect the electrical connectors, install the switch into the door trim panel, engage the rear of the switch to the door panel and press down on the switch plate evenly to engage the retainer.
By BobGM Specialist
01/11/2022 Q: How do you replace the door control module?
A:
You can remove the door trim panel, remove the door control module and disconnect the electrical connectors from the control module.
By BobGM Specialist
01/11/2022 See more FAQs (4)