Part Description: 2004 Cadillac SRX Link Asm-Rear Side Door Check
More Info
Vehicle Fitment
2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Door Check Repair
Q: What is the recommended torque when installing the check link to door nuts?
A:
You can tighten the nuts to 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the check link nuts?
A:
You can tighten the nuts to 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the rear door check link?
A:
The procedure is to remove the following: the door trim panel, the check link to hinge pillar bolts, the check link to door nuts, and the check link from the door.
By Bob
GM Specialist
01/11/2022
Q: How do you replace the front door check link?
A:
You can remove the following: the door trim panel, the door check link to the body bolt, the check link to the door nuts, and the check link from the door.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the power door lock switch?
A:
You can snap the Door Lock Switch into the door switch bezel, connect the electrical connector, slide the bezel over the door handle and snap the bezel into position.
Q: How do you replace the rear door hinge?
A:
You can open the rear and the front doors, support the door, mark the position of the hinge on the body, remove the hinge-to-body bolts and remove the hinge-to-door bolts.
Q: What tool can you use to lift the electrical connector lock and disconnect the electrical connector?