2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$50.77MSRP: $79.87
You Save: $29.10 (37%)
FAQ for Door Lock Cylinder Repair
Q: What is the proper way to install the door lock cylinder?
A:
You can install the following: the lock cylinder, the lock cylinder retainer clip, and the front door outside door handle.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the door lock cylinder?
A:
The procedure is to install the lock cylinder to the outside door handle housing, install the lock cylinder retainer clip and install the front door outside door handle.
By Bob
GM Specialist
01/11/2022
Q: How do you replace the door lock cylinder?
A:
You can remove the following: the front door outside door handle, the lock cylinder retainer clip, and the lock cylinder from the outside door handle housing.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you replace the front door check link?
A:
You can remove the following: the door trim panel, the Door Check link to the body bolt, the check link to the door nuts, and the check link from the door.
Q: What is the proper way to install the power door lock switch?
A:
You can snap the Door Lock Switch into the door switch bezel, connect the electrical connector, slide the bezel over the door handle and snap the bezel into position.
Q: What is the recommended torque when installing the bolts?
A:
You can tighten the hinge to pillar bolts to 25 N.m (18 lb-ft).