Part Description: 2004 Cadillac SRX Rear Side Door Lock Assembly
More Info
Vehicle Fitment
2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Door Latch Assembly Repair
Q: What tool can you use to lift the electrical connector lock and disconnect the electrical connector?
A:
You can use a small flat-bladed tool.
By Bob
GM Specialist
01/11/2022
Q: What is the first step for replacing the rear door latch?
A:
The first step is to remove the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the door latch screws?
A:
You can tighten the screws to 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you replace the front door check link?
A:
You can remove the following: the door trim panel, the Door Check link to the body bolt, the check link to the door nuts, and the check link from the door.
Q: What is the proper way to install the power door lock switch?
A:
You can snap the Door Lock Switch into the door switch bezel, connect the electrical connector, slide the bezel over the door handle and snap the bezel into position.
Q: What is the recommended torque when installing the bolts?
A:
You can tighten the hinge to pillar bolts to 25 N.m (18 lb-ft).