< Back ×
My Vehicle Change Vehicle
2002 Buick LeSabre
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Four Seasons® A C Evaporator Core for 2002 Buick LeSabre
PartNumber: 54874Product Specifications- Notes: Evaporator replacement for this application may require considerable time, specialty tools, and training.
- Core Depth Fraction: 2-7/8; 3
- Core Depth MM: 73.025; 76.200
- Core Height Fraction: 10-1/2; 10-3/4
- Core Height MM: 266.700; 273.050
- Core Width Fraction: 11; 11-1/8
- Core Width MM: 279.400
- Depth: 2.875; 3.000
- Height: 10.500; 10.750
- Inlet Fitting Type: Block Fitting
- Material: Aluminum
- O-Ring A Number/Desc: [24402] / Slimline Washer
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24404] / Slimline Washer
- O-Ring B Quantity: 1
- Outlet Fitting Type: Block Fitting
- UPC: 096361548749
- Width: 11.000; 11.125
- Part Description: 2002 Buick LeSabre A C Evaporator Core
Vehicle Fitment- 2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
$100.98
OEM (Genuine) 2002 Buick LeSabre Evaporator Asm, A/C
PartNumber: 52494344
Product Specifications- Notes: W/O Dual Climate Control; W/Dual Climate Control; Bonneville, Lesabre
- Other Names: Evaporator, Evaporator Core
- Item Dimensions: 21.6 x 17.5 x 13.7 inches
- Item Weight: 7.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52476970, 52482813
- Part Description: 2002 Buick LeSabre Evaporator Asm, A/C
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for A/C Evaporator Core Repair
Q: What should be done before removing the passenger compartment air filters?
A:
You will need to dry the evaporator core by turning the engine on. In addition, run the blower motor on high and in a recirculating mode, with the temperature control on maximum heat for 10 minutes.
By Bob
GM Specialist
28/10/2022Q: What should be done after turning the engine off?
A:
You will need to let the engine sit for 3-5 minutes.
By Bob
GM Specialist
28/10/2022Q: What's the recommended torque for the upper HVAC module screws?
A:
The recommended torque is 1.4 N.m (12 lb in).
By Bob
GM Specialist
28/10/2022Q: What's the proper way to remove the evaporator core?
A:
The proper way is to remove the HVAC module assembly, remove the seal from around the heater core and the evaporator tubes, remove the upper HVAC evaporator case screws, separate the HVAC evaporator case halves, and remove the evaporator core.
By Bob
GM Specialist
28/10/2022