FAQ for Air Temperature Sensor Repair
Q: What's the installation procedure for the intake air temperature (IAT) sensor?
A:
The installation procedure is to position and insert the IAT sensor into the rear air intake duct and connect the electrical connector to the IAT sensor.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the upper left air temperature sensor?
A:
The installation procedure is to connect the electrical connector to the air temperature sensor, install the air temperature sensor into the duct and twist it clockwise to lock it in place, and install the instrument panel end cap.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the intake air temperature (IAT) sensor?
A:
The removal procedure is to turn OFF the ignition switch, disconnect the electrical connector from the intake air temperature (IAT) sensor then grasp, and, with a twisting and pulling motion, remove the IAT sensor from the intake air duct.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the lower left air temperature sensor?
A:
The removal procedure is to remove the sound insulator, disconnect the electrical connector from the sensor, and remove the sensor by turning 1/4 turn counterclockwise.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the ambient air temperature sensor?
A:
The removal procedure is to disconnect the electrical connector from the ambient air temperature sensor and remove the retainer and the ambient air temperature sensor.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the lower left air temperature sensor?
A:
The installation procedure is to connect the electrical connector to the sensor, install the sensor into the sound insulator and turn 1/4 turn clockwise, and install the sound insulator.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the ambient air temperature sensor?
A:
The installation procedure is to install the ambient air temperature sensor with the retainer and connect the electrical connector to the ambient air temperature sensor.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the upper left air temperature sensor?
A:
The removal procedure is to remove the left instrument panel end cap, remove the air temperature sensor by twisting 1/4 turn counterclockwise, and disconnect the electrical connector from the air temperature sensor.
By BobGM Specialist
01/11/2022 See more FAQs (3)