107 products about 2015 Nissan Xterra Driveline, Axles & 4WD found
Product Specifications- Notes: Xterra; W/O Locking Differential
- Other Names: Axle Seal, Bearing Oil Seal
- Item Dimensions: 2.6 x 2.6 x 0.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2015 Nissan Xterra Seal-Oil, Rear Axle Shaft
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X, XE | 6 Cyl 3.3 L GAS, 6 Cyl 4.0 L GAS
$9.72 MSRP: $13.27
You Save: $3.55 (27%)
Product Specifications- Notes: Xterra; W/Locking Differential
- Other Names: Axle Seal
- Item Dimensions: 4.2 x 3.2 x 0.5 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2015 Nissan Xterra Seal-Oil Rear Axle Shaft
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$30.47 MSRP: $41.63
You Save: $11.16 (27%)
Product Specifications- Notes: Xterra; W/Locking Differential
- Other Names: Pinion Seal
- Item Dimensions: 1.0 x 3.6 x 3.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38189-EB10A, 38189-8S100
- Part Description: 2015 Nissan Xterra Seal-Oil
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$20.13 MSRP: $27.52
You Save: $7.39 (27%)
Product Specifications- Notes: Xterra; W/Locking Differential
- Other Names: Pinion Seal
- Item Dimensions: 1.0 x 3.6 x 3.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38189-EB10A, 38189-8S100
- Part Description: 2015 Nissan Xterra Seal-Oil
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$20.13 MSRP: $27.52
You Save: $7.39 (27%)
Product Specifications- Other Names: Axle Shaft, Axle Shaft Assembly
- Item Dimensions: 8.2 x 8.4 x 34.0 inches
- Item Weight: 25.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 38162-EB45B
- Part Description: 2015 Nissan Xterra Shaft Rear Axle
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$750.59 MSRP: $1033.88
You Save: $283.29 (28%)
Product Specifications- Other Names: Axle Shaft, Axle Shaft Assembly
- Item Dimensions: 8.2 x 8.4 x 34.0 inches
- Item Weight: 25.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 38162-EB45B
- Part Description: 2015 Nissan Xterra Shaft Rear Axle
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$750.59 MSRP: $1033.88
You Save: $283.29 (28%)
Product Specifications- Notes: Master Kit; Dana 44 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311543088
- Width: 2.50"
- Part Description: 2015 Nissan Xterra Rear Master Differential Rebuild Kit
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Xterra
- Other Names: Universal Joints
- Item Dimensions: 4.8 x 4.2 x 2.8 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 37126-3S525
- Part Description: 2015 Nissan Xterra Kit Journal
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$53.07 MSRP: $72.52
You Save: $19.45 (27%)
Product Specifications- Notes: Xterra
- Other Names: Universal Joints
- Item Dimensions: 4.8 x 4.2 x 2.8 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 37126-3S525
- Part Description: 2015 Nissan Xterra Kit Journal
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$53.07 MSRP: $72.52
You Save: $19.45 (27%)
Product Specifications- Notes: Standard Kit; Dana 44 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311543071
- Width: 2.50"
- Part Description: 2015 Nissan Xterra Rear Differential Rebuild Kit
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: w/Fuji Univance TX15B Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2015 Nissan Xterra Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Xterra; W/O Locking Differential
- Item Dimensions: 3.5 x 3.5 x 0.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38440-EC000
- Part Description: 2015 Nissan Xterra Bearing-Differential Side
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$80.95 MSRP: $110.60
You Save: $29.65 (27%)
Product Specifications- Notes: Xterra; W/O Locking Differential
- Item Dimensions: 3.5 x 3.5 x 0.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38440-EC000
- Part Description: 2015 Nissan Xterra Bearing-Differential Side
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$80.95 MSRP: $110.60
You Save: $29.65 (27%)
Product Specifications- Notes: Xterra; W/O Locking Differential
- Item Dimensions: 3.5 x 3.5 x 0.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38440-EC000
- Part Description: 2015 Nissan Xterra Bearing-Differential Side
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$80.95 MSRP: $110.60
You Save: $29.65 (27%)
Product Specifications- Notes: w/Spicer 44 Axle; w/8.5in Ring Gear
- Part Description: 2015 Nissan Xterra Front Inner Differential Bearing
Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; Coated for Alum Driveshaft
- Bearing Cap Diameter: 1.063"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286110793
- Part Description: 2015 Nissan Xterra Grade Coated™ Rear U-Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: w/Fuji Univance TX15B Transfer Case; 2Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2015 Nissan Xterra Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Dana 44 Axle
- Cup Length: 0.906"
- Cup Radius: 0.13"
- Outside Diameter: 3.500"
- UPC: 085311057561
- Width: 1.187"
- Part Description: 2015 Nissan Xterra Rear Axle Shaft Bearing Race
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Xterra w/ Man. Trans.:
- Cone ID: 1.563"
- Outside Diameter: 2.876"
- UPC: 085311058643
- Width: 0.766"
- Part Description: 2015 Nissan Xterra Rear Axle Shaft Bearing Kit
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2015 Nissan Xterra Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Brute Force Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099226
- Part Description: 2015 Nissan Xterra Front Greaseable U Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- ABS Ring Included: No
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 27
- Length: 24 15/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 29
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 2015 Nissan Xterra Remanufactured CV Axle Assembly
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2015 Nissan Xterra Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Xterra; W/O Locking Differential
- Item Dimensions: 3.3 x 3.2 x 0.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38189-P0116, 38189-P0115
- Part Description: 2015 Nissan Xterra Seal-Oil, Drive Pinion
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$17.55 MSRP: $23.97
You Save: $6.42 (27%)
Product Specifications- Notes: Xterra; W/O Locking Differential
- Item Dimensions: 3.3 x 3.2 x 0.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38189-P0116, 38189-P0115
- Part Description: 2015 Nissan Xterra Seal-Oil, Drive Pinion
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$17.55 MSRP: $23.97
You Save: $6.42 (27%)
Product Specifications- Notes: Brute Force Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.622"
- UPC: 085311105927
- Part Description: 2015 Nissan Xterra Center Greaseable U Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2015 Nissan Xterra Grade Standard U-Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Brute Force Non Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.622"
- UPC: 085311105873
- Part Description: 2015 Nissan Xterra Center Non Greaseable U Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 2015 Nissan Xterra Spicer 1310 Series Grade Standard U-Joint
More Info Vehicle Fitment- 2015 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Xterra; M226; W/O Off Road Package
- Other Names: Axle Shaft
- Item Dimensions: 34.3 x 9.2 x 8.3 inches
- Item Weight: 24.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2015 Nissan Xterra Shaft Rear Axle
More Info Vehicle Fitment- 2015 Nissan Xterra | Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0 L GAS
$516.32 MSRP: $711.20
You Save: $194.88 (28%)