6 products about 2011 Saab 9-5 Wheel Hubs, Bearings, Seals & Components found
Product Specifications- UPC: 805890628743
- Part Description: 2011 Saab 9-5 Premium™ Hub And Bearing Assembly; With Abs Tone Ring / Encoder
Vehicle Fitment- 2011 Saab 9-5 | All Trims | All Engines
Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone; w/Saab F40 Trans
- Cone Bore: 1.0625"
- Cone Length: 0.5800"
- Cone Radius: 0.1400"
- Cup Bore: 1.9800"
- Cup Length: 10.6680 mm
- Cup Radius: 1.1680 mm
- Standout: 3.5560 mm
- Taper Bearing Cone: L44649
- Taper Bearing Cup: L44610
- Width: 0.5600"
- Part Description: 2011 Saab 9-5 Front Driver Side Inner Wheel Bearing and Race Set
More Info Vehicle Fitment- 2011 Saab 9-5 | All Trims | All Engines
Product Specifications- Notes: X-Tracker
- Bolt Circle Diameter A: 4.7244"
- Bolt Circle Diameter B: 4.5669"
- Bolt Hole Size: 0.472
- Bolt Size: M14X2.5
- Flange Diameter: 6.1811"
- Flange Offset: 1.6559"
- Inner Diameter: 1.3285"
- Number of Bolts: 5
- Number of Holes: 3
- Number of Splines: 30
- Sensor Ring: Yes
- UPC: 085311475815
- Wheel Pilot Diameter: 2.6311"
- Part Description: 2011 Saab 9-5 Front Passenger Side Wheel Bearing And Hub Assembly
More Info Vehicle Fitment- 2011 Saab 9-5 | All Trims | All Engines
Product Specifications- Notes: 5x120.7 mm bolt pattern; Wheel Hub Assy; Axle Nut Torque Spec: 111 ft-lbs / 150Nm, loosen 45 degrees & then torque to 185 ft-lbs / 250Nm
- Flange Diameter (Inch): 6.185
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.57
- Material: Steel
- Product Condition: New
- Spline Quantity: 30
- Stud Quantity: 5
- UPC: 029175923853
- Wheel Stud Size MM: M14 x 1.5
- Wiring Harness Included: No
- Part Description: 2011 Saab 9-5 WHEEL BEARING AND HUB ASSEMBLY
More Info Vehicle Fitment- 2011 Saab 9-5 | All Trims | 6 Cyl 2.8L
- 2011 Saab 9-5 | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: w/Saab F40 Trans
- Bore (Inch): 1.1811
- Bore (mm): 30.00
- Cone Length (Inch): 0.6299
- Cone Length (mm): 16.00
- Cone Radius (Inch): 0.0600
- Cone Radius (mm): 1.5240
- Cup Length (Inch): 0.5512
- Cup Length (mm): 14.00
- Cup Radius (Inch): 0.0600
- Cup Radius (mm): 1.5240
- Design: ISO Metric
- Outside Diameter (Inch): 2.4409
- Outside Diameter (mm): 62.00
- Series: 30200
- Standout (Inch): 0.1280
- Standout (mm): 3.2500
- Type: TS
- Width (Inch): 0.6791
- Width (mm): 17.2500
- Part Description: 2011 Saab 9-5 Wheel Bearing
More Info Vehicle Fitment- 2011 Saab 9-5 | All Trims | All Engines
Product Specifications- UPC: 805890648079
- Part Description: 2011 Saab 9-5 Premium™ Wheel Bearing And Hub Assembly
Vehicle Fitment- 2011 Saab 9-5 | All Trims | All Engines