19 products about 2011 Nissan Rogue Oxygen Sensors & Components found
Product Specifications- Notes: Lower; Rogue, Rogue Select; Rear; Upstream
- Item Dimensions: 4.7 x 4.7 x 2.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Nissan Rogue Heated Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | Krom, S, S Krom, SL, SV | 4 Cyl 2.5 L GAS
$222.34 MSRP: $314.05
You Save: $91.71 (30%)
Product Specifications- Notes: DENSO is the OE Manufacturer / Air Fuel Ratio Sensor
- Connector Gender: Male
- O2 Sensor Configuration: Direct Fit
- Position: Upstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511117259
- Wire Harness Length: 14.53" (369.1 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Air Fuel Ratio Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Upper, All; Rogue, Rogue Select; Front; All
- Item Dimensions: 8.4 x 4.5 x 4.1 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Nissan Rogue Air Fuel Ratio Sensor Assembly
More Info Vehicle Fitment- 2011 Nissan Rogue | S, S Krom, SV | 4 Cyl 2.5 L GAS
$246.26 MSRP: $336.43
You Save: $90.17 (27%)
Product Specifications- Notes: with California Emission System;without California Emission System;19in Length
- Connector Shape: Square
- Position: Rear
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604205440
- Wire Harness Length: 19" (475 mm)
- Wrench Size: 0.88" (22 mm)
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | S | 4 Cyl 2.5L
- 2011 Nissan Rogue | S Krom | 4 Cyl 2.5L
- 2011 Nissan Rogue | SV | 4 Cyl 2.5L
Show More Product Specifications- Notes: Calif; Loc. After 2ndary Catalyst; OE Quality Replacement Sensor
- Connector Gender: Male
- Installation Type: Screw
- Location: After Secondary Catalyst
- O2 Sensor Configuration: Direct Fit
- Position: Downstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511114210
- Wire Harness Length: 18.54" (470.9 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: w/Fed Emissions; Bank 1 Sensor 2;w/Calif Emissions; Bank 1 Sensor 2; Located After Primary Catalyst;
- Connector Gender: Male
- Connector Shape: Rectangular
- Installation Type: Screw
- Overall Length: 20 1/16"
- Position: Downstream Rear
- Sensor Type: Heated - Zirconia
- Terminal Quantity: 4
- Thread: M18 X 1.5 mm
- UPC: 671607539356
- Wrench Size: 0.88" (22 mm)
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Rogue, Rogue Select; Rear; Downstream
- Item Dimensions: 6.0 x 4.2 x 2.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Nissan Rogue Heated Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | Krom, S, S Krom, SL, SV | 4 Cyl 2.5 L GAS
$200.50 MSRP: $283.20
You Save: $82.70 (30%)
Product Specifications- Notes: Located in Manifold; B1S1; Calif Emissions; OE Equivalent Design;B1S1; Fed Emissions; OE Equivalent Design
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Mounting Bracket Included: No
- Sensor Type: Heated
- Thread Diameter: 18.000
- Thread Length: 0.38
- Universal Or Specific Fit: Specific
- UPC: 087295256855
- Wire Quantity: 4
- Wiring Harness Length: 14.8
- Part Description: 2011 Nissan Rogue OE Type 4-Wire A/F Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: 19in Length;with California Emission System
- Connector Shape: Square
- Position: Downstream
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604205471
- Wire Harness Length: 19" (475 mm)
- Wrench Size: 0.88" (22 mm)
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | S | 4 Cyl 2.5L
- 2011 Nissan Rogue | S Krom | 4 Cyl 2.5L
- 2011 Nissan Rogue | SV | 4 Cyl 2.5L
Show More Product Specifications- Notes: Calif-ESV; Before Primary Cat; B1S1;Non Calif-ESV; B1S1
- Connector Gender: Male
- Overall Length: 15.87"(403.098 mm)
- Position: Upstream
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620018732
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 12.32"(312.928 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Premium Air Fuel Ratio Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Loc. After Primary Catalyst; Calif; OE Quality Replacement Sensor;Exc Calif; OE Quality Replacement Sensor
- Connector Gender: Male
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Downstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511114197
- Wire Harness Length: 18.5" (469.9 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: w/Calif Emissions; Bank 1 Sensor 3; Located After 2ndary Catalyst;
- Connector Gender: Male
- Connector Shape: Rectangular
- Installation Type: Screw
- Location: After Secondary Catalytic Converter
- Overall Length: 19 11/16"
- Position: Downstream
- Sensor Type: Heated - Zirconia
- Terminal Quantity: 4
- Thread: M18 X 1.5 mm
- UPC: 671607539455
- Wrench Size: 0.88" (22 mm)
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Calif-ESV; Before Primary Cat; Upstream; B1S1;Non Calif-ESV; Upstream; B1S1
- Connector Gender: Male
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Overall Length: 15.87"
- Position: Upstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620095894
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 12.32"
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: B1S2; Fed Emissions; OE MFR: NTK;Located After Primary Catalyst; B1S2; Calif Emissions; OE MFR: NTK
- Installation Type: Screw
- Location: B1S2
- O2 Sensor Configuration: Direct Fit
- Position: Downstream Rear
- Thread Diameter: 0.71" (18 mm)
- UPC: 087295244500
- Wire Harness Length: 18.5" (469.9 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue OE Type Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Calif-ESV; After 2ndary Cat; B1S3
- Connector Gender: Male
- Location: B1S3 Sensor
- Overall Length: 19.8"(502.92 mm)
- Position: Downstream
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620014963
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 16.26"(413.004 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Premium Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Non Calif-ESV; B1S2;Calif-ESV; After Primary Cat; B1S2
- Connector Gender: Male
- Location: B1S2 Sensor
- Overall Length: 19.8"(502.92 mm)
- Position: Downstream
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620015229
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 16.26"(413.004 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Premium Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Calif-ESV; After 2ndary Cat; Downstream; B1S3
- Connector Gender: Male
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Overall Length: 19.8"
- Position: Downstream
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620092817
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 16.26"
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Non Calif-ESV; Downstream; B1S2;Calif-ESV; After Primary Cat; Center; B1S2
- Connector Gender: Male
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Overall Length: 19.8"
- Position: Downstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620094446
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 16.26"
- Wires Quantity: 4 Wire Leads
- Part Description: 2011 Nissan Rogue Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L
Product Specifications- Notes: Located After 2ndary Catalyst; B1S3; Calif Emissions; OE MFR: NTK
- Mounting Type: Threaded
- Sensor Type: Heated
- Thread Diameter: 18.000
- Universal Or Specific Fit: Specific
- UPC: 087295244487
- Wire Quantity: 4
- Wiring Harness Length: 18.5000
- Part Description: 2011 Nissan Rogue OE Type Oxygen Sensor
More Info Vehicle Fitment- 2011 Nissan Rogue | All Trims | 4 Cyl 2.5L