70 products about 2003 Honda CR-V Driveline, Axles & 4WD found
Product Specifications- Notes: Cr-V
- Other Names: Bearing, Shaft Bearings
- Item Dimensions: 3.3 x 3.0 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2003 Honda CR-V Bearing, Half Shaft (Ntn)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, EX-L, LX, SE, Special Edition, Touring | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$41.37 MSRP: $58.45
You Save: $17.08 (30%)
Product Specifications- Notes: 2WD; 4WD; CR-V; Outer
- Location: Driver Side; Passenger Side
- Other Names: Bushings, Knuckle Upper Bushing, Upper Bushing
- Item Dimensions: 1.7 x 1.5 x 1.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2003 Honda CR-V Bush, Rear Arm (Upper)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$27.01 MSRP: $38.17
You Save: $11.16 (30%)
Product Specifications- Notes: W/O ABS; CR-V; W/O Abs; Japan Built
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.6 x 3.6 x 1.7 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44300-S0A-003, 44300-S47-008, 44300-S84-A01
- Part Description: 2003 Honda CR-V Bearing Assembly, Front Hub
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$98.20 MSRP: $138.71
You Save: $40.51 (30%)
Product Specifications- Notes: 2WD; 4WD
- Location: Driver Side; Passenger Side
- Other Names: Trailing Arm Bushing
- Item Dimensions: 2.0 x 1.6 x 1.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 52364-S6M-004
- Part Description: 2003 Honda CR-V Bush, Rear Arm (Lower) (Inner)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$16.05 MSRP: $22.64
You Save: $6.59 (30%)
Product Specifications- Quantity Per Application: 1
- UPC: 826732057378
- Part Description: 2003 Honda CR-V Differential Bearing
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | All Engines
Product Specifications- Notes: BEARING ID / BORE: 1.0001 INCH / 25 MM;CENTERLINE: 0.50 INCH / 13 MM;MOUNT WIDTH: 6.25 INCH / 159 MM;STYLE: ROUND FRAME;w/WINGS;
- Inside Diameter: 1"
- OE Part Number: 40100-S9A-J01
- Shape: Round
- UPC: 081106060693
- Part Description: 2003 Honda CR-V Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: CR-V; Left; 4WD
- Location: Driver Side
- Other Names: Axle Seal
- Item Dimensions: 2.0 x 2.0 x 0.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91203-P6R-003, 91207-PE9-015
- Part Description: 2003 Honda CR-V Oil Seal (35X50X8.5) (Nok)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$11.22 MSRP: $15.84
You Save: $4.62 (30%)
Product Specifications- Notes: Stamped 40100-S9A-J01
- Bracket Material: Steel
- Inside Diameter: 25 mm
- Installation Hardware Included: No
- Installation Instructions Included: No
- Mounting Bracket Included: Yes
- Mounting Hole Quantity: 2
- OE Part Number: 40100S9AJ01
- Support Bearing Type: Housing Mounted Bearing
- UPC: 037495236218
- Part Description: 2003 Honda CR-V OE Solutions Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | All Engines
Product Specifications- Notes: CR-V; Right; 4WD
- Location: Passenger Side
- Other Names: Axle Seal
- Item Dimensions: 3.2 x 3.1 x 0.4 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91202-P6R-003
- Part Description: 2003 Honda CR-V Oil Seal (35X78X8.5) (Nok)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$12.05 MSRP: $17.00
You Save: $4.95 (30%)
Product Specifications- Notes: Repair Kit; Incls Bolts; Only works w/Dorman Driveshaft 936-001;Repair Kit; Only Works w/Dorman Driveshaft 936-001; Incls Bolts
- Bearing Cap Diameter Axis 1: 0.787"
- Bearing Cap Diameter Axis 2: 0.787"
- Bearing Cap Finish: Steel
- Coating Type: Not Applicable
- Color/Finish: Silver
- Greasable: No
- Grease Type: Multi Purpose Bearing Grease
- Grease Zerks Included: No
- Length Between Inside Snap Rings Axis 1 (In): 2.165"
- Length Between Inside Snap Rings Axis 2 (In): 2.165"
- Pre Greased: Yes
- Seal Material: Rubber
- Snap Ring Type: Lip Seals
- Universal Joint Cross Material: Steel
- Universal Joint Type: Only fits Dorman driveshafts 936-001, 936-002, 936-003 and 936-007
- UPC: 019495516873
- Part Description: 2003 Honda CR-V OE Solutions Driveshaft Repair Kit
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | All Engines
Product Specifications- Cone ID: 1.573"
- Cone Length: 0.681"
- Cone Radius: 0.1"
- Cup Length: 0.539"
- Cup Radius: 0.1"
- Outside Diameter: 3.149"
- UPC: 085311286305
- Width: 0.539"
- Part Description: 2003 Honda CR-V Axle Shaft Bearing Kit
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | All Engines
Product Specifications- Notes: Cr-V
- Item Dimensions: 2.2 x 2.3 x 0.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91206-PG2-005
- Part Description: 2003 Honda CR-V Oil Seal (40X56X9) (Nok)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$17.31 MSRP: $24.43
You Save: $7.12 (30%)
Product Specifications- Drive Shaft Diameter (In): 2.5"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: No
- Length: 80.9"
- Material: Steel
- OE Part Number: 40100S9AE01, 40100SCAA01
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic / Manual
- UPC: 019495391784
- Wall Thickness: 0.065"
- Part Description: 2003 Honda CR-V OE Solutions Rear Driveshaft
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | All Engines
Product Specifications- Notes: CR-V; All; 4WD, Auto Trans
- Other Names: Case, Differential Carrier, Viscous Coupler
- Item Dimensions: 20.5 x 8.7 x 8.6 inches
- Item Weight: 17.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 41011-PNZ-325, 41011-PNZ-315, 41011-PNZ-305, 41011-PNZ-306
- Part Description: 2003 Honda CR-V Case Kit, T.C.D.
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX | 4 Cyl 2.4 L GAS
$2191.65 MSRP: $3122.01
You Save: $930.36 (30%)
Product Specifications- Notes: Right
- Cone ID: 1.0630"
- Cone Length: 0.580"
- Cone Radius: 0.140"
- Cup Length: 0.420"
- Cup Radius: 0.050"
- Outer Diameter: 1.980"
- UPC: 085311058773
- Width: 0.560"
- Part Description: 2003 Honda CR-V Front Passenger Side Wheel Bearing
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | All Engines
Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 98-1/2" (2503 mm) Long Driveshaft;Supplied as new
- Greasable: No
- Length: 98.5"
- Length (mm): 2503
- Material: Steel
- Measurement Method: Measurement is taken end of one flange to end of the flange on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2003 Honda CR-V Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 2003 Honda CR-V | All Trims | All Engines
Product Specifications- Notes: 4WD, W/ABS; CR-V; W/ABS; Japan Built
- Location: Driver Side; Passenger Side
- Other Names: Bearing
- Item Dimensions: 2.8 x 2.9 x 1.6 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2003 Honda CR-V Bearing Assembly, Hub (Nsk)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$117.93 MSRP: $166.58
You Save: $48.65 (30%)
Product Specifications- Notes: CR-V; Auto Trans; Auto Trans
- Other Names: Intermed Shaft, Intermediate Shaft
- Item Dimensions: 17.5 x 7.8 x 6.7 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44500-S6M-J00
- Part Description: 2003 Honda CR-V Shaft Assembly, Half (Automatic)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$440.41 MSRP: $627.38
You Save: $186.97 (30%)
Product Specifications- Notes: Cr-V; 4WD
- Other Names: Carrier
- Item Dimensions: 18.6 x 10.6 x 10.3 inches
- Item Weight: 26.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 41010-PNZ-335, 41010-PNZ-325, 41010-PNZ-315, 41010-PNZ-305
- Part Description: 2003 Honda CR-V Carrier Sub-Assembly
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX | 4 Cyl 2.4 L GAS
$2015.19 MSRP: $2870.64
You Save: $855.45 (30%)
Product Specifications- Notes: Cr-V
- Other Names: Bearing Seal, Seal
- Item Dimensions: 2.2 x 2.3 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2003 Honda CR-V Seal, Half Shaft (Outer)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX | 4 Cyl 2.4 L GAS
$9.51 MSRP: $13.41
You Save: $3.90 (30%)
Product Specifications- Notes: CR-V; Manual Trans; Manual Trans
- Other Names: Intermed Shaft, Intermediate Shaft
- Item Dimensions: 19.6 x 7.1 x 7.1 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44500-S6M-N00
- Part Description: 2003 Honda CR-V Shaft Assembly, Half (Mt)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$354.03 MSRP: $504.33
You Save: $150.30 (30%)
Product Specifications- Notes: CR-V; Manual Trans; Manual Trans
- Other Names: Intermed Shaft, Intermediate Shaft
- Item Dimensions: 19.6 x 7.1 x 7.1 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44500-S6M-N00
- Part Description: 2003 Honda CR-V Shaft Assembly, Half (Mt)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$354.03 MSRP: $504.33
You Save: $150.30 (30%)
Product Specifications- Notes: CR-V; Honda Code 6890941;CR-V; Honda Code 7446479; U.K. Built
- Item Dimensions: 87.7 x 10.5 x 6.2 inches
- Item Weight: 27.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 40100-S9A-E01, 40100-S9A-J01
- Part Description: 2003 Honda CR-V Shaft Assembly, Propeller
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$773.35 MSRP: $1101.66
You Save: $328.31 (30%)
Product Specifications- Notes: CR-V; Honda Code 6890941;CR-V; Honda Code 7446479; U.K. Built
- Item Dimensions: 87.7 x 10.5 x 6.2 inches
- Item Weight: 27.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 40100-S9A-E01, 40100-S9A-J01
- Part Description: 2003 Honda CR-V Shaft Assembly, Propeller
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$773.35 MSRP: $1101.66
You Save: $328.31 (30%)
Product Specifications- Notes: CR-V; Left; Auto Trans, W/O ABS;Manual Trans
- Location: Driver Side
- Item Dimensions: 31.4 x 4.8 x 4.3 inches
- Item Weight: 18.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44306-S9E-T00, 44306-SCA-G00
- Part Description: 2003 Honda CR-V Driveshaft Assembly, Driver Side
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$580.30 MSRP: $826.66
You Save: $246.36 (30%)
Product Specifications- Notes: CR-V; Left; Auto Trans, W/O ABS;Manual Trans
- Location: Driver Side
- Item Dimensions: 31.4 x 4.8 x 4.3 inches
- Item Weight: 18.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44306-S9E-T00, 44306-SCA-G00
- Part Description: 2003 Honda CR-V Driveshaft Assembly, Driver Side
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$580.30 MSRP: $826.66
You Save: $246.36 (30%)
Product Specifications- Notes: 2WD; 4WD, W/O ABS; CR-V; W/O Abs; Japan Built
- Location: Passenger Side; Driver Side
- Other Names: Bearing, Wheel Bearing, Wheel Bearings
- Item Dimensions: 4.2 x 3.9 x 3.4 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44300-SR3-008, 44300-SR3-015
- Part Description: 2003 Honda CR-V Bearing Assembly, Front Hub (Ntn Corp.)
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX | 4 Cyl 2.4 L GAS
$112.36 MSRP: $158.72
You Save: $46.36 (30%)
Product Specifications- Notes: CR-V; Right; Auto Trans, W/O ABS;Manual Trans
- Location: Passenger Side
- Item Dimensions: 29.0 x 5.8 x 5.6 inches
- Item Weight: 21.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44305-SCA-G00, 44305-S9E-T00, 44305-S9A-N00RM
- Part Description: 2003 Honda CR-V Driveshaft Assembly, Passenger Side
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$580.30 MSRP: $826.66
You Save: $246.36 (30%)
Product Specifications- Notes: CR-V; Right; Auto Trans, W/O ABS;Manual Trans
- Location: Passenger Side
- Item Dimensions: 29.0 x 5.8 x 5.6 inches
- Item Weight: 21.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44305-SCA-G00, 44305-S9E-T00, 44305-S9A-N00RM
- Part Description: 2003 Honda CR-V Driveshaft Assembly, Passenger Side
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$580.30 MSRP: $826.66
You Save: $246.36 (30%)
Product Specifications- Notes: Auto Trans, W/ABS
- Location: Passenger Side
- Item Dimensions: 28.3 x 5.7 x 5.3 inches
- Item Weight: 16.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44305-SCA-E00, 44305-SCA-A00
- Part Description: 2003 Honda CR-V Driveshaft Assembly, Passenger Side
More Info Vehicle Fitment- 2003 Honda CR-V | EX, LX, SE | 4 Cyl 2.4 L GAS
$565.38 MSRP: $805.40
You Save: $240.02 (30%)