115 products about 2000 Nissan Xterra Driveline, Axles & 4WD found
Product Specifications- Notes: 3.3 Liter
- Other Names: Bearing O-Ring
- Item Dimensions: 5.6 x 4.1 x 0.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Nissan Xterra Seal-O Ring
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 6 Cyl 3.3 L GAS
$7.03 MSRP: $9.58
You Save: $2.55 (27%)
Product Specifications- Notes: Inner, 3.3 Liter; Xterra
- Other Names: Axle Seal, Bearing Oil Seal
- Item Dimensions: 2.6 x 2.6 x 0.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Nissan Xterra Seal-Oil, Rear Axle Shaft
More Info Vehicle Fitment- 2000 Nissan Xterra | Off-Road, PRO-4X, S, SE, X, XE | 6 Cyl 3.3 L GAS, 6 Cyl 4.0 L GAS
$9.72 MSRP: $13.27
You Save: $3.55 (27%)
Product Specifications- Notes: 4WD
- Other Names: Axle Assembly Bearing
- Item Dimensions: 5.3 x 3.1 x 0.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Nissan Xterra Bearing-Needle, Drive Shaft
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
$35.88 MSRP: $49.03
You Save: $13.15 (27%)
Product Specifications- Notes: 3.3 Liter; Xterra
- Other Names: Carrier Gasket, Differential Assembly Gasket
- Item Dimensions: 11.8 x 10.9 x 0.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38320-T3320AS, 38320-T3320, 38320-T3321
- Part Description: 2000 Nissan Xterra Gasket-Cover
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 6 Cyl 3.3 L GAS
$3.00 MSRP: $4.08
You Save: $1.08 (27%)
Product Specifications- Notes: Uni-Fit; Joint Dia 3.5"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.5"
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: 2000 Nissan Xterra OE Solutions Front Inner Cv Joint Boot Kit
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: BEARING ID / BORE: 1.1811 INCH / 30 MM;w/BEARING;CUSHION INSERT ONLY;w/o FRAME;
- Inside Diameter: 1.181"
- OE Part Number: 37521-41L25
- UPC: 081106084743
- Part Description: 2000 Nissan Xterra Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | 6 Cyl 3.3L
- 2000 Nissan Xterra | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: Bearing & Support
- Inside Diameter: 1.181"
- Outside Diameter: 4.316"
- UPC: 085311185486
- Width: 2.135"
- Part Description: 2000 Nissan Xterra Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: 2WD; 4WD; Xterra
- Location: Driver Side; Passenger Side
- Other Names: Bushing, Upper Control Arm Bushing
- Item Dimensions: 2.1 x 2.0 x 2.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Nissan Xterra Bush Assy-Upper Link
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
$27.16 MSRP: $37.12
You Save: $9.96 (27%)
Product Specifications- Notes: Grease Fitting in Cross; Coated for Alum Driveshaft
- Bearing Cap Diameter: 1.063"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286110793
- Part Description: 2000 Nissan Xterra Grade Coated™ Rear U-Joint
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: with 24-1/2" (622 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face
- Greasable: No
- Length: 24.5"
- Length (mm): 622,3
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2000 Nissan Xterra Remanufactured Driveshaft/ Prop Shaft
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Uni-Fit; Joint Dia 3.44"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.44"
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: 2000 Nissan Xterra OE Solutions Front Outer Cv Joint Boot Kit
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- ABS Ring Included: No
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 22 1/4"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 2000 Nissan Xterra Remanufactured CV Axle Assembly
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: w/Fuji Univance TX10A Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2000 Nissan Xterra Driveshaft Center Support Bearing
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Quantity Per Application: 1
- UPC: 826732057378
- Part Description: 2000 Nissan Xterra Differential Bearing
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2000 Nissan Xterra Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: 4WD
- Location: Driver Side
- Other Names: Axle Seal, Flange Oil Seal
- Item Dimensions: 2.3 x 2.2 x 0.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 38342-P9000
- Part Description: 2000 Nissan Xterra Seal-Oil
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
$13.41 MSRP: $18.30
You Save: $4.89 (27%)
Product Specifications- Notes: Centric Premium Oil & Grease Seal
- UPC: 805890573562
- Part Description: 2000 Nissan Xterra Premium™ Axle Shaft Seal
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | 4 Cyl 2.4L
Product Specifications- Notes: 2WD; 4WD; Xterra; Inner
- Location: Driver Side; Passenger Side
- Other Names: Front Wheel Bearing, Wheel Bearing
- Item Dimensions: 3.5 x 3.5 x 0.9 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Nissan Xterra Bearing Assy-Front Wheel
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
$72.84 MSRP: $99.52
You Save: $26.68 (27%)
Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2000 Nissan Xterra Grade Performance™ Rear U-Joint
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: R200A Front Axle:;R180 Axle;H233BS Axle:;H190B Axle:;C200B Axle:
- Cone ID: 1.378"
- Cone Length: 1.220"
- Cone Radius: 0.078"
- Cup Length: 0.984"
- Cup Radius: 0.059"
- Outside Diameter: 3.150"
- UPC: 085311070898
- Width: 1.289"
- Part Description: 2000 Nissan Xterra Front Axle Shaft Bearing Kit
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | 4 Cyl 2.4L
- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: 4WD
- Other Names: Axle Bearing Inner Seal
- Item Dimensions: 3.6 x 3.6 x 1.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 40227-8B500
- Part Description: 2000 Nissan Xterra Seal-Oil, Inner Drive Shaft
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
$18.99 MSRP: $25.93
You Save: $6.94 (27%)
Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2000 Nissan Xterra Grade Standard U-Joint
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: R180 Axle
- Cone ID: 0.984"
- Cone Length: 0.944"
- Cone Radius: 0.059"
- Cup Length: 0.787"
- Cup Radius: 0.059"
- Outside Diameter: 2.441"
- UPC: 085311070874
- Width: 0.994"
- Part Description: 2000 Nissan Xterra Rear Outer Axle Shaft Bearing Kit
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Outer, 3.3 Liter
- Other Names: Axle Seal, Bearing Oil Seal
- Item Dimensions: 3.3 x 3.3 x 0.5 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 43232-42G00
- Part Description: 2000 Nissan Xterra Seal-Oil
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 6 Cyl 3.3 L GAS
$12.00 MSRP: $16.38
You Save: $4.38 (27%)
Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 2000 Nissan Xterra Spicer 1310 Series Grade Standard U-Joint
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: 2WD; 4WD; Xterra; Outer
- Location: Driver Side; Passenger Side
- Other Names: Front Wheel Bearing, Wheel Bearing
- Item Dimensions: 2.8 x 2.8 x 0.8 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Nissan Xterra Bearing ASY Out
More Info Vehicle Fitment- 2000 Nissan Xterra | SE, XE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
$64.30 MSRP: $87.85
You Save: $23.55 (27%)
Product Specifications- Notes: H190B Axle:
- Cone ID: 1.1810"
- Cone Length: 0.7480"
- Cone Radius: 0.0591"
- Cup Length: 0.6299"
- Cup Radius: 0.0591"
- Outer Diameter: 2.8350"
- UPC: 085311070782
- Width: 0.8170"
- Part Description: 2000 Nissan Xterra Front Passenger Side Outer Wheel Bearing
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Notes: Std Grade; Grease Fitting in Cross; Incl Inside & Outside Lock Rings
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Grooved
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.66
- Length Axis 2: 2.66
- Lock Ring Location: External, Internal
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel
- Mounting Hardware Included: Yes
- Style: 4 Grooved Round Bearings
- UPC: 826732926728
- Weight (Gross Pounds): 1.30
- Width (Inch): 3.50
- Part Description: 2000 Nissan Xterra Grade Standard U-Joint
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Cup Length: 0.593"
- Cup Radius: 0.030"
- Outside Diameter: 3.063"
- UPC: 085311057219
- Width: 0.781"
- Part Description: 2000 Nissan Xterra Rear Axle Shaft Bearing Race
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | All Engines
Product Specifications- Cone ID: 1.575"
- Cone Length: 0.708"
- Cone Radius: 0.059"
- Cup Length: 0.629"
- Cup Radius: 0.059"
- Outside Diameter: 3.150"
- UPC: 085311070737
- Width: 0.778"
- Part Description: 2000 Nissan Xterra Rear Axle Shaft Bearing Kit
More Info Vehicle Fitment- 2000 Nissan Xterra | All Trims | 4 Cyl 2.4L
- 2000 Nissan Xterra | All Trims | 6 Cyl 3.3L