33 products about 1998 Jeep Wrangler Wheel Hubs, Bearings, Seals & Components found
Product Specifications- Notes: Cast Iron Rotor;Cast Rotor
- Bolt Pattern_New: 5
- Inside Diameter: 1.15"
- Lug Pattern: 5
- Material: Steel
- Mounting Flange Material: Steel
- Outside Diameter: 5.98"
- Package Contents: Hub Bearing
- UPC: 885484605305
- Part Description: 1998 Jeep Wrangler OE Solutions Front Driver Side Wheel Bearing And Hub Assembly
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Bolt Circle Diameter A: 4.50"
- Bolt Circle Diameter B: 4.750"
- Bolt Hole Size: M12X1.75
- Bolt Size: 1/2OUNF-2A"
- Flange Diameter: 6.0430"
- Flange Offset: 2.1330"
- Inner Diameter: 1.1390"
- Number of Bolts: 5
- Number of Holes: 3
- Number of Splines: 27
- Sensor Ring: No
- UPC: 085311153454
- Wheel Pilot Diameter: 2.8120"
- Part Description: 1998 Jeep Wrangler Front Driver Side Wheel Bearing And Hub Assembly
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: FAG Global# 559347
- Hub Flange Mount Hole Quantity: 3 EA
- Number of Hub Bolts: 5 EA
- UPC: 670774143915
- Part Description: 1998 Jeep Wrangler Front Wheel Bearing and Hub Assembly
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Composite Rotor
- Inside Diameter: 1.4"
- Lug Pattern: 5
- Mounting Flange Material: Steel
- Outside Diameter: 6.06"
- Package Contents: Hub Bearing
- UPC: 885484602502
- Part Description: 1998 Jeep Wrangler OE Solutions Front Passenger Side Wheel Bearing And Hub Assembly
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone; w/Spicer 44-1 HD Axle
- Bore: 1.5625"
- Cylindrical inner Race: Non-separable"
- Outer Diameter: 2.875"
- Type: NS
- Width: 0.7636"
- Part Description: 1998 Jeep Wrangler Rear Passenger Side Inner Wheel Bearing and Race Set
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Inner Diameter: 1.3125"
- Outer Diameter: 1.6250"
- UPC: 085311050685
- Width: 0.6250"
- Part Description: 1998 Jeep Wrangler Wheel Bearing Kit
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Wheel Hub Assy; Axle Nut Torque Spec: 175 ft-lbs / 237Nm
- Flange Diameter (Inch): 6.045
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.94
- Material: Steel
- Product Condition: New
- Spline Quantity: 27
- Stud Quantity: 5
- UPC: 029175925437
- Wiring Harness Included: No
- Part Description: 1998 Jeep Wrangler WHEEL BEARING AND HUB ASSEMBLY
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | 4 Cyl 2.5L
- 1998 Jeep Wrangler | All Trims | 6 Cyl 4.0L
Product Specifications- Material: Steel
- Package Contents: 3 Bolts
- UPC: 885484610811
- Part Description: 1998 Jeep Wrangler OE Solutions Front Wheel Hub Bolt
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Spicer 44 Axle
- Bore: 2.868"
- Outer Diameter: 2.893"
- UPC: 826732189673
- Part Description: 1998 Jeep Wrangler Rear Outer Wheel Seal
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: w/New Process 231J Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 1998 Jeep Wrangler Front Outer Transfer Case Output Shaft Bearing
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Spicer 35 Axle
- Bore: 2.282"
- Boretite: No
- Outer Diameter: 2.288"
- Shaft: 1.40"
- UPC: 085311279666
- Width: 0.547"
- Part Description: 1998 Jeep Wrangler Rear Wheel Seal
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: w/Spicer 44-1HD Axle; w/8.5in Ring Gear
- Part Description: 1998 Jeep Wrangler Front Passenger Side Inner Wheel Bearing
Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- B1 Width: 0.44"
- Boretite: No
- Shaft: 2.244"
- Shaft From: 2.205"
- Shaft To: 2.323"
- UPC: 085311024709
- Width: 0.469"
- Part Description: 1998 Jeep Wrangler Front Inner V Ring Wheel Seal
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: w/Spicer 35C Axle; w/7.59in Ring Gear;w/Spicer 30-AF Axle; w/7.125in Ring Gear
- Part Description: 1998 Jeep Wrangler Front Transfer Case Output Shaft Race
Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Std Replacement Bearing; w/Spicer 35C Axle
- Bore: 1.4016"
- Cylindrical inner Race: Non-separable
- Outer Diameter: 2.252"
- Type: NS
- Width: 0.698"
- Part Description: 1998 Jeep Wrangler Rear Passenger Side Standard Replacement Wheel Bearing
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Bore: 1.625"
- Boretite: No
- Rod: 1.313"
- UPC: 085311079006
- Width: 0.156"
- Part Description: 1998 Jeep Wrangler Front Outer Block Vee Wheel Seal
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 1.0 x 1.5 x 1.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Nut-HEXAGON FLANGE Lock
More Info Vehicle Fitment- 1998 Jeep Wrangler | 65th Anniversary Edition, Rubicon, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
$5.90 MSRP: $8.60
You Save: $2.70 (32%)
Product Specifications- Notes: 2.5 Liter; 4.0 Liter, 1997-02
- Location: Driver Side; Passenger Side
- Item Dimensions: 0.8 x 1.3 x 1.2 inches
- Item Weight: 0.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 34202309, 6502835, 6503711, 6502697
- Part Description: 1998 Jeep Wrangler Nut-HEXAGON FLANGE Lock
More Info Vehicle Fitment- 1998 Jeep Wrangler | 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Sahara, SE, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X | 4 Cyl 2.0 L ELECTRIC/GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L ELECTRIC/GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 6.4 L GAS
$1.65 MSRP: $2.50
You Save: $0.85 (34%)
Product Specifications- Notes: Jeep; Chrysler Axle
- Item Dimensions: 0.8 x 3.3 x 3.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52070427AA
- Part Description: 1998 Jeep Wrangler Seal-Axle Drive Shaft
More Info Vehicle Fitment- 1998 Jeep Wrangler | Base, Islander, Renegade, Rio Grande, S, Sahara, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
$28.66 MSRP: $42.95
You Save: $14.29 (34%)
Product Specifications- Other Names: Axle Shaft Bolt, Stud, Wheel Stud
- Item Dimensions: 1.0 x 1.1 x 2.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 53007463
- Part Description: 1998 Jeep Wrangler Hub And Rotor Bolt
More Info Vehicle Fitment- 1998 Jeep Wrangler | Sahara, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
$7.36 MSRP: $10.95
You Save: $3.59 (33%)
Product Specifications- Notes: Dana 35; Tj Series; Dana Model 35 Axle
- Location: Driver Side; Passenger Side
- Other Names: Axle Bearing, Bearing
- Item Dimensions: 0.7 x 2.7 x 2.6 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Bearing-Axle Shaft
More Info Vehicle Fitment- 1998 Jeep Wrangler | 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
$48.37 MSRP: $72.25
You Save: $23.88 (34%)
Product Specifications- Notes: Dana 35; Jeep; Dana Model 35 Axle
- Location: Driver Side; Passenger Side
- Other Names: Axle Seal, Bearing Seal, Outer Seal, Seal
- Item Dimensions: 0.5 x 1.4 x 1.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Seal-Axle Drive Shaft
More Info Vehicle Fitment- 1998 Jeep Wrangler | 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
$27.17 MSRP: $40.35
You Save: $13.18 (33%)
Product Specifications- UPC: 805890563297
- Part Description: 1998 Jeep Wrangler Premium™ Wheel Bearing And Hub Assembly
Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Jeep
- Location: Driver Side; Passenger Side
- Other Names: Axle Seal, Inner Seal, Seal, Slinger, Slinger Seal
- Item Dimensions: 0.9 x 2.6 x 2.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Seal-Axle Drive Shaft
More Info Vehicle Fitment- 1998 Jeep Wrangler | 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
Product Specifications- Notes: Dana 44-1HD RA
- UPC: 805890544135
- Part Description: 1998 Jeep Wrangler Premium™ Rear Passenger Side Wheel Bearing and Race Set
More Info Vehicle Fitment- 1998 Jeep Wrangler | All Trims | All Engines
Product Specifications- Notes: Dana 44; Jeep; Dana Model 44 Axle
- Location: Driver Side; Passenger Side
- Other Names: Axle Seal, Bearing Seal, Outer Seal
- Item Dimensions: 0.7 x 3.5 x 3.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Seal-Axle Drive Shaft
More Info Vehicle Fitment- 1998 Jeep Wrangler | 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Outer Shaft Nut, Retainer Nut, Spindle Nut
- Item Dimensions: 1.9 x 1.1 x 0.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Nut-Hexagon
More Info Vehicle Fitment- 1998 Jeep Wrangler | 65th Anniversary Edition, Rubicon, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Other Names: Axle Shaft Stud, Stud
- Item Dimensions: 2.1 x 1.1 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Stud Hub
More Info Vehicle Fitment- 1998 Jeep Wrangler | Sahara, SE, Sport, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
Product Specifications- Notes: Jeep
- Location: Driver Side; Passenger Side
- Item Dimensions: 12.2 x 18.4 x 6.8 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Front Wheel Hub Bearing Assembly Compatible
More Info Vehicle Fitment- 1998 Jeep Wrangler | Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
Product Specifications- Notes: Jeep
- Location: Driver Side; Passenger Side
- Item Dimensions: 12.2 x 18.4 x 6.8 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Jeep Wrangler Front Wheel Hub Bearing Assembly Compatible
More Info Vehicle Fitment- 1998 Jeep Wrangler | Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS