76 products about 1992 Acura Legend A/C & Heating found
Product Specifications- Clutch Maximum Diameter: 140.0 mm
- Compressor Mount Hole Quantity: 4
- Mounting Type: Bolt Tangent
- OE Part Number: 38810PY3023, 38800PY30032, 06388PY3505RM, 38810PY3A01
- Pulley Belt Type: Serpentine
- Refrigerant Type: R12
- UPC: 042511165762
- Part Description: 1992 Acura Legend A/C Compressor with Clutch
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Notes: Cut to Length, 8";Cut to Length, 6";Cut to Length, 5";Cut to Length, 15"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.25"
- OE Part Number: 34580
- UPC: 072053133219
- Weight Per Length: 6 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 1992 Acura Legend Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Notes: DENSO is the OE supplier for this vehicle; OE-specified O-rings Incld.
- OE Part Number: 80220SP0013, 8851522200, 8851522070
- Type: Angle valve
- UPC: 042511075030
- Part Description: 1992 Acura Legend A/C Expansion Valve
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Notes: w/ 10PA20C Compressor; New w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.500
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10PA20C
- Discharge Port Type: Pad Mount
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- O-Ring C Number/Desc: Not Required
- O-Ring C Quantity: NR
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 139.700
- Pulley Groove Quantity: 5
- Pulley Lip Diameter: 5.500
- Pulley Outside Diameter: 5.500
- Pulley Ridge Diameter: 5.500
- Refrigerant Type: R134a
- Suction Port Type: Pad Mount
- Terminal Type: Spade
- UPC: 096361783287
- Part Description: 1992 Acura Legend A C Compressor With Clutch
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Centerline Length (in): 19"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053321227
- Part Description: 1992 Acura Legend Hvac Heater Molded Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Other Names: Discharge Hose
- Item Dimensions: 23.2 x 3.6 x 3.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Acura Legend Hose, Discharge
More Info Vehicle Fitment- 1992 Acura Legend | Base, L, LS | 6 Cyl 3.2 L GAS
$174.21 MSRP: $246.07
You Save: $71.86 (30%)
Product Specifications- Other Names: Discharge Hose
- Item Dimensions: 23.2 x 3.6 x 3.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Acura Legend Hose, Discharge
More Info Vehicle Fitment- 1992 Acura Legend | Base, L, LS | 6 Cyl 3.2 L GAS
$174.21 MSRP: $246.07
You Save: $71.86 (30%)
Product Specifications- Notes: Plate Fin
- Core Depth Fraction: 3-3/8; 3-9/16
- Core Depth MM: 85.725; 90.487
- Core Height Fraction: 11-1/4; 9-1/2
- Core Height MM: 241.300; 285.750
- Core Width Fraction: 10-5/8; 9-1/4
- Core Width MM: 235.000; 269.875
- Depth: 3.375; 3.563
- Height: 11.250; 9.500
- Inlet Fitting Type: Block Fitting
- Material: Aluminum
- O-Ring A Number/Desc: [24682] / Green O-Ring
- O-Ring A Quantity: 2
- Outlet Fitting Type: Block Fitting
- UPC: 096361547216
- Width: 10.625; 9.250
- Part Description: 1992 Acura Legend A C Evaporator Core
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 3/8
- End 2 Inside Diameter: 3/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 038244597659
- Part Description: 1992 Acura Legend Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.9"
- Inside Diameter 1 (in): 0.38"
- Number of Branches: 0
- UPC: 072053178265
- Part Description: 1992 Acura Legend Hvac Heater Molded Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Notes: w/o Wheel
- Cage Wheel Included: w/o Wheel
- Connector Gender: None
- Connector qty: None
- Flanged End: No
- Material: Metal
- Motor Diameter: 2.750
- Motor Length: 3.6875
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: Connector Not Included
- O.E. Replacement: Yes
- Rotation: CW
- Shaft Diameter: 0.250
- Shaft Length: 1.875
- Shaft Shape: D-Shaped
- Shaft Type: D-Shaped
- Style: Double Shaft
- Terminal Type: 2 Lead Wires
- UPC: 096361757073
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: Yes
- Part Description: 1992 Acura Legend Hvac Blower Motor Without Wheel
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Bypass: No
- Hose Connector Quantity: 2 Connectors
- Material: Plastic
- Mounting Hardware Included: no
- O.E. Replacement: Yes
- Opening B IN: 0.625
- Opening B MM: 15.875
- Opening IN: 0.625
- Opening MM: 15.875
- Operation Type: Cable Operated
- Style: Non-Bypass
- UPC: 096361746206
- Part Description: 1992 Acura Legend Hvac Heater Control Valve
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- OE Part Number: 42569
- UPC: 072053178029
- Part Description: 1992 Acura Legend Engine Coolant Molded Bypass Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Notes: Discharge Line
- Bracket: w/o Bracket
- Component Type: Discharge Line
- Fittings Included: Included
- Gasket or Seal Included: Included
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 2
- O.E. Replacement: Yes
- Refrigerant Type: R12, R134a
- Service Port: w/o Service Port
- Suction End Type: P-Nut Fitting
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- UPC: 096361568563
- Part Description: 1992 Acura Legend A C Discharge Line Hose Assembly
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Angle: 90
- Arm Length 1 (in): 4"
- Arm Length 2 (in): 12"
- Centerline Length (in): 16"
- Inside Diameter 1 (in): 0.625"
- UPC: 072053062014
- Part Description: 1992 Acura Legend 90 Degree Hvac Heater Molded Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Notes: Suction Line
- Bracket: w/o Bracket
- Component Type: Suction Line
- End 1 Type: P-Nut Fitting
- End 2 Type: P-Nut Fitting
- Fittings Included: Included
- Gasket or Seal Included: Included
- Material: Aluminum / Rubber
- Muffler: w/o Muffler
- O-Ring A Number/Desc: [24678] / Green O-Ring
- O-Ring A Quantity: 2
- O.E. Replacement: Yes
- Refrigerant Type: R12
- Service Port: w/o Service Port
- Suction End Type: P-Nut Fitting
- Switch Included: Not Included
- Switch Service Port: w/o Switch Port
- System Pressure: Low Pressure
- UPC: 096361568587
- Part Description: 1992 Acura Legend A C Suction Line Hose Assembly
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Connector Shape: Oval
- Gender: Male
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 2
- UPC: 096361028005
- Part Description: 1992 Acura Legend Ambient Air Temperature Sensor Connector
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 13.8"
- Inside Diameter 1 (in): 0.31"
- Number of Branches: 0
- UPC: 072053412093
- Part Description: 1992 Acura Legend Hvac Heater Molded Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Color: Brass
- Refrigerant Type: R134A
- Super Heat: 4.0
- UPC: 096361391307
- Part Description: 1992 Acura Legend A C Expansion Valve
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 8.7"
- Inside Diameter 1 (in): 0.38"
- Number of Branches: 0
- UPC: 072053178272
- Part Description: 1992 Acura Legend Hvac Heater Molded Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | 6 Cyl 3.2L
Product Specifications- Notes: Fan Motor Relay Connector;Compressor Relay Connector
- Connector Shape: Rectangle
- Gender: Male
- Style: Harness Connector
- Terminal Gender: Female
- Terminal Quantity: 4
- UPC: 096361372573
- Part Description: 1992 Acura Legend A C Clutch Control Relay Harness Connector
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Body Diameter: 2.250
- Body Length: 6.000
- Bracket: w/o Bracket
- Connector B Type: Pad Mount
- Connector Type: Pad Mount
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 57.150
- Fuse Plug: No
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Pad Mount
- Inlet Filter Fitting Type: Pad Mount
- Inlet Fitting Diameter: 0.500
- Inlet Fitting Type: Pad Mount
- Inlet Fraction: 1/2
- Length MM: 152.400
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Moisture Indicator Window: No
- Mounting Bracket Included: Hardware not included
- New or Reman: New
- O-Ring A Number/Desc: [24646] / Green Round O/Ring
- Outlet Fitting Type: Pad Mount
- Outlet Fraction: 1/2
- Outlet IN: .342
- Outlet MM: 12.26
- Overall Depth IN: 6.000
- Overall Depth MM: 152.400
- P. R. V.: No
- Pad Mount: w/ Pad Mount
- Service Port: w/o Service Port
- Sight Glass: No
- Stud: No
- Style: Aluminum Filter Drier w/ Pad Mount
- Switch Port: w/o Switch Port
- UPC: 096361332379
- Part Description: 1992 Acura Legend A C Receiver Drier
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings
- Style: O-Ring & Gasket Kit
- UPC: 096361267459
- Part Description: 1992 Acura Legend A C System O Ring And Gasket Kit
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Caps and Valve Core Seal Kit; w/ R12 or R134a Retrofit System
- Cap Color: Red, Blue, Black
- Cap Inside Diameter: Specific
- Cap Material: Plastic
- Material: Aluminum
- Refrigerant Type: R12, R134a
- Style: Cap & Valve Kit
- UPC: 096361267770
- Valve Core Material: Specific
- Part Description: 1992 Acura Legend A C System Valve Core And Cap Kit
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Other Names: Fan Motor, Motor
- Item Dimensions: 5.6 x 5.4 x 5.2 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Acura Legend Motor, Cooling Fan
More Info Vehicle Fitment- 1992 Acura Legend | Base, GS, L, LS, SE | 6 Cyl 3.2 L GAS
$313.67 MSRP: $447.99
You Save: $134.32 (30%)
Product Specifications- Other Names: Fan Motor, Motor
- Item Dimensions: 5.6 x 5.4 x 5.2 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Acura Legend Motor, Cooling Fan
More Info Vehicle Fitment- 1992 Acura Legend | Base, GS, L, LS, SE | 6 Cyl 3.2 L GAS
$313.67 MSRP: $447.99
You Save: $134.32 (30%)
Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 2 Inside Diameter: 5/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 038244597512
- Part Description: 1992 Acura Legend Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/16
- End 1 Outside Diameter: 5/8
- End 2 Inside Diameter: 5/16
- End 2 Outside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8 1/4
- UPC: 036687875891
- Part Description: 1992 Acura Legend Molded Heater Hose
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: New Part
- Color: Gray
- Comp Open/Closed: Open
- Connector Gender: Male
- Connector Shape: Oval; Rectangle
- Fan Open/Closed: Closed
- Fitting Gender: Male
- Fitting Thread Size: 3/8" x 24
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Steel
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mounted
- Number of Terminals: 4
- Operate Psi High Off: 380
- Operate Psi High On: 280
- Operate Psi Low Off: 33
- Operate Psi Low On: 37
- Operate Psi Med Off: 140
- Operate Psi Med On: 180
- Style: Pressure
- Terminal Type: Pin
- UPC: 096361209480
- Voltage: 12
- Weather Pack: Yes
- Part Description: 1992 Acura Legend New A C Trinary Switch
More Info Vehicle Fitment- 1992 Acura Legend | All Trims | All Engines
Product Specifications- Notes: Automatic; Legend; W/Auto AC
- Other Names: Temperature Control
- Item Dimensions: 11.1 x 9.0 x 6.4 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 79600-SP0-A43, 79600-SP0-A42, 79600-SP0-A41
- Part Description: 1992 Acura Legend Control Assembly, Automatic Air Conditioner
More Info Vehicle Fitment- 1992 Acura Legend | Base, GS, L, LS, SE | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS