< Back ×
My Vehicle Change Vehicle
1988 Isuzu I-Mark
Delphi® Electric Fuel Pump for 1988 Isuzu I-Mark
PartNumber: FE0157Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 6
- Flow Rating: 50 gph
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: External
- Item Grade: Standard Replacement
- Maximum Pressure: 73.0 PSI
- Outlet Outside Diameter: 0.313''
- Outlet Type: Hose
- Pump Type: Electric
- Strainer Included: Yes
- System Pressure: 44 psi
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 689604034255
- Voltage: 12.0 VDC
- Wiring Harness Included: Yes
- Part Description: 1988 Isuzu I-Mark Electric Fuel Pump
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
$61.40
Gates® Pre Release Locking Fuel Tank Cap for 1988 Isuzu I-Mark
PartNumber: 31734Product Specifications- Cam Type: Threaded
- Cap Depth: 2.38"
- Locking: Yes
- Neck Diameter: 1.77"
- Shell Diameter: 2.75"
- Type: Pre-Release Locking Fuel Cap
- UPC: 072053416091
- Venting: Emission Control
- Part Description: 1988 Isuzu I-Mark Pre Release Locking Fuel Tank Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
$18.69
Autobest® In Tank Electric Fuel Pump for 1988 Isuzu I-Mark
PartNumber: F2233Product Specifications- Notes: Strainer required to validate the warranty: F235S
- Average Current Draw(A): 6
- Average Flow Rating(GPH): 100
- Country of Orign: China
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: FKM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 116
- Minimum Pump Pressure (PSI): 72.5
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 0.346
- Outlet Type: Hose
- Product Height (in): 1.99
- Product Length (in): 4.94
- Product Width (in): 1.99
- Pump Type: Turbine
- Regulator Included: No
- Strainer Included: No
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Thread
- UPC: 00072845122339
- Voltage: 12V
- Weight (lbs): 1.34
- Wire Harness Included: No
- Part Description: 1988 Isuzu I-Mark In Tank Electric Fuel Pump
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
$24.15
Delphi® Fuel Pump Strainer for 1988 Isuzu I-Mark
PartNumber: FS0088Product Specifications- Notes: with Electric Fuel Pump;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Item Grade: Standard Replacement
- Micron Rating: 60
- Strainer Material: Polyester
- UPC: 689604062685
- Part Description: 1988 Isuzu I-Mark Fuel Pump Strainer
Vehicle Fitment- 1988 Isuzu I-Mark | S | 4 Cyl 1.5L
$22.83
Gates® Locking Fuel Tank Cap for 1988 Isuzu I-Mark
PartNumber: 31778Product Specifications- Cam Type: Threaded
- Cap Depth: 2.61"
- Locking: Yes
- Neck Diameter: 1.77"
- Shell Diameter: 2.91"
- Type: Regular Fuel Cap
- UPC: 072053021455
- Venting: Emission Control
- Part Description: 1988 Isuzu I-Mark Locking Fuel Tank Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
$13.76
Gates® Replacement Non Locking Fuel Tank Cap for 1988 Isuzu I-Mark
PartNumber: 31748Product Specifications- Cam Type: Threaded
- Cap Depth: 2.05"
- Locking: No
- Neck Diameter: 1.77"
- Shell Diameter: 2.78"
- Type: OE Equivalent Fuel Cap
- UPC: 072053021325
- Venting: Emission Control
- Part Description: 1988 Isuzu I-Mark Replacement Non Locking Fuel Tank Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
$6.27
Walker Products® Fuel Injector Seal Kit for 1988 Isuzu I-Mark
PartNumber: 17106Product Specifications- Notes: For Pintle Style Injectors
- UPC: 724620072024
- Part Description: 1988 Isuzu I-Mark Fuel Injector Seal Kit
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
$2.60
Gates® Pre Release Non Locking Fuel Tank Cap for 1988 Isuzu I-Mark
PartNumber: 31615Product Specifications- Cam Type: Threaded
- Cap Depth: 2.14"
- Locking: No
- Neck Diameter: 1.77"
- Shell Diameter: 2.81"
- Type: Pre-Release Fuel Cap
- UPC: 072053107760
- Venting: Emission Control
- Part Description: 1988 Isuzu I-Mark Pre Release Non Locking Fuel Tank Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
$9.10
Denso® Fuel Pump and Strainer Set for 1988 Isuzu I-Mark
PartNumber: 950-0150Product Specifications- Notes: DENSO Manufactured OE/ OES Service Part Replacement Fuel Pump & Strainer Kit
- Fuel Pump Type: Electrical
- Gaskets Included: No
- Internet Product Code (IPC): 2637AE85CB3
- Item Grade: Premium Replacement
- Item has MSDS (SDS): Y
- MFG Brand Name: DENSO Auto Parts
- MFG Model # (Series): 950-0150
- MFG Name: DENSO
- Package Contents: Fuel Pump Kit
- Pump Placement: In Tank
- Strainer Fitting Diameter: 0.43
- Strainer Length: 58.0
- Strainer Width: 55.00
- Supplier Company Name: DENSO
- UPC: 042511073500
- Part Description: 1988 Isuzu I-Mark Fuel Pump and Strainer Set
Vehicle Fitment- 1988 Isuzu I-Mark | S | 4 Cyl 1.5L
Airtex® Mechanical Fuel Pump for 1988 Isuzu I-Mark
PartNumber: 1389Product Specifications- Gasket or Seal Included: Yes
- Inlet Attachment: Tube
- Inlet Size: 5/16
- Inlet Type: HOSE BEAD
- Internal or External: External
- Internet Product Code (IPC): 82B1CF0D2FE
- Item Grade: OEM Standard
- Item has MSDS (SDS): No
- Maximum Pressure (psi): 5.5
- MFG Brand Name: Airtex Products
- MFG Model # (Series): 1389
- Minimum Free Flow Rate (gph): 15 GPH @ 1800 RPM
- Minimum Pressure (psi): 4
- Outlet Attachment: Tube
- Outlet Size: 1/4 TUBE
- Outlet Type: HOSE BEAD
- Package Contents: PUMP & KIT
- Package Quantity: 1
- Pump Type: Mechanical
- Supplier Company Name: Airtex Products
- UPC: 080044092087
- Wiring Harness Included: No
- Part Description: 1988 Isuzu I-Mark Mechanical Fuel Pump
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
WIX® Complete In Line Fuel Filter for 1988 Isuzu I-Mark
PartNumber: 33089Product Specifications- Class: W
- Duty Type: LD
- Height: 2.106''
- Inlet: 5/16''
- Inner Diameter Top: Closed
- MediaType: Cellulose
- Micron: 5.00 Micron
- Outer Diameter Bottom: 1.712''
- Outer Diameter Top: 2.047''
- Outlet: 5/16''
- Style: Fuel (Complete In-Line) Filter
- UPC: 765809330894
- Part Description: 1988 Isuzu I-Mark Complete In Line Fuel Filter
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Hastings® In-Line Fuel Filter for 1988 Isuzu I-Mark
PartNumber: GF124Product Specifications- Pallet Layer Quantity: 384
- Part Description: 1988 Isuzu I-Mark In-Line Fuel Filter
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
STANT® Fuel Tank Cap for 1988 Isuzu I-Mark
PartNumber: 10504Product Specifications- Notes: Color Black; Part Attributes W/ Threaded Filler Neck; Part Replacement Replaces 48349
- Cam Type: Threaded
- Cap Depth: 2.48"
- Neck Diameter: 1.77"
- Shell Diameter: 2.91"
- UPC: 033342062283
- Venting: Emission Control
- Part Description: 1988 Isuzu I-Mark Fuel Tank Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® Electric Fuel Pump for 1988 Isuzu I-Mark
PartNumber: E8016SProduct Specifications- Notes: Universal Electric Pump Replaces Mechanical Pump;with 3/8 Inch Hose Inlet
- Fuel Pump Flow Rating: 15
- Fuel Pump Inlet Type: Hose Barb
- Fuel Sending Unit Included: No
- Fuel Type: Diesel
- Gasket or Seal Included: Yes
- Inlet Attachment: Inlet-Pipe Thread
- Inlet Count: 1
- Inlet Outside Diameter: 3/8
- Inlet Size: Inlet-1/8
- Inlet Type: Hose Barb
- Internal or External: External
- Internet Product Code (IPC): 5750A8127C7
- Item Grade: OEM Standard Part
- Item has MSDS (SDS): No
- Length (Inch): 112.0
- Maximum Free Flow Rate (gph): 30
- Maximum Pressure (psi): 4.5
- MFG Brand Name: Airtex Products
- MFG Model # (Series): E8016S
- Minimum Free Flow Rate (gph): 30
- Minimum Pressure (psi): 2.5
- Mounting Hardware Included: Yes
- Muffler Outlet Diameter (in): 3/8
- Negative Ground: Yes
- Operating Pressure: 1
- Outlet Attachment: Outlet-Hose Barb
- Outlet Count: 1
- Outlet Quantity: 1
- Outlet Size: Outlet - 1/8
- Outlet Type: Hose Barb
- Package Contents: Fuel Pump Assembly
- Pump Design: Solenoid
- Pump Type: Electric
- Regulator Included: No
- Seal And Lock Ring Included: No
- Static Pressure Rating: 3.5-5.5
- Strainer Included: No
- Supplier Company Name: Airtex Products
- Terminal Type: Lead Wire
- Universal Or Specific Fit: Universal
- UPC: 080044089940
- Voltage [V]: 12V
- Wire Quantity: 2
- Wiring Harness Included: No
- Part Description: 1988 Isuzu I-Mark Electric Fuel Pump
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Autobest® Fuel Pump Strainer for 1988 Isuzu I-Mark
PartNumber: F235SProduct Specifications- Country of Orign: China
- Product Height (in): 1.6
- Product Length (in): 7
- Product Width (in): 2
- UPC: 00072845102355
- Weight (lbs): 0.2
- Part Description: 1988 Isuzu I-Mark Fuel Pump Strainer
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Hella® Fuel Pump for 1988 Isuzu I-Mark
PartNumber: H75014191Product Specifications- Notes: Discontinued; 12V; 43.5PSI; 42GPH HI; IN-TANK
- UPC: 760687050551
- Part Description: 1988 Isuzu I-Mark Fuel Pump
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
STANT® Black Fuel Cap Tester Adapter for 1988 Isuzu I-Mark
PartNumber: 12410Product Specifications- Notes: Threaded; Threaded Adapter Connected to Tester
- Cam Type: Threaded
- Color: Black
- UPC: 033342062443
- Part Description: 1988 Isuzu I-Mark Black Fuel Cap Tester Adapter
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
STANT® Fuel Tank Cap for 1988 Isuzu I-Mark
PartNumber: 10834Product Specifications- Notes: Color Black; Part Attributes W/ Threaded Filler Neck; Part Replacement Replaces 48349
- Cam Type: Threaded
- Cap Depth: 1.78"
- Neck Diameter: 1.77"
- Shell Diameter: 2.61"
- UPC: 033342062191
- Venting: Emission Control
- Part Description: 1988 Isuzu I-Mark Fuel Tank Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® Electric Fuel Pump for 1988 Isuzu I-Mark
PartNumber: E8023Product Specifications- Notes: Replacement Pump; Includes Wiring Harness, Isolator, Hose, Terminal & Clamps; 2" Dia
- Connector Gender: Male
- Connector Shape: Rectangle
- Fuel Pump Inlet Type: Strainer
- Fuel Sending Unit Included: No
- Gasket or Seal Included: No
- Inlet Attachment: Inlet-Strainer
- Inlet Count: 1
- Inlet Outside Diameter: 11.0
- Inlet Type: Strainer
- Internal or External: In Tank
- Internet Product Code (IPC): B8FC0901D9B
- Item Grade: OEM Standard Part
- Item has MSDS (SDS): No
- Length (Inch): 114.0
- Maximum Free Flow Rate (gph): 55
- Maximum Pressure (psi): 95
- MFG Brand Name: Airtex Products
- MFG Model # (Series): E8023
- Minimum Free Flow Rate: 33.0
- Minimum Free Flow Rate (gph): 55
- Minimum Pressure (psi): 60
- Mounting Hardware Included: No
- Muffler Outlet Diameter (in): 9.0
- Negative Ground: Yes
- Outlet Attachment: Outlet-HoseConnection
- Outlet Count: 1
- Outlet Fitting Thread Size: 5/16 Inch
- Outlet Quantity: 1
- Outlet Size: Outlet - .365
- Outlet Type: Hose Barb
- Package Contents: Pump and Kit
- Pump Type: Electric
- Regulator Included: No
- Seal And Lock Ring Included: No
- Strainer Included: No
- Supplier Company Name: Airtex Products
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- Universal Or Specific Fit: Specific
- UPC: 080044089971
- Voltage [V]: 12V
- Wiring Harness Included: Yes
- Part Description: 1988 Isuzu I-Mark Electric Fuel Pump
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® Fuel Pump Gasket for 1988 Isuzu I-Mark
PartNumber: FP2192Product Specifications- Notes: FUEL PUMP MOUNTING GASKET
- Gasket Included: N
- Item Grade: STANDARD REPLACEMENT
- Package Contents: GASKET
- Package Quantity: 1
- UPC: 080044012764
- Part Description: 1988 Isuzu I-Mark Fuel Pump Gasket
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® In-Line Electric Fuel Pump for 1988 Isuzu I-Mark
PartNumber: E9071Product Specifications- Notes: Universal Electric Pump; May be used to replace mechanical pump
- Gasket Included: N
- Hazardous Material: No
- Inlet Count: 1
- Inlet Type: Female Thread
- Item Grade: Standard Replacement
- Maximum Free Flow Rate (gph): 30
- Maximum Pressure Rate (psi): 4.5
- Minimum Free Flow Rate (gph): 20
- Minimum Pressure Rate (psi): 2.5
- Outlet Count: 1
- Outlet Size: 1/8" - 27
- Outlet Type: Female Thread
- Package Contents: Pump & Kit
- Package Quantity: 1
- UPC: 080044050315
- Warranty: Lifetime Limited Warranty
- Part Description: 1988 Isuzu I-Mark In-Line Electric Fuel Pump
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® Fuel Pump Spacer for 1988 Isuzu I-Mark
PartNumber: FP2193Product Specifications- Gasket or Seal Included: No
- Item Grade: STANDARD REPLACEMENT
- Mounting Hardware Included: No
- Package Contents: SPACER
- Package Quantity: 1
- UPC: 080044011262
- Part Description: 1988 Isuzu I-Mark Fuel Pump Spacer
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
STANT® Pre-Release Keyed Alike Fuel Cap for 1988 Isuzu I-Mark
PartNumber: 17501Product Specifications- Notes: Color Black
- Cap Depth: 2.375
- Color: Black
- Fuel Cap Venting: Emission Control
- Locking: Yes
- Material: Plastic
- Neck Diameter: 1.750
- Shell Diameter: 2.750
- Tether Included: No
- UPC: 333420190106
- Part Description: 1988 Isuzu I-Mark Pre-Release Keyed Alike Fuel Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® Fuel Pump Strainer for 1988 Isuzu I-Mark
PartNumber: FS134Product Specifications- Filter Material: Gradient Density
- Gasket Included: N
- Inlet Count: 1
- Inlet Type: PUSH FIT
- Internet Product Code (IPC): 3F4AAE2329F
- Item Grade: OEM Standard Part; STANDARD REPLACEMENT
- Item has MSDS (SDS): N
- MFG Brand Name: Airtex Products
- MFG Model # (Series): FS134
- MFG Name: Airtex Products
- Outlet Count: 1
- Package Contents: Fuel Strainer; PUMP & KIT
- Package Quantity: 1
- Smallest Filtered Particle (microns): 60
- Supplier Company Name: Airtex Products
- UPC: 080044101536
- Part Description: 1988 Isuzu I-Mark Fuel Pump Strainer
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
STANT® Regular Keyed Alike Fuel Cap for 1988 Isuzu I-Mark
PartNumber: 17591Product Specifications- Notes: Color Black
- Cap Depth: 2.625
- Color: Black
- Fuel Cap Venting: Emission Control
- Locking: Yes
- Material: Plastic
- Neck Diameter: 1.750
- Shell Diameter: 2.938
- Tether Included: No
- UPC: 333420179170
- Part Description: 1988 Isuzu I-Mark Regular Keyed Alike Fuel Cap
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® Fuel Pump Strainer for 1988 Isuzu I-Mark
PartNumber: FS139Product Specifications- Notes: with Plug Type Pump Electrical Connector
- Filter Material: Gradient Density
- Gasket or Seal Included: No
- Inlet Count: 1
- Inlet Type: PUSH FIT
- Internal or External: Internal
- Internet Product Code (IPC): 26CB855DAEC
- Item Grade: STANDARD REPLACEMENT
- Item has MSDS (SDS): No
- MFG Brand Name: Airtex Products
- MFG Model # (Series): FS139
- Mounting Hardware Included: No
- Outlet Count: 1
- Package Contents: PUMP & KIT
- Package Quantity: 1
- Smallest Filtered Particle (microns): 60
- Supplier Company Name: Airtex Products
- UPC: 080044139737
- Part Description: 1988 Isuzu I-Mark Fuel Pump Strainer
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L
Airtex® Fuel Pump Tank Seal for 1988 Isuzu I-Mark
PartNumber: TS8006Product Specifications- Gasket / Seal Material: Fuel-resistant polymer
- Gasket / Seal Thickness (mm): 0.12
- Gasket or Seal Included: No
- Internet Product Code (IPC): CE01BDCA1A0
- Item Grade: STANDARD REPLACEMENT
- Item has MSDS (SDS): No
- MFG Brand Name: Airtex Products
- MFG Model # (Series): TS8006
- Mounting Hardware Included: No
- Package Quantity: 1
- Supplier Company Name: Airtex Products
- UPC: 080044328469
- Part Description: 1988 Isuzu I-Mark Fuel Pump Tank Seal
Vehicle Fitment- 1988 Isuzu I-Mark | All Trims | 4 Cyl 1.5L