112 products about 1988 Ford E-250 Econoline A/C & Heating found
Product Specifications- Notes: Heater Only
- Bolt Hole Quantity: 2
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Rectangle
- Mounting Hardware Included: No
- OE Part Number: E35Y19A706A
- Package Contents: 1 Blower Motor Resistor
- Package Quantity: 1
- Packaging Type: Box
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 889245161055
- Wire Harness Length: 0
- Wire Quantity: 0
- Wiring Harness Included: No
- Part Description: 1988 Ford E-250 Econoline Hvac Blower Motor Resistor Kit
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | All Engines
Product Specifications- Notes: Cut to Length, 17";w/AC; Cut to Length, 12"
- Centerline Length: 50 ft
- End 1 Inside Diameter: .625 in
- End 2 Inside Diameter: .625 in
- Material: EPDM
- OE Part Number: 8990
- UPC: 072053066319
- Weight Per Length: 11.70 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 1988 Ford E-250 Econoline Safety Stripe Hvac Heater Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
![Four Seasons](/wwwasset/images/APP/brand/four_seasons.png)
Product Specifications- Notes: w/ E6DH Compressor; Reman w/ Clutch; Factory Air; Tangent Mounting;w/ E6DH Compressor; Reman w/ Clutch; Factory Air
- Belt Width IN: 0.875
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.000
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: E6DH
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 1.734375
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24321] / Black O-Ring
- O-Ring A Quantity: 2
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 127.000
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 5.000
- Pulley Outside Diameter: 5.000
- Pulley Ridge Diameter: 5.000
- Refrigerant Type: R134a
- Reman w/o Clutch: [57049] / Clutch Assembly
- Suc Prt Typ Note: W/ O-Ring
- Suction Port Type: Pad Mount
- Terminal Type: Pin
- UPC: 096361571105
- Part Description: 1988 Ford E-250 Econoline Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Show More Product Specifications- Notes: w/Calif Emission System
- Centerline Length (in): 12.1"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- OE Part Number: 42852
- UPC: 072053179439
- Part Description: 1988 Ford E-250 Econoline Lower Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
![Four Seasons](/wwwasset/images/APP/brand/four_seasons.png)
Product Specifications- Notes: w/ E6DH Compressor; New w/ Clutch; Factory Air;w/ E6DH Compressor; New w/ Clutch; Factory Air; Tangent Mounting
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.000
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: E6DH
- Discharge Port Type: Pad Mount
- Distance From Clutch To Mounting Flange: 1.734375
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24321] / Black O-Ring
- O-Ring A Quantity: 2
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- O-Ring C Number/Desc: Not Required
- O-Ring C Quantity: NR
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 5.000
- Pulley Outside Diameter: 5.000
- Pulley Ridge Diameter: 5.000
- Refrigerant Type: R134a
- Reman w/o Clutch: [57049]
- Suc Prt Typ Note: W/ O-Ring
- Suction Port Type: Pad Mount
- Terminal Type: Pin
- UPC: 096361581104
- Part Description: 1988 Ford E-250 Econoline A C Compressor With Clutch
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Show More Product Specifications- Notes: E100-350 Vans
- Other Names: Expansion Valve
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Ford E-250 Econoline Expansion Valve
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
$14.52 MSRP: $19.82
You Save: $5.30 (27%)
Product Specifications- Notes: w/Integral AC;w/Auxiliary AC
- Gasket or Seal Included: No
- Mounting Hardware Included: No
- OE Part Number: 4C2Z 19A706-BA, E7TZ19A706A
- Package Contents: Blower Motor Resistor and Instructions
- Package Quantity: 1
- Packaging Type: Box
- Terminal Type: Blade
- UPC: 019495290667
- Part Description: 1988 Ford E-250 Econoline Hvac Blower Motor Resistor Kit
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | All Engines
Product Specifications- Notes: W/Aux. Heater
- Centerline Length (in): 19.6"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053178814
- Part Description: 1988 Ford E-250 Econoline Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
Product Specifications- Notes: Rear Unit
- Other Names: Blower Motor
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Ford E-250 Econoline Blower Motor
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
$36.57 MSRP: $49.98
You Save: $13.41 (27%)
Product Specifications- Notes: Calif
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 6
- UPC: 038244598489
- Part Description: 1988 Ford E-250 Econoline Lower Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
![Four Seasons](/wwwasset/images/APP/brand/four_seasons.png)
Product Specifications- Notes: w/FS6 Compressor; New w/Clutch; Factory Air; Ear Mount
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.000
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: FS6
- Discharge Port Type: Block Mount
- Distance From Clutch To Mounting Flange: 1.703125
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New Compressor w/o Clutch: [58037]
- New or Reman: New
- O-Ring A Number/Desc: [24613] / Green O-Ring
- O-Ring A Quantity: 4
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- O-Ring C Number/Desc: Not Required
- O-Ring C Quantity: NR
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 5.000
- Pulley Outside Diameter: 5.000
- Pulley Ridge Diameter: 5.000
- Refrigerant Type: R134a
- Reman w/o Clutch: [57037]
- Suc Prt Typ Note: W/ O-Ring
- Suction Port Type: Block Mount
- Terminal Type: Pin
- UPC: 096361581111
- Part Description: 1988 Ford E-250 Econoline A C Compressor With Clutch
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Product Specifications- Notes: wo/Auxiliary AC
- Mounting Hardware Included: No
- OE Part Number: 4C2Z 19A706-AA, F6UZ19A706AA
- Package Contents: Blower Motor Resistor and Instructions
- Package Quantity: 1
- Packaging Type: Box
- Terminal Type: Blade
- UPC: 019495227809
- Part Description: 1988 Ford E-250 Econoline Hvac Blower Motor Resistor
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | All Engines
Product Specifications- Notes: w/AC
- Centerline Length (in): 12.4"
- Inside Diameter 1 (in): 0.62"
- Inside Diameter 2 (in): 0.75"
- Number of Branches: 0
- UPC: 072053178975
- Part Description: 1988 Ford E-250 Econoline Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
Product Specifications- Notes: w/AC
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 3/4
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 10
- UPC: 038244598199
- Part Description: 1988 Ford E-250 Econoline Inlet Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
![Four Seasons](/wwwasset/images/APP/brand/four_seasons.png)
Product Specifications- Notes: w/ SD709 Compressor; New w/ Clutch; Dealer Air; Direct Mount
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.859375
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Comp Head Prt Config: Top-Vert O-Ring
- Compatible Refrigerant Oil Type: PAG 100
- Compressor Head Type: FG/FJ
- Compressor Type: SD709
- Discharge Port Type: O-Ring
- Distance From Clutch To Mounting Flange: 1.703125
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24610] / Green O-Ring
- O-Ring B Quantity: 1
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 123.190
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.859375
- Pulley Outside Diameter: 4.859375
- Pulley Ridge Diameter: 4.859375
- Refrigerant Type: R134a
- Suction Port Type: O-Ring
- Terminal Type: Bullet
- UPC: 096361585812
- Part Description: 1988 Ford E-250 Econoline A C Compressor With Clutch
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Show More Product Specifications- Notes: wo/Auxiliary AC
- Gasket or Seal Included: Yes
- Mounting Hardware Included: No
- OE Part Number: 4C2Z 19A706-AA, F6UZ19A706AA
- Package Contents: Blower Motor Resistor and Instructions
- Package Quantity: 1
- Packaging Type: Box
- Terminal Type: Blade
- UPC: 019495272984
- Part Description: 1988 Ford E-250 Econoline Hvac Blower Motor Resistor Kit
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | All Engines
Product Specifications- Notes: Heater Hose Tube; 5/8" to 5/8"; Packaging Type: Clamshell; Pkg Quantity: 1
- Fitting Angle: Straight
- Fitting Attachment End 1: Quick Disconnect
- Fitting Attachment End 2: Hose Barb
- Fitting Size End 1 (in): 5/8"
- Fitting Size End 2 (in): 5/8"
- Material: Plastic
- OE Part Number: 15119175, 15139564, E69Z 18D435-A
- Quick Connect System: Yes
- UPC: 019495026389
- Part Description: 1988 Ford E-250 Econoline Hvac Heater Hose Connector
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | All Engines
Product Specifications- Notes: Cut to fit
- Centerline Length (in): 15.6"
- Inside Diameter 1 (in): 0.62"
- Inside Diameter 2 (in): 0.75"
- Number of Branches: 0
- UPC: 072053178098
- Part Description: 1988 Ford E-250 Econoline Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
Product Specifications- Notes: E100-350 Vans
- Item Dimensions: 0.1 x 4.1 x 7.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: F1CZ-19D644-A
- Part Description: 1988 Ford E-250 Econoline Pressure Relief Valve
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
$23.36 MSRP: $37.27
You Save: $13.91 (38%)
Product Specifications- Notes: E100-350 Vans
- Item Dimensions: 0.1 x 4.1 x 7.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: F1CZ-19D644-A
- Part Description: 1988 Ford E-250 Econoline Pressure Relief Valve
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
$23.36 MSRP: $37.27
You Save: $13.91 (38%)
Product Specifications- Notes: E100-350 Vans
- Item Dimensions: 0.1 x 4.1 x 7.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: F1CZ-19D644-A
- Part Description: 1988 Ford E-250 Econoline Pressure Relief Valve
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
$23.36 MSRP: $37.27
You Save: $13.91 (38%)
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 3/4
- End 2 Inside Diameter: 5/8
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 20
- UPC: 038244597925
- Part Description: 1988 Ford E-250 Econoline Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
Show More Product Specifications- Notes: w/FS6 Compressor; New w/o Clutch; Factory Air; Ear Mount
- Clutch Included: No
- Coil Clock Position: NR
- Coil Voltage: NR
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: FS6
- Discharge Port Type: Pad Mount
- Mounting Hardware: Not Included
- Mounting Type: Ear Mount
- New or Reman: New
- O-Ring A Number/Desc: [24613] / Green O-Ring
- O-Ring A Quantity: 4
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Pulley Belt Type: Non-Clutch
- Pulley Groove Quantity: NR
- Refrigerant Type: R134a
- Suc Prt Typ Note: W/ O-Ring
- Suction Port Type: Pad Mount
- UPC: 096361580374
- Part Description: 1988 Ford E-250 Econoline A C Compressor Without Clutch
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Product Specifications- Centerline Length (in): 15.7"
- Inside Diameter 1 (in): 0.62"
- Number of Branches: 0
- UPC: 072053179576
- Part Description: 1988 Ford E-250 Econoline Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Product Specifications- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 3/4
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 13
- UPC: 038244597918
- Part Description: 1988 Ford E-250 Econoline Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
Product Specifications- Notes: w/ E6DH Compressor; Reman w/o Clutch; Factory Air;w/ E6DH Compressor; Reman w/o Clutch; Factory Air; Tangent Mounting
- Clutch Included: No
- Coil Clock Position: Non Clutch
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: E6DH
- Discharge Port Type: O-Ring / Gasket
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24321] / Black O-Ring
- O-Ring A Quantity: 2
- O-Ring B Number/Desc: Not Required
- O-Ring B Quantity: NR
- Pulley Belt Type: Non-Clutch
- Pulley Groove Quantity: NR
- Refrigerant Type: R134a
- Suc Prt Typ Note: W/ O-Ring
- Suction Port Type: O-Ring / Gasket
- UPC: 096361570498
- Part Description: 1988 Ford E-250 Econoline Reman Ford E6DH Compressor w/o Clutch
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Show More Product Specifications- Notes: w/ E6DH Compressor; w/ FS6 Compressor; New; Factory Air
- Belt Type: Serpentine
- Belt Width IN: 0.875
- Can Size: w/ Coil
- Clutch Maximum Diameter: 5.000
- Coil: w/ Coil
- Coil Voltage: 12
- Color: Black
- Distance From Clutch To Mounting Flange: 1.734375
- Groove: 6
- Lead Wire : One Piece Coil
- Material: Steel
- Meets / Exceeds OEM: Yes
- Mounting Type: Snap Ring
- Rotation: CCW-CW
- Style: FS6
- Thermal Or Non Thermal: NR
- UPC: 096361478541
- Part Description: 1988 Ford E-250 Econoline A C Compressor Clutch
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.8L
Show More Product Specifications- Notes: W/O Aux. Heater; Cut to fit;Cut to fit
- Angle: 90
- Arm Length 1 (in): 4"
- Arm Length 2 (in): 12"
- Centerline Length (in): 16"
- Inside Diameter 1 (in): 0.625"
- UPC: 072053062014
- Part Description: 1988 Ford E-250 Econoline 90 Degree Hvac Heater Molded Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 6 Cyl 4.9L
Product Specifications- Notes: w/AC, w/Aux. Heater;w/AC
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 5/8
- End 2 Inside Diameter: 5/8
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R3 Class D-1, SAE J1684 Type EC
- Trunk Height: 8
- UPC: 038244598625
- Part Description: 1988 Ford E-250 Econoline Small Id Hvac Heater Hose
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | 8 Cyl 5.0L
Product Specifications- Core Depth Fraction: 3
- Core Depth MM: 76.200
- Core Height Fraction: 8-1/8
- Core Height MM: 206.375
- Core Width Fraction: 11-1/4
- Core Width MM: 285.750
- Depth: 3.000
- Height: 8.125
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 2
- O-Ring B Number/Desc: [24612] / Green O-Ring
- O-Ring B Quantity: 2
- O-Ring C Number/Desc: [38639] / Orifice Tube
- O-Ring C Quantity: 1
- Outlet Fitting Outside Diameter: No. 12
- UPC: 096361545502
- Width: 11.250
- Part Description: 1988 Ford E-250 Econoline A C Evaporator Core
More Info Vehicle Fitment- 1988 Ford E-250 Econoline | All Trims | All Engines