< Back ×
My Vehicle Change Vehicle
1987 Nissan 200SX
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 1987 Nissan 200SX
PartNumber: 21-5729Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Import
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Splined
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Hose Barb
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 1987 Nissan 200SX Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 1987 Nissan 200SX | All Trims | 6 Cyl 3.0L
$130.35
National® Power Steering Pump Shaft Bearing for 1987 Nissan 200SX
PartNumber: 203-FFProduct Specifications- Notes: Two Seal Design; w/Hitachi Alternator; w/50, 60 Amp Alternator
- Bore: 0.669"
- Inner Race Bore: 0.669"
- Inner Race Outside Diameter: 5.512"
- Inner Race Radius: 0.024"
- Inner Race Width: 0.472"
- Outer Race Outside Diameter: 1.575"
- Outer Race Radius: 0.024"
- Outer Race Width: 0.472"
- Outside Diameter: 1.575"
- Width Belt: 0.472"
- Part Description: 1987 Nissan 200SX Power Steering Pump Shaft Bearing
Vehicle Fitment- 1987 Nissan 200SX | All Trims | All Engines
$7.88
Cardone Reman® Power Steering Filter for 1987 Nissan 200SX
PartNumber: 20-0012FProduct Specifications- Notes: Our Magnetic In-Line Filter measures 2 1/4" X 5" w/12 mm Outer Dia Neck (Designed For Use w/1/2" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 1/2"
- Housing Material: Aluminum
- Inlet Diameter: 0.527"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.527"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617974172
- Part Description: 1987 Nissan 200SX Power Steering Filter
Vehicle Fitment- 1987 Nissan 200SX | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1987 Nissan 200SX
PartNumber: 20-0038FProduct Specifications- Notes: with Aluminum Housing;Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.395"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.397"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 082617953122
- Part Description: 1987 Nissan 200SX Power Steering Filter
Vehicle Fitment- 1987 Nissan 200SX | All Trims | All Engines
$20.45Cardone Reman® Power Steering Filter for 1987 Nissan 200SX
PartNumber: 20-0058FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/5/8" Outer Dia Neck (For 5/8" ID Hose) & Will Only Fit Applications Where Space Allows.
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 5/8"
- Housing Material: Aluminum
- Inlet Diameter: 0.651"
- Installation Hardware Included: Hose Clamps (2)
- Outlet Diameter: 0.654"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps
- Product Condition: New
- UPC: 884548041394
- Part Description: 1987 Nissan 200SX Power Steering Filter
Vehicle Fitment- 1987 Nissan 200SX | All Trims | All Engines
$20.05Cardone Reman® Power Steering Filter for 1987 Nissan 200SX
PartNumber: 20-P038FProduct Specifications- Notes: Our MagnaPure In-Line Filter measures 1.25" X 3" w/ 3/8" Outer Diameter Neck (For 3/8" ID Hose) And Will Only Fit Applications Where Space Allows.;with Plastic Housing
- E-Waste: No
- Filter Material: Aluminum
- Filter Type: Inline
- Hose Inner Diameter (in): 3/8"
- Housing Material: Plastic
- Inlet Diameter: 0.406"
- Installation Hardware Included: Hose Clamps (2), O-Ring
- Outlet Diameter: 0.415"
- Package Contents: Power Steering Filter, Instruction Sheet, (2) Hose Clamps, O-Ring
- Product Condition: New
- UPC: 884548053915
- Part Description: 1987 Nissan 200SX Power Steering Filter
Vehicle Fitment- 1987 Nissan 200SX | All Trims | All Engines
$15.50
Gates® Power Steering Pump Seal Kit for 1987 Nissan 200SX
PartNumber: 348870Product Specifications- UPC: 072053418057
- Part Description: 1987 Nissan 200SX Power Steering Pump Seal Kit
Vehicle Fitment- 1987 Nissan 200SX | All Trims | 4 Cyl 1.8L
- 1987 Nissan 200SX | All Trims | 4 Cyl 2.0L
- 1987 Nissan 200SX | All Trims | 6 Cyl 3.0L
OEM (Genuine) 1987 Nissan 200SX Pump Power Steering
PartNumber: 49110-01F00
Product Specifications- Other Names: Power Steering Pump
- Item Dimensions: 10.5 x 9.4 x 7.8 inches
- Item Weight: 7.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan 200SX Pump Power Steering
Vehicle Fitment- 1987 Nissan 200SX | Base, SE, Turbo, XE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1987 Nissan 200SX Pump Assy-Power Steering
PartNumber: 49110-31F00Product Specifications- Notes: 200sx
- Other Names: Power Steering Pump
- Item Dimensions: 10.5 x 9.4 x 7.8 inches
- Item Weight: 8.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan 200SX Pump Assy-Power Steering
Vehicle Fitment- 1987 Nissan 200SX | SE, XE | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1987 Nissan 200SX Boot Kit-Steering Gear
PartNumber: 48203-05F26
Product Specifications- Notes: Power Steering; 200sx; Left Side
- Location: Passenger Side
- Other Names: Boot, Boot Kit, Tie Rod Boot
- Item Dimensions: 8.2 x 2.5 x 2.6 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 48203-05F00, 49203-05F26
- Part Description: 1987 Nissan 200SX Boot Kit-Steering Gear
Vehicle Fitment- 1987 Nissan 200SX | Base, SE, Turbo, XE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1987 Nissan 200SX Boot-Steer Gear
PartNumber: 48204-05F00
Product Specifications- Notes: Power Steering
- Location: Driver Side
- Other Names: Tie Rod Boot
- Item Dimensions: 6.7 x 2.6 x 2.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan 200SX Boot-Steer Gear
Vehicle Fitment- 1987 Nissan 200SX | Base, SE, Turbo, XE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1987 Nissan 200SX Tank Reservoir
PartNumber: 49115-01F01
Product Specifications- Other Names: Reservoir Tank
- Item Dimensions: 7.3 x 6.0 x 5.7 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan 200SX Tank Reservoir
Vehicle Fitment- 1987 Nissan 200SX | Base, SE, Turbo, XE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1987 Nissan 200SX PULLEY Pump P/S
PartNumber: 49586-V5400Product Specifications- Other Names: Pulley
- Item Dimensions: 4.5 x 4.3 x 1.5 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan 200SX PULLEY Pump P/S
Vehicle Fitment- 1987 Nissan 200SX | Base, SE, Turbo, XE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
OEM (Genuine) 1987 Nissan 200SX Seal Kt Housing
PartNumber: 49297-05F91Product Specifications- Notes: 200sx
- Other Names: Housing Seal, Seal Kit
- Item Dimensions: 1.5 x 1.5 x 0.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 49297-05F28
- Part Description: 1987 Nissan 200SX Seal Kt Housing
Vehicle Fitment- 1987 Nissan 200SX | Base, SE, Turbo, XE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
Cardone Reman® Remanufactured Power Steering Pump Without Reservoir for 1987 Nissan 200SX
PartNumber: 21-5689Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Import
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Splined
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Hose Barb
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 1987 Nissan 200SX Remanufactured Power Steering Pump Without Reservoir
Vehicle Fitment- 1987 Nissan 200SX | All Trims | 4 Cyl 1.8L
- 1987 Nissan 200SX | All Trims | 4 Cyl 2.0L
OEM (Genuine) 1987 Nissan 200SX Seal Kit
PartNumber: 49365-V0226Product Specifications- Notes: 200sx
- Other Names: Pinion Seal, Seal
- Item Dimensions: 5.6 x 4.0 x 0.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1987 Nissan 200SX Seal Kit
Vehicle Fitment- 1987 Nissan 200SX | Base, SE, Turbo, XE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS