30 products about 1984 Chrysler Laser Ignition, Distributors & ECM found
Product Specifications- Notes: w/Tilt Steering Wheel
- Finish: Chrome
- Housing Material: Metal
- Installation Hardware Included: No
- Key Programmable: No
- Key Quantity: 2
- Lock Material: Metal
- Mounting Hardware Included: No
- UPC: 885484689299
- Wiring Harness Included: No
- Part Description: 1984 Chrysler Laser Ignition Lock Cylinder
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | All Engines
Product Specifications- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Round
- Length: 46.34 mm
- Mounting Hardware Included: No
- Terminal Gender: Male
- Terminal Quantity: 1
- Terminal Type: Threaded
- Threaded End Diameter: 9.5 mm
- UPC: 724620074493
- Wiring Harness Included: No
- Part Description: 1984 Chrysler Laser Ignition Knock Sensor
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | 4 Cyl 2.2L
Product Specifications- Connector Gender: Female
- Ignition Type: Standard
- Mounting Bracket Included: No
- Oil Filled: Yes
- Requires External Resistor: Yes
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Threaded
- UPC: 724620078163
- Voltage: 12 Volts
- Part Description: 1984 Chrysler Laser Ignition Coil
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: with OE # 5213581;This Unit is Pre-Programmed at the Factory;Power Module
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 10, 12
- Part Description: 1984 Chrysler Laser Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: with OE # 5226197;This Unit is Pre-Programmed at the Factory;Power Module
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 10, 12
- Part Description: 1984 Chrysler Laser Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: Logic Module;with OE # 5213921, 5226203, 5226388, 5227502;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 21, 21
- Part Description: 1984 Chrysler Laser Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | 4 Cyl 2.2L
Product Specifications- Item Dimensions: 16.9 x 10.5 x 9.5 inches
- Item Weight: 5.30 Pounds
- Part Description: 1984 Chrysler Laser Module-S.B.E.C.
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
$503.87 MSRP: $737.00
You Save: $233.13 (32%)
Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;Logic Module;with OE # 5213907, 5226382, 5226870
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 21, 21
- Part Description: 1984 Chrysler Laser Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: Power Module;with OE # 5213574;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- E-Waste: Yes
- Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 10, 12
- Part Description: 1984 Chrysler Laser Remanufactured Engine Control Computer
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | 4 Cyl 2.2L
Product Specifications- Notes: W/Tilt
- Other Names: Cylinder & Keys, Ignition Switch
- Item Dimensions: 10.9 x 6.4 x 5.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Chrysler Laser Ignition & Starter
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Notes: W/Tilt
- Other Names: Cylinder & Keys, Ignition Switch
- Item Dimensions: 10.9 x 6.4 x 5.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Chrysler Laser Ignition & Starter
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Color/Finish: black, white
- Mount Type: Push On
- UPC: 841266020568
- Part Description: 1984 Chrysler Laser Ignition Distributor Rotor
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | All Engines
Product Specifications- Notes: 4-2.2
- Other Names: Pick-Up Coil, Plate
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Chrysler Laser Switch
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Notes: 4-2.2
- Other Names: Pick-Up Coil, Plate
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Chrysler Laser Switch
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Attachment Method: Screw
- Contact Terminal Material: Aluminum
- Contents: Distributer Cap
- Distributor Cap Color: Black
- Distributor Cap Material: Polypropylene
- Distributor Vent: Yes
- Gasket or Seal Included: No
- Ignition Rotor Included: No
- Instructions Included: No
- Mount Type: Screw
- Screws included: Yes
- Spark Plug Wires Included: No
- Terminal Quantity: 5
- Tower Position: Top
- UPC: 841266031250
- Part Description: 1984 Chrysler Laser Ignition Distributor Cap
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | All Engines
Product Specifications- Attachment Method: Bolt-On
- Color: Blue
- Connector Gender: Female (1)
- Connector Quantity: 1
- Mounting Bracket Included: No
- Mounting Location: External
- Oil Filled: Yes
- Terminal Gender: Male (1)
- Terminal Quantity: 2
- Terminal Type: Stud
- UPC: 841266012297
- Voltage: 12 Volts
- Part Description: 1984 Chrysler Laser Ignition Coil
More Info Vehicle Fitment- 1984 Chrysler Laser | All Trims | All Engines
Product Specifications- Notes: All Models; 4-2.2 & 2.5
- Other Names: Coil, Ignition Coil
- Item Dimensions: 9.7 x 5.1 x 3.3 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Chrysler Laser Ignition Coil Replacement
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: 4-2.2
- Other Names: Distributor Cap
- Item Weight: 0.60 Pounds
- Part Description: 1984 Chrysler Laser Distributor
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: W/O Tilt
- Other Names: Cylinder & Keys, Ignition Switch
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Chrysler Laser Switch-Ign & Starter
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: W/O Tilt
- Other Names: Cylinder & Keys, Ignition Switch
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Chrysler Laser Switch-Ign & Starter
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: All Models
- Part Description: 1984 Chrysler Laser Ignition Lock Cylinder
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Notes: All Models
- Part Description: 1984 Chrysler Laser Ignition Switch
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Notes: All Models
- Part Description: 1984 Chrysler Laser Ignition Lock Key
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Notes: All Models; W/Tilt Wheel; W/Daytona, Lazer
- Part Description: 1984 Chrysler Laser Ignition Lock Cylinder
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: All Models; W/Tilt Wheel; W/Daytona, Lazer
- Part Description: 1984 Chrysler Laser Ignition Switch
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: 4-2.2; W/Turbo; W/Turbo
- Part Description: 1984 Chrysler Laser Distributor
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Notes: All Models; Auto Trans; W/Calif;All Models; Manual Trans; W/Calif
- Part Description: 1984 Chrysler Laser Engine Control Module
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: 4-2.2
- Part Description: 1984 Chrysler Laser Distributor Rotor
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS
Product Specifications- Notes: 4-2.2; W/O Turbo; W/O Turbo
- Other Names: Distributor Assembly
- Item Dimensions: 12.2 x 8.4 x 6.8 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: R0212146
- Part Description: 1984 Chrysler Laser Dist Assembly-Single Switch TBI
More Info Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
Product Specifications- Notes: All Models; Auto Trans; W/O Calif;All Models; Manual Trans; W/O Calif
- Part Description: 1984 Chrysler Laser Engine Control Module
Vehicle Fitment- 1984 Chrysler Laser | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS