Eagle has various quality aftermarket car parts. It is really popular and sells well. During the development of Eagle, many popular Eagle distributor cap parts have been built. The distributor cap is used to protect the internal parts of the distributor from dirt, filth, and debris. It protects the rotor as the rotor has to transfer electricity to the spark plugs. It has a single post for each cylinder and there is a current from the ignition coil into the distributor. The distributor cap houses the internal contacts which distribute the spark to each spark plug on the engine.
However, the parts may have issues as it wears out faster due to frequent use. So, the worn-out Eagle distributor cap parts need to be repaired or replaced for better performance. The removal process is as follows: First, disconnect the negative battery terminal. Next, mark wires with cylinder numbers before removal to avoid a mix-up of cylinders. Then, remove the spark plug wires off the distributor cap. Loosen the remaining screws or nuts on the cap to loosen the cap. Finally, gently lift the cap off the distributor to avoid further damage to engine parts We guarantee consumers a reasonable and affordable shipping price. Get helpful parts at a low price with just a few clicks. You can choose a variety of Eagle distributor cap parts as you like.