BMW 135i Rack and Pinion Boot

The BMW 135i began in the first generation of the series in 2007 coded as E82 or E88, depending on the body style. For its good performance, this car was regarded as a perfect successor to the previous models. During the development of the BMW 135i, many popular parts have been built such as rack and pinion boot parts. At one point, the steering rack boots were composed of plastic but now rack boots are made from rubber. A faulty BMW 135i rack and pinion boot can cause rough steering, or the steering rack can fail and lead to a bad driving experience.

While maintenance and upgrades for the rack and pinion boot are required after a long time of usage. The rack and pinion boot parts are used to prevent any contaminants from entering the rack and pinion system. The removal process for the BMW 135i rack and pinion boot is as follows. Firstly, raise and support the vehicle. Then, remove the front steering components (inner and outer tie rod ends). Finally, cut the clamps holding the boots in place. Our large assortment covers the majority of classic BMW 135i vehicles. Customers can choose from a lot of BMW 135i parts at varied prices online. And you can get the great rack and pinion boot parts on our site.